22 PROTOCOL No 6: ANNEX III movement certificate EUR.1 and application for a movement certificate EUR.1, Decision_act (EU) 2005/690

In force

Printing instructions

1.

Each form shall measure 210 x 297 mm; a tolerance of up to minus 5 mm or plus 8 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 25 g/m2. It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.

2.

The competent authorities of the Member States of the Community and of Algeria may reserve the right to print the forms themselves or may have them printed by approved printers. In the latter case, each form must include a reference to such approval. Each form must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or not, by which it can be identified.

Text of image

MOVEMENT CERTIFICATE

EUR.1 No A 000.000

See notes overleaf before completing this form

1.

Exporter (Name, full address, country)

2.

Certificate used in preferential trade between

…

and

…

(Insert appropriate countries, groups of countries or territories)

3.

Consignee (Name, full address, country) (Optional)

4.

Country, group of countries or territory in which the products are considered as originating

5.

Country, group of countries or territory of destination

6.

Transport details (Optional)

7.

Remarks

8.

Item number; Mark and number; Number and kind of packages (1); Description of goods

9.

Gross mass (kg) or other measure (litres, m3, etc.)

10.

Invoice (Optional)

11.

CUSTOMS ENDORSEMENT

Declaration certified

Export document (2)

Form … no …

of …

Customs office: …

Issuing country: …

…

Place …, date …

…

(Signature)

Stamp

12.

DECLARATION BY THE EXPORTER

I, the undersigned, declare that the goods described above meet the conditions required for the issue of this certificate.

Place …, date …

…

(Signature)

(1)

If goods are note packed, indicate number of articles or state ‘in bulk’ as appropriate.

(2)

Complete only where the regulations of the exporting country or territority require.

Text of image

13.

Request for verification, to:

14.

RESULT OF VERIFICATION

Verification carried out shows that this certificate (1)

was issued by the Customs Office indicated and that the information contained therein is accurate

does not meet the requirements as to authenticity and accuracy (see remarks appended).

Verification of the authenticity and accuracy of this certificate is requested.

Place …, date …

…

(Signature)

Stamp

Place …, date …

…

(Signature)

Stamp

(1)

Insert X in the appropriate box.

NOTES

1.

Certificate must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialled by the person who completed the certificate and endorsed by the Customs authorities of the issuing country or territory.

2.

No spaces must be left between the items entered on the certificate and each item must be precede by an item number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later additions impossible.

3.

Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified.

Text of image

APPLICATION FOR A MOVEMENT CERTIFICATE EUR.1

EUR.1 No A 000.000

See notes overleaf before completing this form

1.

Exporter (Name, full address, country)

2.

Application for certificate used in preferential trade between

…

and

…

(Insert appropriate countries or groups of countries or territories)

3.

Consignee (Name, full address, country) (Optional)

4.

Country, group of countries or territory in which the products are considered as originating

5.

Country, group of countries or territory of destination

6.

Transport details (Optional)

7.

Remarks

8.

Item number; Mark and number; Number and kind of packages (1) Description of goods

9.

Gross mass (kg) or other measure (litres, m3, etc.)

10.

Invoice (Optional)

(1)

If goods are not packed, indicate number of articles or state ‘in bulk’ as appropriate.

Text of image

DECLARATION BY THE EXPORTER

I, the undersigned, exporter of the goods described overleaf,

DECLARE that the goods meet the conditions required for the issue of the attached certificate;

SPECIFY as follows the circumstances which have enable these goods to meet the above conditions:

…

SUBMIT the following supporting documents (1):

…

UNDERTAKE to submit, at the request of the appropriate authorities, any supporting evidence which these authorities may require for the purpose of issuing the attached certificate, and undertake, if required, to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods, carried out by the said authorities;

REQUEST the issue of the attached certificate for these goods.

Place…, date…

…

(Signature)

(1)

For example: import documents, movement certificates, invoices, manufacturer’s declarations, etc., referring to the products used in manufacture or to the goods re-exported in the same state.