This Annex establishes requirements for the administration and management system to be fulfilled by the Agency and Member States for the implementation and enforcement of Regulation (EC) No 216/2008 and its Implementing Rules regarding civil aviation air operations.
The competent authority shall provide all legislative acts, standards, rules, technical publications and related documents to relevant personnel in order to allow them to perform their tasks and to discharge their responsibilities.
The Agency shall develop acceptable means of compliance (‘AMC’) that may be used to establish compliance with Regulation (EU) 2018/1139 and its delegated and implementing acts.
Alternative means of compliance may be used to establish compliance with Regulation (EU) 2018/1139 and its delegated and implementing acts.
The competent authority shall establish a system to consistently evaluate whether the alternative means of compliance used by itself or by organisations and persons under its oversight comply with Regulation (EU) 2018/1139 and its delegated and implementing acts. That system shall include procedures to limit, revoke or amend approved alternative means of compliance, if it has been demonstrated by the competent authority that those alternative means of compliance do not comply with Regulation (EU) 2018/1139 and delegated and implementing acts adopted on its basis.
The competent authority shall evaluate all alternative means of compliance proposed by an organisation in accordance:
with point ORO.GEN.120(b) of Annex III (Part-ORO) to this Regulation;
for balloons with point BOP.ADD.010 of Annex II (Part-BOP) to Commission Regulation (EU) 2018/395 [Commission Regulation (EU) 2018/395 of 13 March 2018 laying down detailed rules for the operation of balloons pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council (OJ L 71, 14.3.2018, p. 10).]; or
for sailplanes with point SAO.DEC.100(c) of Annex II (Part-SAO) to Commission Implementing Regulation (EU) 2018/1976 [Commission Implementing Regulation (EU) 2018/1976 of 14 December 2018 laying down detailed rules for the operation of sailplanes pursuant to Regulation (EU) 2018/1139 of the European Parliament and of the Council (OJ L 326, 20.12.2018, p. 64).];
by analysing the documentation provided and, if considered necessary, conducting an inspection of the organisation.
When the competent authority finds that the alternative means of compliance are in accordance with the Implementing Rules, it shall without undue delay:
notify the applicant that the alternative means of compliance may be implemented and, if applicable, amend the approval, specialised operation authorisation or certificate of the applicant accordingly; and
notify the Agency of their content, including copies of all relevant documentation.
inform other Member States about alternative means of compliance that were accepted.
When the competent authority itself uses alternative means of compliance to achieve compliance with Regulation (EC) No 216/2008 and its Implementing Rules it shall:
make them available to all organisations and persons under its oversight; and
without undue delay notify the Agency.
The competent authority shall provide the Agency with a full description of the alternative means of compliance, including any revisions to procedures that may be relevant, as well as an assessment demonstrating that the Implementing Rules are met.
The competent authority shall without undue delay notify the Agency in case of any significant problems with the implementation of Regulation (EC) No 216/2008 and its Implementing Rules.
The competent authority shall provide the Agency with safety-significant information stemming from the occurrence reports it has received.
The competent authority of the Member State shall provide the Agency as soon as possible with safety-significant information stemming from the information security reports it has received pursuant to point IS.I.OR.230 of Annex II (Part-IS.I.OR) to Implementing Regulation (EU) 2023/203.
Without prejudice to Regulation (EU) No 376/2014 of the European Parliament and of the Council [Regulation (EU) No 376/2014 of the European Parliament and of the Council of 3 April 2014 on the reporting, analysis and follow-up of occurrences in civil aviation, amending Regulation (EU) No 996/2010 of the European Parliament and of the Council and repealing Directive 2003/42/EC of the European Parliament and of the Council and Commission Regulations (EC) No 1321/2007 and (EC) No 1330/2007 (OJ L 122, 24.4.2014, p. 18).], the competent authority shall implement a system to appropriately collect, analyse and disseminate safety information.
The Agency shall implement a system to appropriately analyse any relevant safety information received and without undue delay provide to Member States and the Commission any information, including recommendations or corrective actions to be taken, necessary for them to react in a timely manner to a safety problem involving products, parts, appliances, persons or organisations subject to Regulation (EC) No 216/2008 and its Implementing Rules.
Upon receiving the information referred to in (a) and (b), the competent authority shall take adequate measures to address the safety problem.
Measures taken under (c) shall immediately be notified to all persons or organisations which need to comply with them under Regulation (EC) No 216/2008 and its Implementing Rules. The competent authority shall also notify those measures to the Agency and, when combined action is required, the other Member States concerned.
The competent authority shall implement a system to appropriately collect, analyse, and disseminate information related to information security incidents and vulnerabilities with a potential impact on aviation safety that are reported by organisations. This shall be done in coordination with any other relevant authorities responsible for information security or cybersecurity within the Member State to increase the coordination and compatibility of reporting schemes.
The Agency shall implement a system to appropriately analyse any relevant safety-significant information received in accordance with point ARO.GEN.125(c), and without undue delay provide the Member States and the Commission with any information, including recommendations or corrective actions to be taken, necessary for them to react in a timely manner to an information security incident or vulnerability with a potential impact on aviation safety involving products, parts, non-installed equipment, persons or organisations subject to Regulation (EU) 2018/1139 and its delegated and implementing acts.
Upon receiving the information referred to in points (a) and (b), the competent authority shall take adequate measures to address the potential impact on aviation safety of the information security incident or vulnerability.
Measures taken in accordance with point (c) shall immediately be notified to all persons or organisations that shall comply with them under Regulation (EU) 2018/1139 and its delegated and implementing acts. The competent authority of the Member State shall also notify those measures to the Agency and, when combined action is required, the competent authorities of the other Member States concerned.
The competent authority shall establish and maintain a management system, including as a minimum:
documented policies and procedures to describe its organisation, means and methods to achieve compliance with Regulation (EC) No 216/2008 and its Implementing Rules. The procedures shall be kept up to date and serve as the basic working documents within that competent authority for all related tasks;
a sufficient number of personnel to perform its tasks and discharge its responsibilities. Such personnel shall be qualified to perform their allocated tasks and have the necessary knowledge, experience, initial and recurrent training to ensure continuing competence. A system shall be in place to plan the availability of personnel, in order to ensure the proper completion of all tasks;
adequate facilities and office accommodation to perform the allocated tasks;
a function to monitor compliance of the management system with the relevant requirements and adequacy of the procedures including the establishment of an internal audit process and a safety risk management process. Compliance monitoring shall include a feedback system of audit findings to the senior management of the competent authority to ensure implementation of corrective actions as necessary; and
a person or group of persons, ultimately responsible to the senior management of the competent authority for the compliance monitoring function.
The competent authority shall, for each field of activity, including management system, appoint one or more persons with the overall responsibility for the management of the relevant task(s).
The competent authority shall establish procedures for participation in a mutual exchange of all necessary information and assistance with other competent authorities concerned including on all findings raised and follow-up actions taken as a result of oversight of persons and organisations exercising activities in the territory of a Member State, but certifiedor authorised byor making declarations to the competent authority of another Member State or the Agency.
A copy of the procedures related to the management system and their amendments shall be made available to the Agency for the purpose of standardisation.
In addition to the requirements contained in point (a), the management system established and maintained by the competent authority shall comply with Annex I (Part-IS.AR) to Implementing Regulation (EU) 2023/203 in order to ensure the proper management of information security risks which may have an impact on aviation safety.
Tasks related to the initial certification, specialised operation authorisation or continuing oversight of persons or organisations subject to Regulation (EC) No 216/2008 and its Implementing Rules shall be allocated by Member States only to qualified entities. When allocating tasks, the competent authority shall ensure that it has:
put a system in place to initially and continuously assess that the qualified entity complies with Annex V to Regulation (EC) No 216/2008.
This system and the results of the assessments shall be documented.
established a documented agreement with the qualified entity, approved by both parties at the appropriate management level, which clearly defines:
the tasks to be performed;
the declarations, reports and records to be provided;
the technical conditions to be met in performing such tasks;
the related liability coverage; and
the protection given to information acquired in carrying out such tasks.
The competent authority shall ensure that the internal audit process and safety risk management process required by ARO.GEN.200(a)(4) covers all certification, authorisationor continuing oversight tasks performed on its behalf.
For the certification and oversight of the organisation’s compliance with point ORO.GEN.200A, the competent authority may allocate tasks to qualified entities in accordance with point (a), or to any relevant authority responsible for information security or cybersecurity within the Member State. When allocating tasks, the competent authority shall ensure that:
all aspects related to aviation safety are coordinated and taken into account by the qualified entity or relevant authority;
the results of the certification and oversight activities performed by the qualified entity or relevant authority are integrated in the overall certification and oversight files of the organisation;
its own information security management system established in accordance with point ARO.GEN.200(e) covers all the certification and continuing oversight tasks performed on its behalf.
The competent authority shall have a system in place to identify changes that affect its capability to perform its tasks and discharge its responsibilities as defined in Regulation (EC) No 216/2008 and its Implementing Rules. This system shall enable it to take action as appropriate to ensure that its management system remains adequate and effective.
The competent authority shall update its management system to reflect any change to Regulation (EC) No 216/2008 and its Implementing Rules in a timely manner, so as to ensure effective implementation.
The competent authority shall notify the Agency of changes affecting its capability to perform its tasks and discharge its responsibilities as defined in Regulation (EC) No 216/2008 and its Implementing Rules.
The competent authority shall establish a system of record-keeping providing for adequate storage, accessibility and reliable traceability of:
the management system’s documented policies and procedures;
training, qualification and authorisation of its personnel;
the allocation of tasks, covering the elements required by ARO.GEN.205 as well as the details of tasks allocated;
certification processes and continuing oversight of certified organisations;
the process of authorisation of a high risk commercial specialised operation and continuing oversight of an authorisation holder;
declaration processes and continuing oversight of declared organisations;
details of training courses provided by certified organisations, and if applicable, records relating to FSTDs used for such training;
oversight of persons and organisations exercising activities within the territory of the Member State, but overseen, certified or authorised by the competent authority of another Member State or the Agency, as agreed between these authorities;
oversight of operations of other-than complex motor-powered aircraft by non-commercial operators;
the evaluation and notification to the Agency of alternative means of compliance proposed by organisations subject to certification, or authorisation and the assessment of alternative means of compliance used by the competent authority itself;
findings, corrective actions and date of action closure;
enforcement measures taken;
safety information and follow-up measures; and
the use of flexibility provisions in accordance with Article 14 of Regulation (EC) No 216/2008.
The competent authority shall maintain a list of all organisation certificates and specialised operations authorisations it issued as well as declarations it received.
All records shall be kept for the minimum period specified in this Regulation. In the absence of such indication, records shall be kept for a minimum period of five years subject to applicable data protection law.
The competent authority shall verify:
compliance with the requirements applicable to organisations or type of operations prior to the issue of a certificate, approval or authorisation, as applicable;
continued compliance with the applicable requirements of organisations it has certified, specialised operations it has authorised and organisations from which it received a declaration;
continued compliance with the applicable requirements of non-commercial operators of other-than complex motor-powered aircraft; and
implementation of appropriate safety measures mandated by the competent authority as defined in ARO.GEN.135(c) and (d).
This verification shall:
be supported by documentation specifically intended to provide personnel responsible for safety oversight with guidance to perform their functions;
provide the persons and organisations concerned with the results of safety oversight activity;
be based on audits and inspections, including ramp and unannounced inspections; and
provide the competent authority with the evidence needed in case further action is required, including the measures foreseen by ARO.GEN.350 and ARO.GEN.355.
The scope of oversight defined in (a) and (b) shall take into account the results of past oversight activities and the safety priorities.
Without prejudice to the competences of the Member States and to their obligations as set out in ARO.RAMP, the scope of the oversight of activities performed in the territory of a Member State by persons or organisations established or residing in another Member State shall be determined on the basis of the safety priorities, as well as of past oversight activities.
Where the activity of a person or organisation involves more than one Member State or the Agency, the competent authority responsible for the oversight under (a) may agree to have oversight tasks performed by the competent authority(ies) of the Member State(s) where the activity takes place or by the Agency. Any person or organisation subject to such agreement shall be informed of its existence and of its scope.
The competent authority shall collect and process any information deemed useful for oversight, including for ramp and unannounced inspections.
With regard to the certification and oversight of the organisation’s compliance with point ORO.GEN.200A, in addition to complying with points (a) to (f) of this point, the competent authority shall review any approval granted under point IS.I.OR.200(e) of Annex II to Implementing Regulation (EU) 2023/203 following the applicable oversight audit cycle and whenever changes are implemented in the scope of work of the organisation.
The competent authority shall establish and maintain an oversight programme covering the oversight activities required by ARO.GEN.300 and by ARO.RAMP.
For organisations certified by the competent authority, the oversight programme shall be developed taking into account the specific nature of the organisation, the complexity of its activities, the results of past certification and/or oversight activities required by ARO.GEN and ARO.RAMP and shall be based on the assessment of associated risks. It shall include within each oversight planning cycle:
audits and inspections, including ramp and unannounced inspections as appropriate; and
meetings convened between the accountable manager and the competent authority to ensure both remain informed of significant issues.
For organisations certified by the competent authority an oversight planning cycle not exceeding 24 months shall be applied.
The oversight planning cycle may be reduced if there is evidence that the safety performance of the organisation has decreased.
The oversight planning cycle may be extended to a maximum of 36 months if the competent authority has established that, during the previous 24 months:
the organisation has demonstrated an effective identification of aviation safety hazards and management of associated risks;
the organisation has continuously demonstrated under ORO.GEN.130 that it has full control over all changes;
no level 1 findings have been issued; and
all corrective actions have been implemented within the time period accepted or extended by the competent authority as defined in ARO.GEN.350(d)(2).
The oversight planning cycle may be further extended to a maximum of 48 months if, in addition to the above, the organisation has established, and the competent authority has approved, an effective continuous reporting system to the competent authority on the safety performance and regulatory compliance of the organisation itself.
For organisations declaring their activity to the competent authority, the oversight programme shall be based on the specific nature of the organisation, the complexity of its activities and the data of past oversight activities and the assessment of risks associated with the type of activity carried out. It shall include audits and inspections, including ramp and unannounced inspections, as appropriate.
(d1) For organisations holding a specialised operations authorisation, the oversight programme shall be established in accordance with (d) and shall also take into account the past and current authorisation process and the validity period of the authorisation.
For persons holding a licence, certificate, rating, or attestation issued by the competent authority the oversight programme shall include inspections, including unannounced inspections, as appropriate.
The oversight programme shall include records of the dates when audits, inspections and meetings are due and when such audits, inspections and meetings have been carried out.
Upon receiving an application for the initial issue of a certificate for an organisation, the competent authority shall verify the organisation’s compliance with the applicable requirements. This verification may take into account the statement referred to in ORO.AOC.100(b).
When satisfied that the organisation is in compliance with the applicable requirements, the competent authority shall issue the certificate(s), as established in Appendices I and II. The certificate(s) shall be issued for an unlimited duration. The privileges and scope of the activities that the organisation is approved to conduct shall be specified in the terms of approval attached to the certificate(s).
To enable an organisation to implement changes without prior competent authority approval in accordance with ORO.GEN.130, the competent authority shall approve the procedure submitted by the organisation defining the scope of such changes and describing how such changes will be managed and notified.
Upon receiving an application for a change that requires prior approval, the competent authority shall verify the organisation’s compliance with the applicable requirements before issuing the approval.
The competent authority shall prescribe the conditions under which the organisation may operate during the change, unless the competent authority determines that the organisation’s certificate needs to be suspended.
When satisfied that the organisation is in compliance with the applicable requirements, the competent authority shall approve the change.
Without prejudice to any additional enforcement measures, when the organisation implements changes requiring prior approval without having received competent authority approval as defined in (a), the competent authority shall suspend, limit or revoke the organisation’s certificate.
For changes not requiring prior approval, the competent authority shall assess the information provided in the notification sent by the organisation in accordance with ORO.GEN.130 to verify compliance with the applicable requirements. In case of any non-compliance, the competent authority shall:
notify the organisation about the non-compliance and request further changes;