In Annex 1, Product Sectors, Chapter 7, Radio equipment and telecommunications terminal equipment should be deleted and replaced by the following one:
Provisions covered by Article 1(2)
[The reference to the class identifier in Article 2 of Commission Decision 2000/299/EC does not apply.] [Without prejudice to Chapter 9.]
European Union |
Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (OJ L 153, 22.5.2014, p. 62)
Commission Decision 2000/299/EC of 6 April 2000 establishing the initial classification of radio equipment and telecommunications terminal equipment and associated identifiers (OJ L 97, 19.4.2000, p. 13)
Commission Decision 2000/637/EC of 22 September 2000 on the application of Article 3(3)(e) of Directive 1999/5/EC to radio equipment covered by the regional arrangement concerning radiotelephone service on inland waterways (OJ L 269, 21.10.2000, p. 50)
Commission Decision 2001/148/EC of 21 February 2001 on the application of Article 3(3)(e) of Directive 1999/5/EC to avalanche beacons (OJ L 55, 24.2.2001, p. 65)
Commission Decision 2005/53/EC of 25 January 2005 on the application of Article 3(3)(e) of Directive 1999/5/EC of the European Parliament and of the Council to radio equipment intended to participate in the Automatic Identification System (AIS) (OJ L 22, 26.1.2005, p. 14)
Commission Decision 2005/631/EC of 29 August 2005 concerning essential requirements as referred to in Directive 1999/5/EC of the European Parliament and of the Council ensuring access of Cospas-Sarsat locator beacons to emergency services (OJ L 225, 31.8.2005, p. 28)
Commission Decision 2013/638/EU of 12 August 2013 on essential requirements relating to marine radio communication equipment which is intended to be used on non-SOLAS vessels and to participate in the Global Maritime Distress and Safety System (GMDSS) (OJ L 296, 7.11.2013, p. 22)
Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (recast) (OJ L 96, 29.3.2014, p. 357)
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) (OJ L 96, 29.3.2014, p. 79)
Switzerland |
Federal Law of 30 April 1997 on Telecommunications (LTC); (RO 1997 2187), as last amended on 12 June 2009 (RO 2010 2617)
Ordinance of 25 November 2015 on Telecommunications Equipment (OIT) (RO 2016 179)
Ordinance of 26 May 2016 of the Federal Office of Communications (OFCOM) on Telecommunications Equipment; (RO 2016 1673), as last amended on 15 June 2017(RO 2017 3201)
Ordinance of 17 June 1996 on the Swiss accreditation system and on the designation of test laboratories and conformity assessment bodies (RO 1996 1904), as last amended on 25 November 2015 (RO 2016 261)
Ordinance of 9 March 2007 on Telecommunication Services (RO 2007 945), as last amended on 5 November 2014 (RO 2014 4035)
The Committee established under Article 10 of this Agreement shall draw up and keep up to date, according to the procedure described in Article 11 of the Agreement, a list of the conformity assessment bodies.
The Committee established under Article 10 of this Agreement shall draw up and keep up to date a list of the designating authorities notified by the Parties.
For the designation of conformity assessment bodies, designating authorities shall comply with the general principles contained in Annex 2 to this Agreement and the assessment criteria set out in Chapter IV of Directive 2014/53/EU.
Without prejudice to Article 12(2) of this Agreement, the European Union shall notify Switzerland of implementing and delegated acts of the Commission under Directive 2014/53/EU adopted after 13 June 2016 without delay after their publication in the Official Journal of the European Union.
Switzerland shall notify the European Union without delay of the relevant amendments of the Swiss legislation.
Pursuant to the legislation under Section I, economic operators established in the EU or Switzerland are subject to equivalent obligations.
In order to avoid unnecessary duplication of obligations:
for the purpose of the obligations in Articles 10(7) and 12(3) of Directive 2014/53/EU and the corresponding Swiss provisions, it shall be sufficient to indicate the name, registered trade name or registered trade mark and the postal address at which the manufacturer established within the territory of either the European Union or Switzerland can be contacted. In cases where the manufacturer is not established within the territory of either the European Union or Switzerland, it shall be sufficient to indicate the name, registered trade name or registered trade mark and the postal address at which the importer established within the territory of either the European Union or Switzerland can be contacted;
for the purpose of the obligations in Articles 10(4) and 12(8) of Directive 2014/53/EU and the corresponding Swiss provisions, it shall be sufficient that the manufacturer established within the territory of either the European Union or Switzerland keep the technical documentation and the EU declaration of conformity or, where applicable, the attestation of conformity for 10 years after the radio equipment has been placed on the market in either the European Union or Switzerland. In case the manufacturer is not established within the territory of either the European Union or Switzerland, it shall be sufficient that the importer established within the territory of either the European Union or Switzerland keep a copy of the EU declaration of conformity or, where applicable, the attestation of conformity at the disposal of the market surveillance authorities and ensure that the technical documentation can be made available to those authorities upon request for 10 years after the radio equipment has been placed on the market in either the European Union or Switzerland;
for the purpose of the obligations in Article 10(5), second subparagraph, and 12(6) of Directive 2014/53/EU and the corresponding Swiss provisions, it shall be sufficient that such obligations be fulfilled by the manufacturer established within the territory of either the European Union or Switzerland, or, in case the manufacturer is not established within the territory of either the European Union or Switzerland, by the importer established within the territory of either the European Union or Switzerland.
Manufacturers shall ensure that radio equipment shall be so constructed that it can be operated in at least one Member State or Switzerland without infringing applicable requirements on the use of the radio spectrum. In cases of restrictions on putting into service or of requirements for authorisation of use of radio equipment, information on the packaging shall identify restrictions existing in Switzerland, Member States or geographical areas within their territory.
For radio equipment within the scope of Article 4 of Directive 2014/53/EU and the corresponding Swiss legislation, manufacturers of radio equipment and of software allowing radio equipment to be used as intended shall, where required in the legislation under Section I, provide and continuously update the Member States, Switzerland and the Commission, with information on the compliance of intended combinations of radio equipment and software with the essential requirements set out in Directive 2014/53/EU and the corresponding Swiss legislation, in the form of a statement of compliance which includes the elements of the declaration of conformity.
As from 12 June 2018, where required in the legislation under Section I, manufacturers shall, prior to placing on the Parties' markets radio equipment within categories designated by the European Commission as affected by a low level of compliance, register their types within the central system mentioned in Article 5 of Directive 2014/53/EU. The European Commission shall allocate to each registered radio equipment type a registration number, which manufacturers shall affix on radio equipment placed on the market.
The Parties shall exchange information on registered radio equipment types affected by a low level of compliance.
The Parties shall take into account information on compliance of radio equipment provided by Switzerland and Member States when designating categories of radio equipment affected by a low level of compliance.
For the purpose of the obligation in Article 11(2) of Directive 2014/53/EU and the corresponding Swiss provisions, authorised representative shall mean any natural or legal person established within the European Union or Switzerland who has received a written mandate from a manufacturer to act on his behalf pursuant to Article 11(1) of Directive 2014/34/EU or the corresponding Swiss provisions.
The competent national market surveillance authority of a Member State of the European Union or Switzerland may, on reasoned request, ask the relevant economic operators in the European Union and in Switzerland to provide all the information and documentation necessary to demonstrate the conformity of radio equipment with the legislation in Section I.
That authority may contact the economic operator established within the territory of the other Party either directly or with the assistance of the competent national market surveillance authority of the other Party. It may request manufacturers or, where applicable, authorised representatives and importers to provide the documentation in a language easily understood by that authority. It may request the economic operators to cooperate on any action taken to eliminate the risks posed by the radio equipment.
Member States and Switzerland shall notify each other the interfaces they intend to regulate on their territory in cases foreseen under Article 8(1) of Directive 2014/53/EU. When establishing the equivalence of regulated radio interfaces and assigning a radio equipment class, the European Union shall take account of the radio interfaces regulated in Switzerland
The Parties shall inform each other of interfaces offered on their territory by public telecommunications network operators.
When the Commission intends to adopt a requirement related to categories or classes of radio equipment pursuant to Articles 2(6), 3(3), 4(2), 5(2) of Directive 2014/53/EU, it shall consult Switzerland on the issue before submitting it formally to the Committee, unless a consultation took place with the Telecommunication Conformity Assessment and Market Surveillance Committee.
Member States and Switzerland shall allow the putting into service and use of radio equipment if it complies with the legislation in Section I when it is properly installed, maintained and used for its intended purpose. They may only introduce additional requirements for the putting into service and/or use of radio equipment for reasons related to the effective and efficient use of the radio spectrum, to the avoidance of harmful interference, to the avoidance of electromagnetic disturbances or to public health.
Swiss designated conformity assessment bodies may take part in the coordination and cooperation mechanisms provided for in Article 38 of Directive 2014/53/EU, directly or by means of designated representatives.
Conformity assessment bodies shall inform the other bodies recognised under this chapter concerning type examination certificates which they have refused, withdrawn, suspended or restricted, and upon request concerning certificates they have issued.
Conformity assessment bodies shall inform the Member States and Switzerland of type examination certificates issued and/or additions thereto, in those cases where harmonised standards have not been applied or not been fully applied. The Member States, Switzerland, the European Commission and the other bodies may, on request, obtain a copy of the type examination certificates and/or additions thereto, a copy of the technical documentation and the results of the examinations carried out.
Swiss designating authorities may take part in the exchange of experience between the Member States' national authorities referred to in Article 37 of Directive 2014/53/EU.
Switzerland may participate as observer in the Telecommunication Conformity Assessment and Market Surveillance Committee work and that of its sub-groups.
Pursuant to Article 9 paragraph1 of the Agreement, the Parties shall ensure efficient cooperation and exchange of information between their market surveillance authorities. The market surveillance authorities of Member States and Switzerland shall cooperate and exchange information. They shall give each other assistance on an adequate scale by supplying information or documentation concerning economic operators based in a Member State or in Switzerland.
Where Switzerland considers that compliance with a harmonised standard does not guarantee that the essential requirements of its legislation as listed in Section I will be fulfilled, it shall inform the Committee and give its reasons.
The Committee shall consider the case and may ask the European Commission to act in accordance with the procedure provided for in Article 11 of Regulation (EU) No 1025/2012 of the European Parliament and of the Council [Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (OJ L 316, 14.11.2012, p. 12).]. The Committee shall be informed of the result of the procedure.
Pursuant to Article 12(4) of this Agreement, where the market surveillance authorities of a Member State or Switzerland have found that equipment covered by this chapter does not comply with requirements laid down in the legislation in Section I of this Chapter, and if they consider that non-compliance is not restricted to their national territory, they shall inform the European Commission, the other Member States and Switzerland without delay of:
the results of the evaluation and of the actions which they have required the economic operators to take,
where the relevant economic operator does not take adequate corrective action, all appropriate provisional measures taken to prohibit or restrict equipment being made available on their national market, to withdraw equipment from that market or to recall it.
This information shall include all available details, in particular the data necessary for the identification of the non-compliant equipment, its origin, the nature of the non-compliance alleged and the risk involved, the nature and duration of the national measures taken and the arguments put forward by the relevant economic operator. In particular, it shall be indicated whether the non-compliance is due to either:
failure of the radio equipment to meet essential requirements referred to in the legislation in Section I, or
shortcomings in the harmonised standards referred to in the legislation in Section I.
Switzerland or Member States shall without delay inform the European Commission and the other national authorities of any measures adopted and of any additional information at their disposal relating to the non-compliance of the equipment concerned.
Member States and Switzerland shall ensure that appropriate restrictive measures are taken in respect of the equipment concerned, such as its withdrawal from their market, without delay.
Should Switzerland or a Member State disagree with the national measure in paragraph 11, it shall inform the European Commission of its objections within three months of the receipt of the information.
Where, on completion of the procedure set out in paragraph 11, objections are raised by a Member State or Switzerland against a measure taken by Switzerland or a Member State or where the Commission considers a national measure to be contrary to the relevant legislation referred to in Section I, the European Commission shall without delay enter into consultation with the Member States, Switzerland, and via the Swiss authorities the relevant economic operator or operators. It shall evaluate the national measure, in order to determine whether the national measure is justified or not. If the national measure is considered:
justified, all Member States and Switzerland shall take the measures necessary to ensure that the non-compliant equipment be withdrawn or recalled from their markets, and shall inform the Commission accordingly,
unjustified, the Member State concerned or Switzerland shall withdraw that measure.
A Party may forward the issue to the Committee established under Article 10 of this Agreement, pursuant to paragraph 14.
Where a Member State or Switzerland finds that, although radio equipment that an economic operator has made available on the EU and on the Swiss market is in compliance with the legislation referred to in Section I of this Chapter, it presents a risk to health and safety of persons or to other aspects of public interest protection, it shall take all appropriate measures and immediately inform the Commission, other Member States and Switzerland. That information shall include all available details, in particular the data necessary for the identification of the product concerned, the origin and the supply chain of the product, the nature of the risk involved and the nature and duration of the national measures taken.
The Commission shall without delay enter into consultation with the Member States, Switzerland, and via the Swiss authorities the relevant economic operator or operators, and shall evaluate the national measures taken, in order to determine whether the national measure is justified or not, and where necessary, propose appropriate measures.
A Party may forward the issue to the Committee established under Article 10 of this Agreement, pursuant to paragraph 14.
In case of a disagreement between the Parties on measures pursuant to paragraphs 10 and 11 above, the issue will be forwarded to the Committee established under Article 10 of this Agreement, which will decide on an appropriate course of action, including the possibility to have an expert study carried out.
Where the Committee considers that the measure is
unjustified, the national authority of the Member State or Switzerland shall withdraw it;
justified, they shall take the appropriate measures to ensure that products are withdrawn from their market or recalled.’