PART A
For wines originating in Australia
List of oenological practices and processes authorised for wines originating in Australia, under conditions laid down in Australian rules and in particular the Australian Wine and Brandy Corporation Act 1980, Trade Practices Act 1974, and the Australia New Zealand Food Standards Code (unless otherwise stated in this Annex), with the following prescriptions:
aeration or bubbling using argon, nitrogen or oxygen;
heat treatment;
use in dry wines, and in quantities not exceeding 5 %, of fresh lees which are sound and undiluted and contain yeasts resulting from the recent vinification of dry wine;
centrifuging and filtration, with or without an inert filtering agent, on condition that no undesirable residue is left in the products so treated;
use of yeasts for wine production;
use of carbon dioxide, argon or nitrogen, either alone or combined, solely in order to create an inert atmosphere and to handle the product shielded from the air;
addition of cultures of micro organisms including yeast ghosts with or without one or more of the following substances to encourage the growth of yeasts:
diammonium phosphate or ammonium sulphate,
ammonium sulphite or ammonium bisulphite,
thiamin hydrochloride;
diammonium phosphate or ammonium sulphate,
ammonium sulphite or ammonium bisulphite,
thiamin hydrochloride;
use of lactic acid bacteria in a vinous suspension;
addition of carbon dioxide, provided that the carbon dioxide content of wine so treated does not exceed 2 grams per litre;
use, under the conditions laid down in Community rules, of sulphur dioxide, potassium bisulphite or potassium metabisulphite, which may also be called potassium disulphite or potassium pyrosulphite;
addition of sorbic acid or potassium sorbate provided that the final sorbic acid content of the treated product on its release to the market for direct human consumption does not exceed 200 milligrams per litre;
addition of up to 300 milligrams per litre of L-ascorbic acid or erythorbic acid (iso-ascorbic acid);
addition of citric acid for wine stabilisation purposes, provided that the final content in the treated wine does not exceed 1 gram per litre;
use of tartaric acid, lactic acid or malic acid for acidification purposes, provided that the initial acidity content is not raised by more than 4,0 grams per litre expressed as tartaric acid;
clarification by means of one or more of the following substances for oenological use:
edible gelatine,
isinglass,
casein and potassium caseinate,
milk or evaporated milk,
animal albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymes approved for food usage;
edible gelatine,
isinglass,
casein and potassium caseinate,
milk or evaporated milk,
animal albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymes approved for food usage;
addition of tannin;
treatment with charcoal for oenological use (activated carbon);
treatment:
of white wines and rosé wines, with potassium ferrocyanide,
of red wines with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
of white wines and rosé wines, with potassium ferrocyanide,
of red wines with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
addition of up to 100 milligrams per litre of metatartaric acid;
use, for the manufacture of sparkling wine obtained by fermentation in bottle and with the lees separated by disgorging:
of calcium alginate, or
of potassium alginate;
of calcium alginate, or
of potassium alginate;
addition of potassium bitartrate to assist the precipitation of tartar;
use of preparations of yeast cell wall, up to a maximum of 40 grams per hectolitre;
use of polyvinylpolypyrrolidone, provided that the wine so treated does not contain more than 100 milligrams per litre polyvinylpolypyrrolidone;
use of copper sulphate to eliminate defects of taste or smell in the wine, up to a maximum of 1 gram per hectolitre, provided that the copper content of the wine so treated does not exceed 1 milligram per litre;
addition of caramel to reinforce the colour of liqueur wines;
addition of wine or dried grape distillate or of neutral alcohol of vinous origin for the manufacture of liqueur wines;
addition of grape must and concentrated grape must for sweetening of wine;
use for deacidification purposes of calcium carbonate;
use of cation exchange resins for wine stabilisation purposes provided that the resins are sufficiently stable not to transfer substances to the wine in quantities which could endanger human health (1);
use of pieces of oak;
use of spinning cone technology;
use of gum Arabic/Acacia;
use of calcium tartrate for deacidification purposes;
use of electro dialysis;
use of urease to reduce the urea content in the wine;
use of lysozyme;
use of reverse osmosis;
use of dimethyl dicarbonate;
use of hydrogen peroxide in grape juice, grape concentrate or grape must;
use of counter current extraction;
use of plant proteins;
use of copper citrate;
addition of grape spirit, brandy, and sugars to sparkling wine;
addition of mistelle.
aeration or bubbling using argon, nitrogen or oxygen;
heat treatment;
use in dry wines, and in quantities not exceeding 5 %, of fresh lees which are sound and undiluted and contain yeasts resulting from the recent vinification of dry wine;
centrifuging and filtration, with or without an inert filtering agent, on condition that no undesirable residue is left in the products so treated;
use of yeasts for wine production;
use of carbon dioxide, argon or nitrogen, either alone or combined, solely in order to create an inert atmosphere and to handle the product shielded from the air;
addition of cultures of micro organisms including yeast ghosts with or without one or more of the following substances to encourage the growth of yeasts:
diammonium phosphate or ammonium sulphate,
ammonium sulphite or ammonium bisulphite,
thiamin hydrochloride;
diammonium phosphate or ammonium sulphate,
ammonium sulphite or ammonium bisulphite,
thiamin hydrochloride;
use of lactic acid bacteria in a vinous suspension;
addition of carbon dioxide, provided that the carbon dioxide content of wine so treated does not exceed 2 grams per litre;
use, under the conditions laid down in Community rules, of sulphur dioxide, potassium bisulphite or potassium metabisulphite, which may also be called potassium disulphite or potassium pyrosulphite;
addition of sorbic acid or potassium sorbate provided that the final sorbic acid content of the treated product on its release to the market for direct human consumption does not exceed 200 milligrams per litre;
addition of up to 300 milligrams per litre of L-ascorbic acid or erythorbic acid (iso-ascorbic acid);
addition of citric acid for wine stabilisation purposes, provided that the final content in the treated wine does not exceed 1 gram per litre;
use of tartaric acid, lactic acid or malic acid for acidification purposes, provided that the initial acidity content is not raised by more than 4,0 grams per litre expressed as tartaric acid;
clarification by means of one or more of the following substances for oenological use:
edible gelatine,
isinglass,
casein and potassium caseinate,
milk or evaporated milk,
animal albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymes approved for food usage;
edible gelatine,
isinglass,
casein and potassium caseinate,
milk or evaporated milk,
animal albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymes approved for food usage;
addition of tannin;
treatment with charcoal for oenological use (activated carbon);
treatment:
of white wines and rosé wines, with potassium ferrocyanide,
of red wines with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
of white wines and rosé wines, with potassium ferrocyanide,
of red wines with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
addition of up to 100 milligrams per litre of metatartaric acid;
use, for the manufacture of sparkling wine obtained by fermentation in bottle and with the lees separated by disgorging:
of calcium alginate, or
of potassium alginate;
of calcium alginate, or
of potassium alginate;
addition of potassium bitartrate to assist the precipitation of tartar;
use of preparations of yeast cell wall, up to a maximum of 40 grams per hectolitre;
use of polyvinylpolypyrrolidone, provided that the wine so treated does not contain more than 100 milligrams per litre polyvinylpolypyrrolidone;
use of copper sulphate to eliminate defects of taste or smell in the wine, up to a maximum of 1 gram per hectolitre, provided that the copper content of the wine so treated does not exceed 1 milligram per litre;
addition of caramel to reinforce the colour of liqueur wines;
addition of wine or dried grape distillate or of neutral alcohol of vinous origin for the manufacture of liqueur wines;
addition of grape must and concentrated grape must for sweetening of wine;
use for deacidification purposes of calcium carbonate;
use of cation exchange resins for wine stabilisation purposes provided that the resins are sufficiently stable not to transfer substances to the wine in quantities which could endanger human health (1);
use of pieces of oak;
use of spinning cone technology;
use of gum Arabic/Acacia;
use of calcium tartrate for deacidification purposes;
use of electro dialysis;
use of urease to reduce the urea content in the wine;
use of lysozyme;
use of reverse osmosis;
use of dimethyl dicarbonate;
use of hydrogen peroxide in grape juice, grape concentrate or grape must;
use of counter current extraction;
use of plant proteins;
use of copper citrate;
addition of grape spirit, brandy, and sugars to sparkling wine;
addition of mistelle.
New or modified oenological practices and processes mutually decided by the Contracting Parties or the Joint Committee in accordance with the procedure set out in Articles 29 or 30.
PART B
For wines originating in the Community
List of oenological practices and processes authorised for wines originating in the Community, under conditions laid down in Community rules and in particular of Council Regulation (EC) No 1493/1999, and Commission Regulation (EC) No 1622/2000, (unless otherwise stated) with the following prescriptions:
aeration or bubbling using argon, nitrogen or oxygen;
heat treatment;
use in dry wines, and in quantities not exceeding 5 %, of fresh lees which are sound and undiluted and contain yeasts resulting from the recent vinification of dry wine;
centrifuging and filtration, with or without an inert filtering agent, on condition that no undesirable residue is left in the products so treated;
use of yeasts for wine production;
use of preparations of yeast cell wall, up to a maximum of 40 grams per hectolitre;
use of polyvinylpolypyrrolidone up to a maximum of 80 grams per hectolitre;
use of lactic acid bacteria in a vinous suspension;
addition of one or more of the following substances to encourage the growth of yeasts:
addition of:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
These products may also be used together up to a total of 0,3 grams per litre, without prejudice to the abovementioned limit of 0,2 grams per litre:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
addition of thiamin hydrochloride up to 0,6 milligrams per litre expressed as thiamin;
addition of:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
These products may also be used together up to a total of 0,3 grams per litre, without prejudice to the abovementioned limit of 0,2 grams per litre:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
addition of thiamin hydrochloride up to 0,6 milligrams per litre expressed as thiamin;
use of carbon dioxide, argon or nitrogen, either alone or combined, solely in order to create an inert atmosphere and to handle the product shielded from the air;
addition of carbon dioxide, provided that the carbon dioxide content of wine so treated does not exceed 2 grams per litre;
use, under the conditions laid down in Australian rules, of sulphur dioxide, potassium bisulphite or potassium metabisulphite, which may also be called potassium disulphite or potassium pyrosulphite;
addition of sorbic acid or potassium sorbate provided that the final sorbic acid content of the treated product on its release to the market for direct human consumption does not exceed 200 milligrams per litre;
addition of up to 250 milligrams per litre of L-ascorbic acid;
addition of citric acid for wine stabilisation purposes, provided that the final content in the treated wine does not exceed 1 gram per litre;
use of tartaric acid for acidification purposes, provided that the initial acidity content of the wine is not raised by more than 2,5 g/l expressed as tartaric acid;
use of one or more of the following substances for deacidification purposes:
neutral potassium tartrate,
potassium bicarbonate,
calcium carbonate, which may contain small quantities of the double calcium salt of L (+) tartaric and L (-) malic acids,
calcium tartrate or tartaric acid,
a homogenous preparation of tartaric acid and calcium carbonate in equivalent proportions and finely pulverised;
neutral potassium tartrate,
potassium bicarbonate,
calcium carbonate, which may contain small quantities of the double calcium salt of L (+) tartaric and L (-) malic acids,
calcium tartrate or tartaric acid,
a homogenous preparation of tartaric acid and calcium carbonate in equivalent proportions and finely pulverised;
clarification by means of one or more of the following substances for oenological use:
edible gelatine,
plant proteins,
isinglass,
casein and potassium caseinate,
egg albumin, milk albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymatic preparations of betaglucanase;
edible gelatine,
plant proteins,
isinglass,
casein and potassium caseinate,
egg albumin, milk albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymatic preparations of betaglucanase;
addition of tannin;
treatment with charcoal for oenological use (activated carbon) up to a maximum of 100 grams of dry product per hectolitre;
treatment:
of white wines and rosé wines, with potassium ferrocyanide,
of red wines, with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
of white wines and rosé wines, with potassium ferrocyanide,
of red wines, with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
addition of up to 100 milligrams per litre of metatartaric acid;
use of acacia after completion of fermentation;
use of DL-tartaric acid, also called racemic acid, or of its neutral salt of potassium for precipitating excess calcium;
use for the manufacture of sparkling wines obtained by fermentation in bottle and with the lees separated by disgorging:
of calcium alginate, or
of potassium alginate;
of calcium alginate, or
of potassium alginate;
use of copper sulphate to eliminate defects of taste or smell in the wine, up to a maximum of 1 gram per hectolitre, provided that the copper content of the wine so treated does not exceed 1 milligram per litre;
addition of potassium bitartrate or calcium tartrate to assist the precipitation of tartar;
use of Aleppo pine resin only for the purpose of obtaining a ‘retsina’ wine which may be produced only in Greece;
addition of caramel to reinforce the colour of liqueur wines;
use of calcium sulphate for the production of certain liqueur wines psr, provided that the sulphate content of the wine so treated does not exceed 2,5 grams per litre expressed as potassium sulphate;
addition of wine or dried grape distillate or of neutral alcohol of vinous origin for the production of liqueur wines;
addition of sucrose, concentrated grape must or rectified concentrated grape must to increase the natural alcoholic strength of grapes, grape must or wine;
addition of grape must or rectified concentrated grape must for sweetening of wine;
electro dialysis to guarantee tartaric stabilisation of the wine;
use of urease to reduce the urea content in the wine;
addition of lysozyme;
partial concentration by physical process, including reverse osmosis, to increase the natural alcoholic strength of grape must or wine;
addition of dimethyldicarbonate (DMDC) to wine for microbiological stabilisation;
use of pieces of oak wood in winemaking.
aeration or bubbling using argon, nitrogen or oxygen;
heat treatment;
use in dry wines, and in quantities not exceeding 5 %, of fresh lees which are sound and undiluted and contain yeasts resulting from the recent vinification of dry wine;
centrifuging and filtration, with or without an inert filtering agent, on condition that no undesirable residue is left in the products so treated;
use of yeasts for wine production;
use of preparations of yeast cell wall, up to a maximum of 40 grams per hectolitre;
use of polyvinylpolypyrrolidone up to a maximum of 80 grams per hectolitre;
use of lactic acid bacteria in a vinous suspension;
addition of one or more of the following substances to encourage the growth of yeasts:
addition of:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
These products may also be used together up to a total of 0,3 grams per litre, without prejudice to the abovementioned limit of 0,2 grams per litre:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
addition of thiamin hydrochloride up to 0,6 milligrams per litre expressed as thiamin;
addition of:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
These products may also be used together up to a total of 0,3 grams per litre, without prejudice to the abovementioned limit of 0,2 grams per litre:
diammonium phosphate or ammonium sulphate up to 0,3 grams per litre,
ammonium sulphite or ammonium bisulphite up to 0,2 grams per litre.
addition of thiamin hydrochloride up to 0,6 milligrams per litre expressed as thiamin;
use of carbon dioxide, argon or nitrogen, either alone or combined, solely in order to create an inert atmosphere and to handle the product shielded from the air;
addition of carbon dioxide, provided that the carbon dioxide content of wine so treated does not exceed 2 grams per litre;
use, under the conditions laid down in Australian rules, of sulphur dioxide, potassium bisulphite or potassium metabisulphite, which may also be called potassium disulphite or potassium pyrosulphite;
addition of sorbic acid or potassium sorbate provided that the final sorbic acid content of the treated product on its release to the market for direct human consumption does not exceed 200 milligrams per litre;
addition of up to 250 milligrams per litre of L-ascorbic acid;
addition of citric acid for wine stabilisation purposes, provided that the final content in the treated wine does not exceed 1 gram per litre;
use of tartaric acid for acidification purposes, provided that the initial acidity content of the wine is not raised by more than 2,5 g/l expressed as tartaric acid;
use of one or more of the following substances for deacidification purposes:
neutral potassium tartrate,
potassium bicarbonate,
calcium carbonate, which may contain small quantities of the double calcium salt of L (+) tartaric and L (-) malic acids,
calcium tartrate or tartaric acid,
a homogenous preparation of tartaric acid and calcium carbonate in equivalent proportions and finely pulverised;
neutral potassium tartrate,
potassium bicarbonate,
calcium carbonate, which may contain small quantities of the double calcium salt of L (+) tartaric and L (-) malic acids,
calcium tartrate or tartaric acid,
a homogenous preparation of tartaric acid and calcium carbonate in equivalent proportions and finely pulverised;
clarification by means of one or more of the following substances for oenological use:
edible gelatine,
plant proteins,
isinglass,
casein and potassium caseinate,
egg albumin, milk albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymatic preparations of betaglucanase;
edible gelatine,
plant proteins,
isinglass,
casein and potassium caseinate,
egg albumin, milk albumin,
bentonite,
silicon dioxide as a gel or colloidal solution,
kaolin,
tannin,
pectolytic enzymes,
enzymatic preparations of betaglucanase;
addition of tannin;
treatment with charcoal for oenological use (activated carbon) up to a maximum of 100 grams of dry product per hectolitre;
treatment:
of white wines and rosé wines, with potassium ferrocyanide,
of red wines, with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
of white wines and rosé wines, with potassium ferrocyanide,
of red wines, with potassium ferrocyanide or with calcium phytate, provided that the wine so treated contains residual iron;
addition of up to 100 milligrams per litre of metatartaric acid;
use of acacia after completion of fermentation;