The new hot-wide-strip mill that is to be purchased by the new company shall be of a production capacity as close as possible to the maximum capacity of 900 000 t/y hot-wide-strip.
Germany shall demonstrate to the Commission, before the new mill is acquired, that the new company has fulfilled the aforementioned condition after due consideration is given to the availability on the market of such installations, second has as well as new.
If the mill agreed by the Commission were to have a technological capacity exceeding 900 000 t/y, a technological bottleneck shall be imposed on the new hot-wide-strip mill to limit its capacity to 900 000 t/y.
The production at the new hot-wide-strip mill is to be built up to reach its capacity of 900 kt/y only after three years, starting in 1994.
The capacity limitation will be retained throughout a period of five years following the date of the last closure, or the last payment of aid to investment under the present plan, whichever is the later.
Upon the expiry of the aforementioned five-year period another five-year period will start to run, during which the production capacity for hot-wide strip at EKO Stahl shall be limited significantly below two million t/y.
During the first five-year period of capacity limitation Germany shall ensure that the hot-rolled steel capacity to be established at EKO Stahl will be utilized by the present and future owners exclusively for further processing in EKO Stahl's cold-rolling facilities.
Germany shall ensure that the aid approved under this Decision is not used to increase the present steel production capacity of EKO Stahl beyond the planned installation of a hot-wide-strip mill bottlenecked at 900 kt/y. There shall be no increase in capacity remaining under the aided restructuring plan, other than resulting from productivity improvements, for a period of five years starting from the date of the last closure, or the last payment of aid to investment under the present concept, whichever is the later.