6 ATTACHMENT F, Decision No 1/2017 of the Committee established under the Agreement between the European…

In forcesince 28 Jul 2017

In Annex 1, Product Sectors, Chapter 11, Measuring instruments and prepackages should be deleted and replaced by the following one:

Provisions covered by Article 1(1)

European Union |

1.

Council Directive 71/347/EEC of 12 October 1971 on the approximation of the laws of the Member States relating to the measuring of the standard mass per storage volume of grain (OJ L 239, 25.10.1971, p. 1), as subsequently amended

2.

Council Directive 76/765/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to alcoholmeters and alcohol hydrometers (OJ L 262, 27.9.1976, p. 143), as subsequently amended

3.

Council Directive 86/217/EEC of 26 May 1986 on the approximation of the laws of the Member States relating to tyre pressure gauges for motor vehicles (OJ L 152, 6.6.1986, p. 48), as subsequently amended

4.

Council Directive 75/107/EEC of 19 December 1974 on the approximation of the laws of the Member States relating to bottles used as measuring containers (OJ L 42, 15.2.1975, p. 14), as subsequently amended

5.

Council Directive 76/211/EEC of 20 January 1976 on the approximation of the laws of the Member States relating to the making up by weight or by volume of certain prepackaged products (OJ L 46, 21.2.1976, p. 1), as subsequently amended

6.

Directive 2007/45/EC of the European Parliament and of the Council of 5 September 2007 laying down rules on nominal quantities for prepacked products, repealing Council Directives 75/106/EEC and 80/232/EEC, and amending Council Directive 76/211/EEC (OJ L 247, 21.9.2007, p. 17) applicable as from 11 April 2009

Switzerland |

100.

Ordinance of 5 September 2012 on the declaration of quantities for unpackaged and prepackaged products (RS 941.204), as subsequently amended

101.

Ordinance of the Federal Ministry of Justice and Police of 10 September 2012 on the declaration of quantities for unpackaged and prepackaged products (RS 941.204.1), as subsequently amended

Provisions covered by Article 1(2)

European Union |

1.

Directive 2009/34/EC of the European Parliament and of the Council of 23 April 2009 relating to common provisions for both measuring instruments and methods of metrological control (Recast) (OJ L 106, 28.4.2009, p. 7)

2.

Council Directive 71/317/EEC of 26 July 1971 on the approximation of the laws of the Member States relating to 5 to 50 kilogramme medium accuracy rectangular bar weights and 1 to 10 kilogramme medium accuracy cylindrical weights (OJ L 202, 6.9.1971, p. 14)

3.

Council Directive 74/148/EEC of 4 March 1974 on the approximation of the laws of the Member States relating to weights of from 1 mg to 50 kg of above-medium accuracy (OJ L 84, 28.3.1974, p. 3)

4.

Council Directive 80/181/EEC of 20 December 1979 on the approximation of the laws of the Member States relating to units of measurement and on the repeal of Directive 71/354/EEC (OJ L 39, 15.2.1980, p. 40) as last amended by Directive 2009/3/EC of the European Parliament and of the Council of 11 March 2009 (OJ L 114, 7.5.2009, p. 10)

5.

Council Directive 76/766/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to alcohol tables (OJ L 262, 27.9.1976, p. 149)

6.

Directive 2014/31/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of non-automatic weighing instruments (OJ L 96, 29.3.2014, p. 107)

7.

Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments (OJ L 96, 29.3.2014, p. 149)

8.

Directive 2011/17/EU of the European Parliament and of the Council of 9 March 2011 repealing Council Directives 71/317/EEC, 71/347/EEC, 71/349/EEC, 74/148/EEC, 75/33/EEC, 76/765/EEC, 76/766/EEC and 86/217/EEC regarding metrology (OJ L 71, 18.3.2011, p. 1)

Switzerland |

102.

Federal Law of 17 June 2011 on metrology (RO 2012 6235)

103.

Ordinance of 23 November 1994 on units measurement (RO 1994 3109), as last amended on 7 December 2012 (RO 2012 7193)

104.

Ordinance of 15 February 2006 concerning measuring instruments (RO 2006 1453), as last amended on 25 November 2015 (RO 2015 5835)

105.

Ordinance of the Federal Ministry of Justice and Police of 16 April 2004 on non-automatic weighing instruments (RO 2004 2093), as last amended on 25 November 2015 (RO 2015 5849)

106.

Ordinance of the Federal Ministry of Justice and Police of 19 March 2006 on measuring instruments of length (RO 2006 1433), as last amended on 7 December 2012(RO 2012 7183)

107.

Ordinance of the Federal Ministry of Justice and Police of 19 March 2006 on measure of volume (RO 2006 1525), as last amended on 7 December 2012 (RO 2012 7183)

108.

Ordinance of the Federal Ministry of Justice and Police of 19 March 2006 on measuring systems for liquids other than water (RO 2006 1533) as last amended on 7 December 2012 (RO 2012 7183)

109.

Ordinance of the federal Ministry of Justice and Police of 19 March 2006 on automatic weighing instruments (RO 2006 1545), as last amended on 7 December 2012(RO 2012 7183)

110.

Ordinance of the Federal Ministry of Justice and Police of 19 March 2006 on instruments for thermal energy (RO 2006 1569), as last amended on 7 December 2012(RO 2012 7183)

111.

Ordinance of the Federal Ministry of Justice and Police of 19 March 2006 on measuring instruments for gas quantities (RO 2006 1591), as last amended on 7 December 2012 (RO 2012 7183)

112.

Ordinance of the Federal Ministry of Justice and Police of 19 March 2006 on measuring instruments for exhaust gases of combustion engines (RO 2006 1599), as last amended on 19 November 2014 (RO 2014 4551)

113.

Ordinance of the Federal Ministry of Justice and Police of 19 March 2006 on measuring instruments for the electrical energy and power (RO 2006 1613), as last amended on 7 December 2012 (RO 2012 7183)

114.

Ordinance of the Federal Ministry of Justice and Police of 15 August 1986 on weights (RO 1986 2022), as last amended on 7 December 2012 (RO 2012 7183)

115.

Ordinance of the Federal Ministry of Justice and Police of 5 November 2013 on taximeters (RO 2013 4333), as last amended on 19 November 2014 (RO 2014 4547)

116.

Ordinance of 17 June 1996 on the Swiss accreditation system and on the designation of test laboratories and conformity assessment bodies (RO 1996 1904), as last amended on 25 November 2015 (RO 2016 261)

The Committee established under Article 10 of this Agreement shall draw up and keep up to date, according to the procedure described in Article 11 of the Agreement, a list of the conformity assessment bodies.

The Committee established under Article 10 of this Agreement shall draw up and keep up to date a list of the designating authorities notified by the Parties.

For the designation of conformity assessment bodies, designating authorities shall comply with the general principles contained in Annex 2 to this Agreement and the assessment criteria set out in Chapter 4 of Directive 2014/31/EU and Chapter 4 of Directive 2014/32/EU, as regards the products covered by those Directives.

Switzerland shall recognise checks carried out in accordance with the provisions of Union legislation listed in Section I by a Union body recognised under this Agreement in the case of Union prepackages placed on the market in Switzerland.

As regards statistical checking of the quantities declared on prepackages, the European Union shall recognise the Swiss method laid down in Annex 3 Point 7 of the Ordinance of 5 September 2012 on the declaration of quantities for unpackaged and prepackaged products (RS 941.204) as equivalent to the European Union method laid down in Annex II of Directives 75/106/EEC and 76/211/EEC, as amended by Directive 78/891/EEC. Swiss producers whose prepackages conform to Union legislation and have been checked according to the Swiss method shall affix the “e” mark on their products exported to the EU.

2.1.

For the purposes of this Agreement, the provisions of Council Directive 2009/34/EC of 23 April 2009 shall be read with the following adaptations:

(a)

To the first indent of point 3.1.of Annex 1 and to the first indent of point 3.1.1.1 (a) of Annex II, the following shall be added to the text in brackets: “CH for Switzerland”.

(b)

The drawings to which point 3.2.1 of Annex II refers, are supplemented by the following drawing:

2.2.

By the way of derogation from Article 1 of this Agreement, the rules on marking for measuring instruments placed on the Swiss market are as follows:

The marking that must be affixed is the EC marking and supplementary metrology marking or the national sign of the EC Member State concerned as provided in the first indent of point 3.1 of Annex I and the first indent of point 3.1.1.1 of Annex II to Directive 2009/34/EC of 23 April 2009.

Pursuant to the legislation under Section I, economic operators established in the EU or Switzerland are subject to equivalent obligations.

In order to avoid unnecessary duplication of obligations:

(a)

for the purpose of the obligations in Articles 6(6) and 8(3) of Directive 2014/31/EU, respectively Articles 8(6) and 10(3) of Directive 2014/32/EU and the corresponding Swiss provisions, it shall be sufficient to indicate the name, registered trade name or registered trade mark and the postal address at which the manufacturer established within the territory of either the European Union or Switzerland can be contacted. In case the manufacturer in not established within the territory of either the European Union or Switzerland, it shall be sufficient to indicate the name, registered trade name or registered trade mark and the postal address at which the importer established within the territory of either the European Union or Switzerland can be contacted;

(b)

for the purpose of the obligations in Articles 6(3) and 8(8) of Directive 2014/31/EU, respectively Articles 8(3) and 10(8) of Directive 2014/32/EU and the corresponding Swiss provisions, it shall be sufficient that the manufacturer established within the territory of either the European Union or Switzerland keep the technical documentation and the EU declaration of conformity or, where applicable, the attestation of conformity for 10 years after the instrument has been placed on the market in either the European Union or Switzerland. In case the manufacturer is not established within the territory of either the European Union or Switzerland, it shall be sufficient that the importer established within the territory of either the European Union or Switzerland keep a copy of the EU declaration of conformity or, where applicable, the attestation of conformity at the disposal of the market surveillance authorities and ensure that the technical documentation can be made available to those authorities upon request for 10 years after the instrument has been placed on the market in either the European Union or Switzerland;

(c)

for the purpose of the obligations in Articles 6(4), second subparagraph, and 8(6) of Directive 2014/31/EU, respectively Articles 8(4), second subparagraph, and 10(6) of Directive 2014/32/EU and the corresponding Swiss provisions, it shall be sufficient that such obligations be fulfilled by the manufacturer established within the territory of either the European Union or Switzerland, or, in case the manufacturer is not established within the territory of either the European Union or Switzerland, by the importer established within the territory of either the European Union or Switzerland.

For the purpose of the obligation in Article 7(2) of Directive 2014/31/EU, respectively Article 9(2) of Directive 2014/32/EU and the corresponding Swiss provisions, authorised representative shall mean any natural or legal person established within the European Union or Switzerland who has received a written mandate from a manufacturer to act on his behalf pursuant to Article 7(1) of Directive 2014/31/EU, respectively Article 9(1) of Directive 2014/32/EU or the corresponding Swiss provisions.

The competent national market surveillance authority of a Member State of the European Union or Switzerland may, on reasoned request, ask the relevant economic operators in the European Union and in Switzerland to provide all the information and documentation necessary to demonstrate the conformity of instrument with the legislation in Section I.

That authority may contact the economic operator established within the territory of the other Party either directly or with the assistance of the competent national market surveillance authority of the other Party. It may request manufacturers or, where applicable, authorised representatives and importers to provide the documentation in a language easily understood by that authority. It may request the economic operators to cooperate on any action taken to eliminate the risks posed by the instrument.

Swiss designating authorities may take part in the exchange of experience between the Member States' national authorities referred to in Article 34 of Directive 2014/31/EU and Article 39 of Directive 2014/32/EU.

Swiss designated conformity assessment bodies may take part in the coordination and cooperation mechanisms provided for in Article 35 of Directive 2014/31/EU, respectively Article 40 of Directive 2014/32/EU, directly or by means of designated representatives.

Pursuant to Article 9(1) of the Agreement, the Parties shall ensure efficient cooperation and exchange of information between their market surveillance authorities. The market surveillance authorities of Member States and Switzerland shall cooperate and exchange information. They shall give each other assistance on an adequate scale by supplying information or documentation concerning economic operators based in a Member State or in Switzerland.

Pursuant to Article 12(4) of this Agreement, where the market surveillance authorities of a Member State or Switzerland have taken action or have sufficient reason to believe that an instrument covered by this chapter presents a risk to aspects of public interest protection covered by Directive 2014/31/EU or Directive 2014/32/EU, or the corresponding Swiss provisions, and if they consider that non-compliance is not restricted to their national territory, they shall inform the European Commission, the other Member States and Switzerland without delay of:

the results of the evaluation and of the actions which they have required the economic operators to take,

where the relevant economic operator does not take adequate corrective action, all appropriate provisional measures taken to prohibit or restrict the instrument's being made available on their national market, to withdraw the instrument from that market or to recall it.

This information shall include all available details, in particular the data necessary for the identification of the non-compliant instrument, the origin of the instrument, the nature of the non-compliance alleged and the risk involved, the nature and duration of the national measures taken and the arguments put forward by the relevant economic operator. In particular, it shall be indicated whether the non-compliance is due to either:

failure of the instrument to meet requirements relating to aspects of public interest protection laid down in Directive 2014/31/EU or Directive 2014/32/EU, or the corresponding Swiss provisions, or

shortcomings in the harmonised standards referred to in Directive 2014/31/EU or Directive 2014/32/EU, or the corresponding Swiss provisions.

Switzerland, or Member States shall without delay inform the European Commission and the other national authorities of any measures adopted and of any additional information at their disposal relating to the non-compliance of the instrument concerned.

Member States and Switzerland shall ensure that appropriate restrictive measures are taken in respect of the instrument concerned, such as withdrawal of an instrument from their market, without delay.

Should it disagree with the notified national measure, Switzerland or a Member State shall inform the European Commission of its objections within three months of the receipt of the information.

Where, on completion of the procedure set out in paragraph 3.4, objections are raised by a Member State or Switzerland against a measure taken by Switzerland or a Member State or where the Commission considers a national measure to be contrary to Directive 2014/31/EU or Directive 2014/32/EU, or the corresponding Swiss provisions, the European Commission shall without delay enter into consultation with the Member States, Switzerland, and via the Swiss authorities the relevant economic operator or operators. It shall evaluate the national measure, in order to determine whether the national measure is justified or not.

If the national measure relating to an instrument is considered:

justified, all Member States and Switzerland shall take the measures necessary to ensure that the non-compliant instrument is withdrawn from their markets, and shall inform the Commission accordingly,

unjustified, the Member State concerned or Switzerland shall withdraw that measure.

A Party may forward the issue to the Committee established under Article 10 of this Agreement, pursuant to paragraph 3.8.

Where a Member State or Switzerland finds that, although an instrument that an economic operator has been made available on the EU and on the Swiss market is in compliance with Directive 2014/31/EU or Directive 2014/32/EU, respectively the relevant Swiss legislation, presents a risk to aspects of public interest protection, it shall take all appropriate measures and immediately inform the Commission, other Member States and Switzerland. That information shall include all available details, in particular the data necessary for the identification of the instrument concerned, the origin and the supply chain of the instrument, the nature of the risk involved and the nature and duration of the national measures taken.

The Commission shall without delay enter into consultation with the Member States, Switzerland, and via the Swiss authorities the relevant economic operator or operators, and shall evaluate the national measures taken, in order to determine whether the national measure is justified or not, and where necessary, propose appropriate measures.

A Party may forward the issue to the Committee established under Article 10 of this Agreement, pursuant to paragraph 3.8.

In case of a disagreement between the Parties on measures at stake in subparagraphs 3.6 and 3.7 above, the issue will be forwarded to the Committee, which will decide on an appropriate course of action, including the possibility to have an expert study carried out.

Where the Committee considers that the measure is:

(a)

justified, the Parties shall take the measures necessary to ensure that the instrument is withdrawn from their market;

(b)

unjustified, the national authority of the Member State or Switzerland shall withdraw the measure.’