TABLE A1
Parameters for which, subject to regulation 16(5), methods of analysis are prescribed
…
TABLE A2
Parameters in relation to which methods of analysis must satisfy prescribed characteristics
…
TABLE A1
Parameters for which, subject to regulation 16(5), methods of analysis are prescribed
…
TABLE A2
Parameters in relation to which methods of analysis must satisfy prescribed characteristics
…
(1) | (2)
Parameter | Method
The composition of m-CP agar is:
Basal medium
Tryptose | 30.0g
Yeast extract | 20.0g
Sucrose | 5.0g
L–cysteine hydrichloride | 1.0g
MgSO4 • 7H2O | 0.1g
Bromocresol purple | 40.0mg
Agar | 15.0g
Water | 1,000.0ml
Dissolve the ingredients of the basal medium, adjust pH to 7.6 and autoclave at 121°C for 15 minutes. Allow the medium to cool and add:
D-cycloserine | 400.0mg
Polymyxine-B sulphate | 25.0mg
Indoxyl-•-D-glucoside to be dissolved in 8ml sterile water before addition | 60.0mg
Filter – sterilised 0.5% phenolphthalein disphosphate solution | 20.0ml
Filter – sterilised 4.5% FeC13 • 6H2O | 2.0ml
Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m–CP agar at 44 ±1°C for 21 ± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.
Coliform bacteria | ISO 9308–1
Colony count 22°C – enumeration of culturable microorganisms | prEN ISO 6222
Colony count 37°C – enumeration of culturable microorganisms | pr EN 6222
Enterocci | ISO 7899–2
Escherichia coli (E. coli) | ISO 9308–1…
(1) | (2) | (3) | (4)
Parameters | Trueness % of prescribed concentration or value or specification | Precision % of prescribed concentration or value or specification | Limit of detection % of prescribed concentration or value or specification
Notes:
(i)
The method of analysis should determine total cyanide in all forms.
(ii)
The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned.
(iii)
The performance characteristics apply to the individual substances specified at 25% of the parametric value in Part I of Table B in Schedule 1.
(iv)
The performance characteristics apply to the individual substances specified at 50% of the parametric value in Part I of Table B in Schedule 1.
(v)
The performance characteristics apply to the prescribed value of 4NTU.
(vi)
The performance characteristics apply to the specification of 1NTU for water leaving treatment works.
Aluminium | 10 | 10 | 10
Ammonium | 10 | 10 | 10
Antimony | 25 | 25 | 25
Arsenic | 10 | 10 | 10
Benzene | 25 | 25 | 25
Benzo(a)pyrene | 25 | 25 | 25
Boron | 10 | 10 | 10
Bromate | 25 | 25 | 25
Cadmium | 10 | 10 | 10
Chloride | 10 | 10 | 10
Chromium | 10 | 10 | 10
Colour | 10 | 10 | 10
Conductivity | 10 | 10 | 10
Copper | 10 | 10 | 10
Cyanide | 10 | 10 | 10
1,2-dichloroethane | 25 | 25 | 10
Fluoride | 10 | 10 | 10
Iron | 10 | 10 | 10
Lead | 10 | 10 | 10
Manganese | 10 | 10 | 10
Mercury | 20 | 10 | 20
Nickel | 10 | 10 | 10
Nitrate | 10 | 10 | 10
Nitrite | 10 | 10 | 10
Pesticides and related products | 25 | 25 | 25
Polycyclic aromatic hydrocarbons | 25 | 25 | 25
Selenium | 10 | 10 | 10
Sodium | 10 | 10 | 10
Sulphate | 10 | 10 | 10
Tetrachloroethene | 25 | 25 | 10
Tetrachloromethane | 20 | 20 | 20
Trichloroethene | 25 | 25 | 10
Trihalomethanes: Total | 25 | 25 | 10
Turbidity | 10 | 10 | 10
Turbidity | 25 | 25 | 25…