The Commission notes, however, that in the case of Diano, which in 1993 had produced 16 807 tonnes of hot-rolled products - equivalent to 21 % of its capacity - the firm carried out major maintenance work in the rolling mill, which had repeatedly involved halting production. In practice, output at Diano, taking account of annual production and the maintenance work described, should have been roughly the same as the figure for 1991, when the firm produced 24 765 tonnes, corresponding to 31 % of capacity. In view of this and, in particular, the capacity utilization rate the firm would have been able to achieve had it not been for the abovementioned major overhaul of its mill, the Commission has reason to believe that the firm in question was in regular production (on average one shift per day, five days per week), at the time of its closure.
IV
In the light of the above, in particular Part III of this Decision, it must be concluded that, with the exception of Case ex N 177/96 (Diano), the requirements applicable pursuant to Article 4 of the Steel Aid Code have not been satisfied and that the comments put forward by the Italian authorities are not such as to alter the initial assessment the Commission made when it decided to initiate the procedure provided for in Article 6 (4) of the Steel Aid Code.
It should therefore be concluded that the aid Italy plans to grant to:
Lamifer SpA,
Demafer Srl,
Lavorazione Metalli Vari (LMV) SpA,
Sidercamuna SpA,
are to be regarded as incompatible with the common market, in that they do not, pursuant to the Steel Aid Code, qualify for exemption from the general prohibition provided for in Article 4 (c) of the ECSC Treaty.
However, the plan to grant aid totalling Lit 5 953 million to Diano SpA is compatible with the common market since it satisfies the requirements of Article 4 of the Steel Aid Code,
HAS ADOPTED THIS DECISION: