18 ANNEXES — Annex I | Introductory notes to the list in Annex II, Decision_act (EU) 2005/690

In force
–

Annex II | List of working or processing required to be carried out on non-originating materials in order that the product manufactured can obtain originating status

–

Annex III | Movement certificate EUR.1 and application for a movement certificate EUR.1

–

Annex IV | Invoice declaration

–

Annex V | Specimen of declaration by the supplier

–

Annex VI | Information certificate

–

Annex VII | Joint Declarations

TITLE I

GENERAL PROVISIONS

Article 1

Definitions

For the purposes of this Protocol:

(a)

‘manufacture’ means any kind of working or processing including assembly or specific operations;

(b)

‘material’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product;

(c)

‘product’ means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(d)

‘goods’ means both materials and products;

(e)

‘customs value’ means the value as determined in accordance with the 1994 Agreement on implementation of Article VII of the General Agreement on Tariffs and Trade (WTO Agreement on customs valuation);

(f)

‘ex-works price’ means the price paid for the product ex works to the manufacturer in the Community or in Algeria in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;

(g)

‘value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the Community or in Algeria;

(h)

‘value of originating materials’ means the value of such materials as defined in (g) applied mutatis mutandis;

(i)

‘added value’ means the ex-works price minus the customs value of each of the products incorporated which did not originate in the country in which those products were obtained;

(j)

‘chapters’ and ‘headings’ mean the chapters and the headings (four-digit codes) used in the nomenclature which makes up the Harmonised Commodity Description and Coding System, referred to in this Protocol as ‘the Harmonised System’ or ‘HS’;

(k)

‘classified’ refers to the classification of a product or material under a particular heading;

(l)

‘consignment’ means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(m)

‘territories’ includes territorial waters.

TITLE II

DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’

Article 2

General provisions

1.

For the purpose of implementing this Agreement, the following products shall be considered as originating in the Community:

(a)

products wholly obtained in the Community within the meaning of Article 6;

(b)

products obtained in the Community incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the Community within the meaning of Article 7.

2.

For the purpose of implementing this Agreement, the following products shall be considered as originating in Algeria:

(a)

products wholly obtained in Algeria within the meaning of Article 6;

(b)

products obtained in Algeria incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Algeria within the meaning of Article 7.

Article 3

Bilateral cumulation of origin

1.

Materials originating in the Community shall be considered as materials originating in Algeria when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 8(1).

2.

Materials originating in Algeria shall be considered as materials originating in the Community when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond that referred to in Article 8(1).

Article 4

Cumulation with materials originating in Morocco or Tunisia

1.

Notwithstanding Article 2(1)(b) and subject to the provisions of paragraphs 3 and 4, materials originating in Morocco or Tunisia within the meaning of Protocol No 4 annexed to the Agreements between the Community and these countries shall be considered as originating in the Community and it shall not be necessary that such materials have undergone sufficient working or processing, on condition however that they have undergone working or processing beyond that referred to in Article 8(1).

2.

Notwithstanding Article 2(2)(b) and subject to the provisions of paragraphs 3 and 4, materials originating in Morocco or Tunisia within the meaning of Protocol No 4 annexed to the Agreements between the Community and these countries shall be considered as originating in Algeria and it shall not be necessary that such materials have undergone sufficient working or processing, on condition however that they have undergone working or processing beyond that referred to in Article 8(1).

3.

The provisions set out in paragraphs 1 and 2 concerning materials originating in Tunisia are only applicable to the extent that trade between the Community and Tunisia and between Algeria and Tunisia, is governed by identical rules of origin.

4.

The provisions set out in paragraphs 1 and 2 concerning materials originating in Morocco are only applicable to the extent that trade between the Community and Morocco and between Algeria and Morocco, is governed by identical rules of origin.

Article 5

Cumulation of working or processing

1.

For the purpose of implementing Article 2(1)(b), working or processing carried out in Algeria, or, when the conditions required by Article 4(3) and (4) are fulfilled, in Morocco or in Tunisia shall be considered as having been carried out in the Community when the products obtained undergo subsequent working or processing in the Community.

2.

For the purpose, of implementing Article 2(2)(b), working or processing carried out in the Community or, when the conditions required by Article 4(3) and (4) are fulfilled, in Morocco or in Tunisia shall be considered as having been carried out in Algeria when the products obtained undergo subsequent working or processing in Algeria.

3.

Where pursuant to the provisions of paragraph 1 or 2 the originating products are obtained in two or more of the States referred to in those provisions or in the Community, they shall be considered as originating products of the State or the Community according to where the last working or processing took place, provided that that working or processing went beyond that referred to in Article 8.

Article 6

Wholly obtained products

1.

The following shall be considered as wholly obtained in the Community or Algeria:

(a)

mineral products extracted from their soil or from their seabed;

(b)

vegetable products harvested there;

(c)

live animals born and raised there;

(d)

products from live animals raised there;

(e)

products obtained by hunting or fishing conducted there;

(f)

products of sea fishing and other products taken from the sea outside the territorial waters of the Community or Algeria by their vessels;

(g)

products made aboard their factory ships exclusively from products referred to in subparagraph (f);

(h)

used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or use as waste;

(i)

waste and scrap resulting from manufacturing operations conducted there;

(j)

products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(k)

goods produced exclusively from products specified in subparagraphs (a) to (j).

2.

The terms ‘their vessels’ and ‘their factory ships’ in paragraph 1(f) and (g) shall apply only to vessels and factory ships:

(a)

which are registered or recorded in a Community Member State or in Algeria;

(b)

which sail under the flag of a Community Member State or of Algeria;

(c)

which are owned to an extent of at least 50 % by nationals of a Community Member State or of Algeria, or by a company with its head office in one of these States, of which the manager or managers, Chairman of the Board of Directors or the Supervisory Board, and the majority of the members of such boards are nationals of a Community Member State or of Algeria and of which, in addition, in the case of partnerships or limited companies, at least half the capital belongs to those States or to public bodies or nationals of the said States;

(d)

of which the master and officers are nationals of Community Member States or of Algeria;

and

(e)

of which at least 75 % of the crew are nationals of Community Member States or of Algeria.

Article 7

Sufficiently worked or processed products

1.

For the purposes of Article 2, products which are not wholly obtained are considered to be sufficiently worked or processed when the conditions set out in the list in Annex II are fulfilled.

The conditions referred to above indicate, for all products covered by the Agreement, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials. It follows that if a product which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.

2.

Notwithstanding paragraph 1, non-originating materials which, according to the conditions set out in the list, should not be used in the manufacture of a product may nevertheless be used, provided that:

(a)

their total value does not exceed 10 % of the ex-works price of the product;

(b)

any of the percentages given in the list for the maximum value of non-originating materials are not exceeded through the application of this paragraph.

This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.

3.

Paragraphs 1 and 2 shall apply except as provided in Article 8.

Article 8

Insufficient working or processing operations

1.

Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 7 are satisfied:

(a)

operations to ensure the preservation of products in good condition during transport and storage (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions, removal of damaged parts, and like operations);

(b)

simple operations consisting of removal of dust, sifting or screening, sorting, classifying, matching (including the making-up of sets of articles), washing, painting, cutting up;

(c)

(i) changes of packaging and division and assembly of packages;

(ii)

simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards, etc., and all other simple packaging operations;

(i)

changes of packaging and division and assembly of packages;

(ii)

simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards, etc., and all other simple packaging operations;

(d)

affixing marks, labels and other like distinguishing signs on products or their packaging;

(e)

simple mixing of products, whether or not of different kinds, where one or more components of the mixtures do not meet the conditions laid down in this Protocol to enable them to be considered as originating in the Community or Algeria;

(f)

simple assembly of parts to constitute a complete product;

(g)

a combination of two or more operations specified in subparagraphs (a) to (f);

(h)

slaughter of animals.

2.

All the operations carried out in either the Community or Algeria on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.

Article 9

Unit of qualification

1.

The unit of qualification for the application of the provisions of this Protocol shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.

It follows that:

(a)

when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification;

(b)

when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product must be taken individually when applying the provisions of this Protocol.

2.

Where, under General Rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.

Article 10

Accessories, spare parts and tools

Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

Article 11

Sets

Sets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.

Article 12

Neutral elements

In order to determine whether a product originates, it shall not be necessary to determine the origin of the following which might be used in its manufacture:

(a)

energy and fuel;

(b)

plant and equipment;

(c)

machines and tools;

(d)

goods which do not enter and which are not intended to enter into the final composition of the product.

TITLE III

TERRITORIAL REQUIREMENTS

Article 13

Principle of territoriality

1.

The conditions set out in Title II relative to the acquisition of originating status must be fulfilled without interruption in the Community or in Algeria without prejudice to the provisions of Articles 4 and 5.

2.

Except as provided for in Articles 4 and 5, where originating goods exported from the Community or from Algeria to another country return, they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

(a)

the returning goods are the same as those exported;

and

(b)

they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

Article 14

Direct transport

1.

The preferential treatment provided for under the Agreement applies only to products, satisfying the requirements of this Protocol, which are transported directly between the Community and Algeria or through the territories of the other countries referred to in Articles 4 and 5. However, products constituting one single consignment may be transported through other territories with, should the occasion arise, transhipment or temporary warehousing in such territories, provided that they remain under the surveillance of the customs authorities in the country of transit or warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition.

Originating products may be transported by pipeline across territory other than that of the Community or Algeria.

2.

Evidence that the conditions set out in paragraph 1 have been fulfilled shall be supplied to the customs authorities of the importing country by the production of:

(a)

a single transport document covering the passage from the exporting country through the country of transit; or

(b)

a certificate issued by the customs authorities of the country of transit:

(i)

giving an exact description of the products;

(ii)

stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used;

and

(iii)

certifying the conditions under which the products remained in the transit country; or

(i)

giving an exact description of the products;

(ii)

stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used;

and

(iii)

certifying the conditions under which the products remained in the transit country; or

(c)

failing these, any substantiating documents.

Article 15

Exhibitions

1.

Originating products, sent for exhibition in a country other than those referred to in Articles 5 and 4 and sold after the exhibition for importation in the Community or in Algeria, shall benefit on importation from the provisions of the Agreement provided it is shown to the satisfaction of the customs authorities that:

(a)

an exporter has consigned these products from the Community or from Algeria to the country in which the exhibition is held and has exhibited them there;

(b)

the products have been sold or otherwise disposed of by that exporter to a person in the Community or in Algeria;

(c)

the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition;

and

(d)

the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

2.

A proof of origin must be issued or made out in accordance with the provisions of Title V and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required.

3.

Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.

TITLE IV

DRAWBACK OR EXEMPTION

Article 16

Prohibition of drawback of or exemption from customs duties

1.

Non-originating materials used in the manufacture of products originating in the Community, in Algeria or in one of the other countries referred to in Articles 4 and 5 for which a proof of origin is issued or made out in accordance with the provisions of Title V shall not be subject in the Community or in Algeria to drawback of, or exemption from, customs duties of whatever kind.

2.

The prohibition in paragraph 1 shall apply to any arrangement for refund, remission or non-payment, partial or complete, of customs duties or charges having an equivalent effect, applicable in the Community or in Algeria to materials used in the manufacture, where such refund, remission or non-payment applies, expressly or in effect, when products obtained from the said materials are exported and not when they are retained for home use there.

3.

The exporter of products covered by a proof of origin shall be prepared to submit at any time, upon request from the customs authorities, all appropriate documents proving that no drawback has been obtained in respect of the non-originating materials used in the manufacture of the products concerned and that all customs duties or charges having equivalent effect applicable to such materials have actually been paid.

4.

The provisions of paragraphs 1 to 3 shall also apply in respect of packaging within the meaning of Article 9(2), accessories, spare parts and tools within the meaning of Article 10 and products in a set within the meaning of Article 11 when such items are non-originating.

5.

The provisions of paragraphs 1 to 4 shall apply only in respect of materials which are of the kind to which the Agreement applies. Furthermore, they shall not preclude the application of an export refund system for agricultural products, applicable upon export in accordance with the provisions of the Agreement.

6.

The provisions of this Article shall not apply for six years following the entry into force of the Agreement.

7.

After the entry into force of the provisions of this Article and notwithstanding paragraph 1, Algeria may apply arrangements for drawback of, or exemption from, customs duties or charges having an equivalent effect, applicable to materials used in the manufacture of originating products, subject to the following provisions:

(a)

a 5 % rate of customs charge shall be retained in respect of products falling within Chapters 25 to 49 and 64 to 97 of the Harmonised System, or such lower rate as is in force in Algeria;

(b)

a 10 % rate of customs charge shall be retained in respect of products falling within Chapters 50 to 63 of the Harmonised System, or such lower rate as is in force in Algeria.

The provisions of this paragraph shall be reviewed before the end of the transitional period referred to in Article 6 of the Agreement.

TITLE V

PROOF OF ORIGIN

Article 17

General provisions

1.

Products originating in the Community shall, on importation into Algeria, and products originating in Algeria shall, on importation into the Community, benefit from the Agreement upon submission of either:

(a)

a movement certificate EUR.1, a specimen of which appears in Annex III; or

(b)

in the cases specified in Article 22(1), a declaration, subsequently referred to as the ‘invoice declaration’, given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified. The text of the invoice declaration appears in Annex IV.

2.

Notwithstanding paragraph 1, originating products within the meaning of this Protocol shall, in the cases specified in Article 27, benefit from the Agreement without it being necessary to submit any of the documents referred to above.

Article 18

Procedure for the issue of an EUR.1 movement certificate

1.

A movement certificate EUR.1 shall be issued by the customs authorities of the exporting country on application having been made in writing by the exporter or, under the exporter's responsibility, by his authorised representative.

This article is long: the rest is at the official publication.