4 Appendix B, Regulation (EU) 2026/693

In forcesince 19 Mar 2026

The notified body shall apply point 7.2.4.1 when issuing the EC type or design examination certificate.

[Definition of phases provided in point 7.2.4.1.1.] [Note: If a Member State has agreed with stakeholders to implement the new ETCS system version 3.0 after entry into force of the CCS TSI amendment (see clause 7.4.4), the IM shall notify the dates when the ETCS on-board system version 3.0 becomes a mandatory on-board requirement according to clause 7.4.1.3. All vehicles using these lines shall be required to implement the ETCS on-board system version 3.0.] [This concerns the new legal release of the CCS TSI with FRMCS Baseline 1 Release 1.] [Note: If a Member State has agreed with stakeholders to implement FRMCS (see clause 7.4.4), the IM shall notify the dates when the FRMCS on-board system becomes a mandatory on-board requirement according to clause 7.3.1. All vehicles using these lines shall be required to implement the FRMCS on-board system.]

No | TSI point(s) | TSI point(s) in previous version established by Regulation (EU) 2016/919 | Explanation on CCS TSI change introduced by this Regulation | Transition regime

Design phase started after 28 September 2023 | Design phase started before 28 September 2023 | Production phase | Vehicle in operation

CCS On-Board Error corrections

1 | Appendix A + point 7.2.10.3 | No mandatory implementation of error corrections published in technical opinions | CCS Subsystems with mandatory implementation of registered error corrections for functionality ETCS up to system version 2.1 and GSM-R. |

For legal releases (with maintenance of specifications) published before 1 June 2026:

If one or more registered errors in RINF are identified for the area of use for which a new authorisation is required:

the CCS subsystem integrated into a vehicle type shall implement the necessary error corrections at the latest 6 months after the update of the concerned interoperability constituents.

Note: If one or more registered errors in RINF are identified for the area of use for which no new authorisation is required, the CCS subsystem integrated into a vehicle type is considered compliant with the update of the concerned interoperability constituents (as defined in Table B3).

For legal releases (with maintenance of specifications) published before 1 June 2026:

If one or more registered errors in RINF are identified for the area of use:

the CCS subsystem integrated into a vehicle shall implement the necessary error corrections the latest

1 year after the update of the concerned interoperability constituents (as defined in Table B3) in the case no new authorisation is required;

or

1 year after the update of the vehicle type in the case a new authorisation is required.

For legal releases (with maintenance of specifications) published after 1 June 2026:

If one or more registered errors in RINF are identified for the area of use for which a new authorisation is required:

the CCS subsystem integrated into a vehicle type shall implement the full maintenance package of error corrections at the latest 6 months after the update of the concerned interoperability constituents.

Note: If one or more registered errors in RINF are identified for the area of use for which no new authorisation is required, the CCS subsystem integrated into a vehicle type is considered compliant with the update of the concerned interoperability constituents (as defined in Table B3).

For legal releases (with maintenance of specifications) published after 1 June 2026:

If one or more registered errors in RINF are identified for the area of use:

the CCS subsystem integrated into a vehicle shall implement the full maintenance package of error corrections the latest

1 year after the update of the concerned interoperability constituents (as defined in Table B3) in the case no new authorisation is required;

or

1 year after the update of the vehicle type in the case a new authorisation is required.

ETCS On-Board implementation

2 | Points 7.4.2.1, and 7.4.3 | 7.4.2.1.2. and 7.4.3(2) grants exemptions for new vehicles to be equipped with ETCS |

7.4.2.1.2. and point 7.4.3(2) deleted.

All newly built vehicles shall be equipped with ETCS.

Directly applicable

Note: Design phase started after 28 September 2023 here relates to “RST design phase” for any vehicles without ETCS.

For special vehicles applicable from 1 January 2026 unless Member States have issued decisions in accordance with 7.4.3.2.

Applicable if design phase ends on or after 1 January 2028

Note: Design phase started before 28 September 2023 here relates to “RST design phase” for any vehicles without ETCS.

For special vehicles applicable if design phase ends on or after 1 January 2030 unless Member States have issued decisions in accordance with 7.4.3.2.

Applicable for newly built vehicles placed on the market on or after 1 January 2030

For special vehicles applicable for newly built vehicles placed on the market on or after 1 January 2030 unless Member States have issued decisions in accordance with 7.4.3.2.

Not applicable

3 | Points 7.4.2.2 and 7.4.3. | 7.4.2.2 only applicable to upgrade of existing high-speed vehicles | 7.4.2.2 applicable to vehicle type and/or vehicles requiring a new authorisation |

Directly applicable

For special vehicles applicable unless Member States have issued decisions in accordance with 7.4.3.2:

if design phase starts on or after 1 January 2026;

or

if design phase ends on or after 1 January 2030.

Applicable if design phase ends on or after 1 January 2028

Note: Remains directly applicable to high-speed vehicles according to previous CCS TSI.

For special vehicles applicable if design phase ends on or after 1 January 2030 unless Member States have issued decisions in accordance with 7.4.3.2.

Not applicable

Note: Remains directly applicable to high-speed vehicles according to previous CCS TSI.

Not applicable

4 | Point 7.4.2.3 (3) | 7.4.2.4 extension area of use: exemptions to install ETCS in point (3) |

7.4.2.3 extension area of use: exemptions deleted in point (3)

Note: the implementation requirements of CCS TSI established by Regulation (EU) 2016/919 in 7.4.2.4 point (3) remain directly applicable.

Not applicable | Not applicable | Not applicable | Applicable from 1 January 2030, if the installation of ETCS is indicated in RINF for the subsequent five years in the new area of use or if the area of use is at least three Member States

ETCS system versions

5 | Intentionally deleted | | | | | |

6 | Appendix A – 7.4.2.4.1 and 7.4.2.4.2 for envelope of legally operated ETCS system versions from 1.0 up to 2.2. | Not applicable | On-board implementation of notified ETCS functions from system version 2.2. |

Design phase started on or after notification from IM and notification is done on or after 1 January 2025:

the ETCS system version 2.2 is directly applicable.

The ETCS system version 2.2 is applicable if the design phase is not ended within the latest date between following dates:

1 January 2030;

5 years after the date of the notification provided by the IM.

Not applicable | Not applicable

Design phase started before notification from IM or notification is done before 1 January 2025:

the ETCS system version 2.2 is applicable if the design phase is not ended within the latest date between following dates:

1 January 2030;

5 years after the notification date from the IM.

7 | Appendix A – 7.4.2.4.1, 7.4.2.4.2 and 7.4.1.3 for envelope of legally operated ETCS system versions from 1.0 up to 3.0 | Not applicable | On-board implementation of notified ETCS functions from system version 3.0. |

Not applicable.

Note: Transition regime after entry into force of CCS TSI amendment:

Design phase started after notification from IM and notification is done 2 years after entry into force of the CCS TSI amendment:

the ETCS system version 3.0 is directly applicable.

Not applicable.

Note: Transition regime after entry into force of CCS TSI amendment:

The ETCS system version 3.0 is applicable if the design phase has not ended within the latest date between following dates:

5 years after entry into force of the CCS TSI amendment containing the harmonised FRMCS specifications;

5 years after the day of the notification provided by the IM.

Not applicable.

Note: Transition regime after entry into force of CCS TSI amendment:

the notified ETCS system version 3.0 is mandatory when required for compatibility with the ETCS trackside implementation of ETCS TS 3.0.

Not applicable.

Note: Transition regime after entry into force of CCS TSI amendment:

the notified ETCS system version 3.0 is mandatory when required for compatibility with the ETCS trackside implementation of ETCS TS 3.0.

Design phase started before notification from IM or notification is done before entry into force of CCS TSI amendment:

see transition regime in column “Design phase started before 28 September 2023”.

8 | Intentionally deleted | | | | | |

Former sets of specifications #2 and #3

9 |

Appendix A – Table A 1

and Table A 2

7.4.2.4.1 and 7.4.2.4.2

7.4.2.3 (7)

Annex A – Table A 1 – Table A 2 2 – Set of specification #2

The minimum reduced on-board envelope is the envelope up to ETCS system version 2.0.

The specifications in Appendix A – Table A 1 and Table A 2 does not include ETCS system version 2.0, since the minimum reduced on-board envelope is the envelope up to ETCS system version 2.1. |

Applicable

if design phase starts on or after 28 September 2026;

or

if design phase ends on or after 1 January 2030.

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

Applicable if design phase ends on or after 1 January 2030

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

Applicable on newly built vehicles placed on the market from 1 January 2030

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

Not applicable

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

10 |

Appendix A – Table A 1

and Table A 2

Annex A – Table A 1 and Table A 2 3 – Set of specification #3 |

The specifications in Appendix A - Table A 1

and Table A 2 have the agreed error corrected version of former set #3

Applicable

if design phase starts on or after 28 September 2026;

or

if design phase ends on or after 1 January 2030.

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

Applicable if design phase ends on or after 1 January 2030

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

Applicable on newly built vehicles placed on the market from 1 January 2032

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

Not applicable

In any case the error correction provisions in point 7.2.10 shall be respected with its corresponding transition period.

No constraint shall be exported to the other subsystem.

CMD

11 | 4.2.2 (b) – Cold Movement Detection | CMD Optional | CMD Mandatory | Directly applicable when ETCS is installed for the first time into a vehicle design. | Applicable if design phase ends after 1 January 2028 when ETCS is installed for the first time into a vehicle design. | Applicable on newly built vehicles placed on the market from 1 January 2030. | Not applicable

ATO On-Board Implementation

12 | 4.2.18 + Point 7.2.9.2 | Not applicable | ATO on-board specification and implementation requirements |

Design phase started on or after notification from IM and notification is done on or after 1 January 2025:

ATO on-board requirements are directly applicable.

Design phase started before notification from IM or notification is done before 1 January 2025:

ATO On-board requirements are applicable if the design phase is not ended within the latest date between following dates:

1 January 2030;

5 years after the notification date from the IM.

ATO on-board requirements are applicable if the design phase is not ended within the latest date between following dates:

1 January 2030;

5 years after the day of the notification provided by the the IM.

Not applicable | Not applicable

CCS On-Board Modularity

13 |

4.2.6.5.1 CCS Consist network communication layers

Index 90

+ point 5.2.2.2

Not applicable |

Mandatory implementation of Ethernet based platform

New requirement in case of grouping of Interoperability Constituents defined in Table 5.1

Applicable on newly developed vehicle designs requiring first authorisation

if design phase starts on or after 28 September 2025;

or

if design phase ends on or after 28 September 2030.

Applicable on newly developed vehicle designs requiring first authorisation if design phase ends on or after 28 September 2030 | Not applicable | Not applicable

14 |

4.2.2.2(7)-4.2.18 (3)

Forwarding information/orders and receiving state information from rolling stock:

4.2.6.5.1 CCS Consist network communication layers

Appendix A – CCS and RST interfaces

Indexes 81, 82, 88, 90

Not applicable | Mandatory implementation of on-board interfaces between CCS subsystem and RST subsystem |

Applicable on newly developed vehicle designs requiring first authorisation

if design phase starts on or after 28 September 2025;

or

if design phase ends on or after 28 September 2030.

Applicable on newly developed vehicle designs requiring first authorisation if design phase ends on or after 28 September 2030 | Not applicable | Not applicable

FRMCS On-Board implementation:

15 | Point 7.3.2.2 | Not applicable | FRMCS on-board implementation (3) |

Not applicable.

Note: Transition regime after TSI amendment:

Design phase started after notification from IM and notification is done after 2 years of the entry into force of CCS TSI amendment: FRMCS on-board implementation is directly applicable.

Not applicable.

Note: Transition regime after TSI amendment:

FRMCS on-board is applicable if the design phase is not ended within the latest date between following dates:

5 years after the CCS TSI amendment containing the FRMCS specifications;

5 years after the day of the notification provided by the IM.

Not applicable.

Note: The FRMCS on-board implementation is mandatory when required for compatibility with FRMCS only trackside implementation

Not applicable.

Note: The FRMCS on-board implementation is mandatory when required for compatibility with FRMCS only trackside implementation

Design phase started before notification from IM:

see transition regime in column “Design phase started before before 28 September 2023”.

Partial fulfilment:

16 | Point 6.1.1.2 | Points 6.1.1.3 and 6.4.3 are deleted. | With respect to 6.1.1.2 it is no longer possible to exclude mandatory functionalities, interfaces or performance except if listed in Appendix G. |

Applicable

if design phase ends on or after 28 September 2030

In cases of partial fulfilment, a condition for use shall be included when authorising vehicles to be placed on the market, enforcing compliance at the next upgrade of the vehicle train protection part.

Functions included in system versions 2.2 and 3.0 which are not implemented due to partial fulfilment and which are not essential for the intended area of use, shall be implemented at the earliest occurrence of one of the following:

(a)

At the next reauthorisation resulting from another change to the vehicle train protection (ETCS) system;

(b)

At the next upgrade to a higher system version of the ETCS train protection part.

Not applicable | Not applicable

DMI indication translation

17 | Appendix E | No mandatory harmonised translation of DMI indications | Harmonised translation of DMI indications. | Directly applicable | Applicable if design phase ends on or after 28 September 2030. | Not applicable | Not applicable

ESC/RSC Statements

18 |

4.2.17 ETCS and radio system compatibility

6.2.4.3 ETCS and radio system compatibility checks for interoperability constituent

6.3.3.1 ETCS and radio system compatibility checks

First version of the requirements for ESC/RSC Statements. | Updated requirements for assessment of ESC/RSC Statements, including the ESC/RSC IC Statement. | Applicable if design phase ends after 28 March 2024. | Applicable if design phase ends after 28 March 2024. | Not applicable | Not applicable

System identifier

19 |

4.2.20.3 System identifier

Table 6.2.1, row 2d

Not applicable | NoBo check for system identifier. | Applicable if design phase ends after 28 March 2024. | Applicable if design phase ends after 28 March 2024. | Not applicable | Not applicable

Subsystem certificate and integration between parts

20 |

4.2.6 On-board interfaces internal to CCS.

Table 6.2.1, row 3

6.4 Provisions in cases of partial assessment of TSI requirements

Not explicitly addressed in the table. |

Integration between parts of the subsystem.

Structure of the subsystem certificates

Note: Not a new requirement but clarification.

Directly applicable | Directly applicable | Not applicable | Not applicable

Appendix D template

21 |

6.5.1 Content of EC certificates

6.5.2 Content of EC declarations

Not applicable | Mandatory use of the Appendix D template in EC certificates and EC declarations. | Applicable if design phase ends after 28 March 2024. | Applicable if design phase ends after 28 March 2024. | Not applicable | Not applicable

Specific cases

22 |

Point 7.7.2

7.7.2.9 Italy 7.7.2.12 Ireland 7.7.2.14 Austria

7.6.2 Previous version of specific cases. | Update of specific cases by introducing new requirements for the CCS on-board subsystem for certain Member States. | Directly applicable | Directly applicable | Applicable for newly built vehicles placed on the market as of 1 January 2030 | Not applicable

Standards

23 | Appendix A Table A3 | Annex A Table A3 | New standard EN50716 has superseded EN50128 | Directly applicable | Applicable if design phase ends after 30th October 2026 | Not applicable | Not applicable

No | TSI point(s) | TSI point(s) in the version before the change introduced by Implementing Regulation (EU) 2026/693 | Explanation on CCS TSI change introduced by Implementing Regulation (EU) 2026/693 | Transition regime

Design phase started after 5 May 2026 | Design phase started before 5 May 2026 | Production phase | Vehicle in operation

Test specifications

1 | Appendix A, Table A 2, Index 98 | Index 98 was reserved. | The final version of the document is included. | Applicable if design phase ends after 1 January 2026 if ATO part (ATO Baseline 1 Release 1) is implemented. | Applicable if design phase ends after 1 January 2026 if ATO part (ATO Baseline 1 Release 1) is implemented. | Not applicable | Not applicable

Reduced envelopes

2 | Appendix A, Table A 2, Indexes 104, 84, 85 |

Index 104 was reserved.

ATO on-board implementation based on index 84, 85 v1.0.0.

The final version of the document is included, and second row from Appendix G is removed.

Table A1 references to index 104 are completed were necessary.

ATO on-board implementation based on index 84, 85 v1.1.0.

Applicable if design phase ends after 1 January 2026 if ETCS Baseline 4 Release 1 or ATO Baseline 1 Release 1 is implemented. | Applicable if design phase ends after 1 January 2026 if ETCS Baseline 4 Release 1 or ATO Baseline 1 Release 1 is implemented. | Not applicable | Not applicable

DMI Indication translations

3 | Appendix E | Appendix E | Addition of missing terms | Same as Table B1.1, row 17

Transition regime clarification

4 | Appendix B. Table B1.1 | Appendix B, Table B1.1 clarifications | Clarifications and corrections regarding transition regime. | Directly applicable

[Definition of phases provided in point 7.2.4.1.1.]

No | TSI point(s) | TSI point(s) in the version established by Regulation (EU) 2016/919 | Explanation on CCS TSI change introduced by this Regulation | Transition regime

Design phase started after 28 September 2025 | Design phase started before 28 September 2025 | Production phase | Vehicle in operation

1 | Index 77 | V4 – Frequency management not fully defined for the vehicle | V5 – Frequency management fully defined for the vehicle |

Directly applicable with the exception of point 3.2.2. This point is applicable to newly developed vehicle designs requiring first authorisation as defined in Article 14(1)(a) of Commission Implementing Regulation (EU) 2018/545 if design phase starts on or after 28 September 2025 or if design phase ends on or after 28 September 2030;

Applicable to modified vehicle designs requiring new authorisation as defined in Article 14(1)(d) of Commission Implementing Regulation (EU) 2018/545 if design phase ends on or after 28 September 2030.

Applicable if design phase ends on or after 28 September 2030. | Not applicable | Not applicable

2 |

Point 7.7.2

7.7.2.5 Lithuania, Latvia and Estonia

7.7.2.7 Luxembourg

7.7.2.9 Italy

7.7.2.12 Ireland

7.7.2.13 Bulgaria

7.6.2 Previous version of specific cases. | Update of specific cases by introducing new requirements for the RST subsystem for certain Member States. | Directly applicable. | Applicable if design phase ends on or after 28 September 2030. | Not applicable | Not applicable

No | TSI point(s) | TSI point(s) in previous version established by Regulation (EU) 2023/1695 | Explanation on CCS TSI change in Regulation (EU) 2026/693 | Transition regime

Design phase started after 5 May 2026 | Design phase started before 5 May 2026 | Production phase | Vehicle in operation

1 | Appendix B, Table B1.2 | Appendix B, Table B1.2 clarifications | Clarifications and corrections regarding transition regime. | Directly applicable

The notified body shall apply point 7.2.4.2 and 7.4.1.2 when issuing the EC type or design examination certificate.

No | TSI point(s) | TSI point(s) in the version established by Regulation (EU) 2016/919 | Explanation on CCS TSI change introduced by this Regulation | Transition regime

CCS Trackside Error Corrections

1 |

Appendix A

+ Points 7.4.1.2 and 7.2.10.3

Set 1, 2 and 3 of specifications without error corrections | Table A2 includes the maintenance of the functions into 1 set of specifications. |

CCS Trackside Subsystems, which are in advanced stage of development or in operation, shall implement the identified set of corrections for the unacceptable errors as described in point 7.2.10.1 within:

2 years and 6 months after the publication by the Agency of the Baseline Compatibility Analysis (BCA) including the answers to the questionnaires in case no new authorisation is required:

This article is long: the rest is at the official publication.