1 ATTACHMENT A, Decision No 1/2017 of the Committee established under the Agreement between the European…

In forcesince 28 Jul 2017

In Annex 1, Product Sectors, Chapter 4, Medical devices should be deleted and replaced by the following one:

Provisions covered by Article 1(2)

European Union |

1.

Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices, as last amended by Regulation (EC) No 1882/2003 of the European Parliament and of the Council of 29 September 2003 (OJ L 284, 31.10.2003, p. 1)

2.

Council Directive 93/42/EEC of 14 June 1993 concerning medical devices, as last amended by Regulation (EC) No 1882/2003 of the European Parliament and the Council of 29 September 2003 (OJ L 284, 31.10.2003, p. 1)

3.

Directive 98/79/EC of the European Parliament and of the Council of 27 October 1998 on in vitro diagnostic medical devices (OJ L 331, 7.12.1998, p. 1), as last amended by Regulation (EC) No 1882/2003 of the European Parliament and the Council of 29 September 2003 (OJ L 284, 31.10.2003, p. 1) and corrected by Corrigenda (OJ L 22, 29.1.1999, p. 75 and OJ L 6, 10.1.2002, p. 70)

4.

Commission Decision 2002/364/EC of 7 May 2002 on common technical specifications for in vitro-diagnostic medical devices (OJ L 131, 16.5.2002, p. 17)

5.

Commission Directive 2003/12/EC of 3 February 2003 on the reclassification of breast implants in the framework of Directive 93/42/EEC concerning medical devices (OJ L 28, 4.2.2003, p. 43)

6.

Commission Regulation (EU) No 722/2012 of 8 August 2012 concerning particular requirements as regards the requirements laid down in Council Directives 90/385/EEC and 93/42/EEC with respect to active implantable medical devices and medical devices manufactured utilising tissues of animal origin (OJ L 212, 9.8.2012, p. 3)

7.

Commission Directive 2005/50/EC of 11 August 2005 on the reclassification of hip, knee and shoulder joint replacements in the framework of Council Directive 93/42/EEC concerning medical devices (OJ L 210, 12.8.2005, p. 41)

8.

Commission Regulation (EC) No 2007/2006 of 22 December 2006 implementing Regulation (EC) No 1774/2002 of the European Parliament and of the Council as regards the importation and transit of certain intermediate products derived from Category 3 material intended for technical uses in medical devices, in vitro diagnostics and laboratory reagents and amending that Regulation (OJ L 379, 28.12.2006, p. 98)

9.

Directive 2007/47/EC of the European Parliament and of the Council of 5 September 2007 amending Council Directive 90/385/EEC on the approximation of the laws of the Member States relating to active implantable medical devices, Council Directive 93/42/EEC concerning medical devices and Directive 98/8/EC concerning the placing of biocidal products on the market (OJ L 247, 21.9.2007, p. 21)

10.

Commission Decision 2011/869/EU of 20 December 2011 amending Decision 2002/364/EC on common technical specifications for in vitro diagnostic medical devices (OJ L 341, 22.12.2011, p. 63)

11.

Commission Directive 2011/100/EU of 20 December 2011 amending Directive 98/79/EC of the European Parliament and the Council on in-vitro diagnostic medical devices (OJ L 341, 22.12.2011, p. 50)

12.

Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (OJ L 174, 1.7.2011, p. 88)

13.

Commission Decision 2010/227/EU of 19 April 2010 on the European Databank on Medical Devices (Eudamed) (OJ L 102, 23.4.2010, p. 45)

14.

Commission Regulation (EU) No 207/2012 of 9 March 2012 on electronic instructions for use of medical devices (OJ L 72, 10.3.2012, p. 28)

15.

Commission Implementing Regulation (EU) No 920/2013 of 24 September 2013 on the designation and supervision of notified bodies under Council Directive 90/385/EEC on active implantable medical devices and Council Directive 93/42/EEC on medical devices (OJ L 253, 25.9.2013, p. 8)

Switzerland |

100.

Federal Law of 15 December 2000 on medicinal products and medical devices (RO 2001 2790), as last amended 1 January 2014 (RO 2013 4137)

101.

Federal Law of 24 June 1902 concerning the electrical weak and heavy current installations (RO 19 252 et RS 4 798), as last amended on 20 March 2008 (RO 2008 3437)

102.

Federal Law of 9 June 1977 on metrology (RO 1977 2394), as last amended on 17 June 2011 (RO 2012 6235)

103.

Federal law of 22 March 1991 on radiation protection (RO 1994 1933), as last amended on 10 December 2004 (RO 2004 5391)

104.

Ordinance of 17 October 2001 on medical devices (RO 2001 3487), as last amended on 15 April 2015 (RO 2015 999)

105.

Ordinance of 18 April 2007 on import, transit and export of animals and animal products (RO 2007 1847), as last amended on 4 September 2013 (RO 2013 3041)

106.

Ordinance of 17 June 1996 on Accreditation and Designation of Conformity Assessment Bodies (RO 1996 1904), as last amended on 15 June 2012 (RO 2012 3631)

107.

Federal Act on Data Protection of 19 June 1992 (RO 1992 1945), as last amended on 30 September 2011 (RO 2013 3215)

The Committee established under Article 10 of this Agreement shall draw up and keep up to date, according to the procedure described in Article 11 of the Agreement, a list of the conformity assessment bodies.

The Committee established under Article 10 of this Agreement shall draw up and keep up to date a list of the designating authorities notified by the Parties.

For the designation of conformity assessment bodies under this Chapter, the designating authorities shall comply with the general principles contained in Annex 2 to this Agreement and, as laid down in Implementing Regulation (EU) No 920/2013, the assessment criteria set out in Annex XI to Directive 93/42/EEC, in Annex 8 to Directive 90/385/EEC and in Annex IX to Directive 98/79/EC.

Switzerland shall make available assessors for the pool established under Implementing Regulation (EU) No 920/2013.

Any manufacturer or his authorised representative who places on the market of one of the Parties the medical devices referred to in Article 14 of Directive 93/42/EEC or Article 10 of Directive 98/79/EC shall inform the competent authorities of the Party in which he has his registered place of business of the particulars referred to in those Articles. The Parties shall reciprocally recognise that registration. The manufacturer shall not be obliged to designate a person responsible for placing devices on the market established in the territory of the other Party.

Manufacturers of both Parties shall indicate their name or trade name and address on the label of medical devices specified in Annex 1, point 13.3(a) to Directive 93/42/EEC and in vitro diagnostic medical devices specified in Annex 1, point 8.4(a), to Directive 98/79/EC. They shall not be obliged to indicate the name and address of the person responsible for placing the device on the market, of the representative or of the importer established within the territory of the other Party on the label, outer packaging or instructions for use.

For devices imported from third countries, in view of their distribution in the Union and Switzerland, the label, or the outer packaging, or instructions for use, shall contain the name and address of the single authorised representative of the manufacturer established within the Union or Switzerland, as appropriate.

In accordance with Article 9 of the Agreement, the Parties shall in particular exchange the information referred to in Article 8 of Directive 90/385/EEC, Article 10 of Directive 93/42/EEC, Article 11 of Directive 98/79/EC and Article 3 of Implementing Regulation (EU) No 920/2013.

The competent Swiss authorities shall have access to the European databases established under Article 12 of Directive 98/79/EC, Article 14a of Directive 93/42/EEC and Article 3 of Implementing Regulation (EU) No 920/2013. They shall transmit to the Commission and/or body responsible for managing the databases the data provided for in those Articles collected in Switzerland for entry into the European databases.’