3 Appendix A [In former versions of the TSI this was named Annex A. In some of the documents of Table A 2 the references to CCS TSI Annex A shall be read as CCS TSI Appendix A.] References, Regulation (EU) 2026/693

In forcesince 19 Mar 2026

For each reference made in the basic parameters (point 4 of this TSI) the following table indicates the corresponding mandatory specifications, via the Index in Table A 2.

Reference in Chapter 4 | Index number (see Table A 2)

4.1 |

4.1 a | Intentionally deleted

4.1 b | Intentionally deleted

4.1 c | 3, 102

4.2.1 |

4.2.1 a | 27, 104

4.2.2 |

4.2.2 a | 14, 104

4.2.2 b | 4, 13, 60, 104

4.2.2 c | 31, 37 b, 37 c, 37 d, 104

4.2.2 d | 20

4.2.2 e | 6, 104

4.2.2 f | 7, 81, 82, 104

4.2.2 g | Intentionally deleted

4.2.2 h | 84, 87, 104

4.2.3 |

4.2.3 a | 14

4.2.3 b | 4, 13, 60

4.2.4 |

4.2.4 a | 64, 65

4.2.4 b | 66

4.2.4 c | 67

4.2.4 d | 68

4.2.4 e | 73, 74

4.2.4 f | 32, 33

4.2.4 g | 48

4.2.4 h | 69, 70

4.2.4 i | Intentionally deleted

4.2.4 j | 71, 72

4.2.4 k | 75, 76

4.2.4 l | 93, 94, 95, 99

4.2.4 m | 93, 94, 95

4.2.4 n | 96

4.2.4 o | 97

4.2.5 |

4.2.5 a | 64, 65

4.2.5 b | 10a, 10b, 10d, 34, 39, 40, 104

4.2.5 c | 19, 20

4.2.5 d | 9, 43

4.2.5 e | 16, 50

4.2.5 f | 93, 94, 95, 104

4.2.5 g | Intentionally deleted

4.2.5 h | 86, 10a, 10d, 33, 34, 104

4.2.5 i | 86, 10a, 10c, 10d, 92, 94, 95, 104

4.2.5 j | 10a, 10b, 10c, 10d, 39, 40, 92, 94, 95

4.2.6 |

4.2.6 a | 8, 25, 26, 36 c, 49, 52, 104

4.2.6 b | 29, 45

4.2.6 c | 46

4.2.6 d | 10a,10b, 10d, 34, 104

4.2.6 e | 10a, 20, 104

4.2.6 f | Intentionally deleted

4.2.6 g | 92, 10a, 10b, 10c, 10d, 104

4.2.6 h | 87, 89, 104

4.2.6 i | 90, 104

4.2.6 j | 10a, 10d, 34, 104

4.2.6 k | 92, 10a, 10c, 10d, 104

4.2.6 l | 92, 93, 99, 94, 95, 104

4.2.7 |

4.2.7 a | 12

4.2.7 b | 63

4.2.7 c | 34, 10a, 10b, 10d

4.2.7 d | 9

4.2.7 e | 16

4.2.7 f | 92, 10a, 10b, 10c, 10d

4.2.7 g | 34, 10a, 10d

4.2.7 h | 92, 10a, 10c, 10d

4.2.8 |

4.2.8 a | 10d, 11, 79, 83, 104

4.2.9 |

4.2.9 a | 23

4.2.10 |

4.2.10 a | 77 (point 3.1)

4.2.11 |

4.2.11 a | 77 (point 3.2)

4.2.12 |

4.2.12 a | 6, 104

4.2.13 |

4.2.13 a | 32, 33

4.2.13 b | 93, 94

4.2.14 |

4.2.14 a | 5, 104

4.2.15 |

4.2.15 a | 38

4.2.15 b | 101

4.2.17 |

4.2.17 a | 103

4.2.18 |

4.2.18 a | 84, 85, 104

4.2.18 b | 98

4.2.18 c | 88

4.2.18 d | 87, 104

4.2.19 |

4.2.19 a | 84, 85

4.2.19 b | 98

When a document listed in Table A 2 incorporates, by copying or by reference to, a clearly identified point of another document, this point, and only this, shall be considered as part of the document listed in Table A 2.

For the purposes of this TSI, when a document listed in Table A 2 makes a “mandatory” or “normative” reference to a document not listed in Table A 2, the referenced document shall always be understood as an acceptable means of compliance with basic parameters (that can be used for certification of Interoperability Constituents and Subsystems and not requiring future revisions of the TSI) and not as a mandatory specification.

Note: specifications indicated as “Reserved” in Table A 2 are also listed as open points in Appendix F when there is a need for notification of national rules to close the corresponding open points. Reserved documents not listed as open points are intended as improvements to the system.

Note 1: The points of the specifications listed in point 2.1 of EN 301515 which are referenced in Index 32 and Index 33 as “MI” are mandatory.

Note 2: The change requests (CRs) listed in table 1 and 2 of TS 102281 which affect points referenced in Index 32 and Index 33 as “MI” are mandatory.

Note 3: Index 48 refers only to test cases for GSM-R mobile equipment. It is kept “reserved” for the time being. When agreed in a future revision of the TSI, the catalogue of available harmonised test cases for the assessment of mobile equipment and networks, according to the steps indicated in point 6.1.2 of this TSI, will be introduced in these tables.

Note 4: The products which are on the market are already tailored to the needs of the RU related to GSM-R Driver Machine Interface and fully interoperable so there is no need for a standard in the TSI CCS.

Note 5: Information that was intended for index 78 is now incorporated in Index 27 (SUBSET-091).

Note 6: This document is ETCS, RMR and ATO baseline independent.

Note 7: Only the (MI) requirements are mandated by TSI CCS.

Note 8: These specifications, as regards to ETCS and ATO on board equipment, shall be fully implemented.

Note 9: These specifications, in their current version, as regards to FRMCS on-board equipment, are not considered complete for the purpose of tendering the on-board equipment.

Index No | ETCS Baseline 4 Release 1; RMR: GSM-R Baseline 1 Maintenance Release 1 + FRMCS Baseline 0; ATO Baseline 1 Release 1

Reference | Name of Specification | Version | Notes

1 | Intentionally deleted | | |

2 | Intentionally deleted | | |

3 | SUBSET-023 | Glossary of Terms and Abbreviations | 4.0.0 |

4 | SUBSET-026 | System Requirements Specification | 4.0.0 |

5 | SUBSET-027 | FIS Juridical Recording | 4.0.0 |

6 | ERA_ERTMS_015560 | ETCS Driver Machine interface | 4.0.0 |

7 | SUBSET-034 | Train Interface FIS | 4.0.0 |

8 | SUBSET-035 | Specific Transmission Module FFFIS | 4.0.0 |

9 | SUBSET-036 | FFFIS for Eurobalise | 4.0.0 |

10a | SUBSET-037-1 |

EuroRadio FIS GSM-R – Part 1

[Communication layer and coordination function]

4.0.0 |

10b | SUBSET-037-2 |

EuroRadio FIS – Part 2

[Safety layer]

4.0.0 |

10c | SUBSET-037-3 |

EuroRadio FIS – Part 3

[FRMCS interface]

4.0.0 |

10d | SUBSET-146 | ERTMS End-to-End Security | 4.0.0 |

11 | SUBSET-038 | Offline key management FIS | 4.0.0 |

12 | SUBSET-039 | FIS for the RBC/RBC handover | 4.0.0 |

13 | SUBSET-040 | Dimensioning and Engineering rules | 4.0.0 |

14 | SUBSET-041 | Performance Requirements for Interoperability | 4.0.0 |

15 | Intentionally deleted | | |

16 | SUBSET-044 | FFFIS for Euroloop | 2.4.0 |

17 | Intentionally deleted | | |

18 | Intentionally deleted | | |

19 | SUBSET-047 | Trackside-Trainborne FIS for Radio infill | 4.0.0 |

20 | SUBSET-048 | Trainborne FFFIS for Radio infill | 3.0.0 |

21 | Intentionally deleted | | |

22 | Intentionally deleted | | |

23 | SUBSET-054 | Responsibilities and rules for the assignment of values to ETCS variables | 4.0.0 |

24 | Intentionally deleted | | |

25 | SUBSET-056 | STM FFFIS Safe time layer | 3.0.0 |

26 | SUBSET-057 | STM FFFIS Safe link layer | 3.1.0 |

27 | SUBSET-091 | Safety Requirements for the Technical Interoperability of ETCS | 4.0.0 |

28 | Intentionally deleted | | |

29 | SUBSET-102 | Test specification for interface “K” | 2.0.0 |

30 | Intentionally deleted | | |

31 | SUBSET-094 | Functional requirements for an on-board reference test facility | 4.0.0 |

32 | EIRENE FRS | GSM-R Functional requirements specification | 8.1.0 | Note 7

33 | EIRENE SRS | GSM-R System requirements specification | 16.1.0 | Note 7

34 | A11T6001 | (MORANE) Radio Transmission FFFIS for EuroRadio | 14.0.0 |

35 | Intentionally deleted | | |

36a | Intentionally deleted | | |

36b | Intentionally deleted | | |

36c | SUBSET-074-2 | FFFIS STM Test cases document | 4.0.0 |

37a | Intentionally deleted | | |

37b | SUBSET-076-5-2 | Test cases related to features | 4.0.0 |

37c | SUBSET-076-6-3 | Test sequences | 4.0.0 |

37d | SUBSET-076-7 | Scope of the test specifications | 4.0.0 |

37e | Intentionally deleted | | |

38 | EN 16494 | Railway applications. Requirements for ERTMS Trackside Boards | 2025 |

39 | SUBSET-092-1 | ERTMS EuroRadio Conformance Requirements | 4.0.0 |

40 | SUBSET-092-2 | ERTMS EuroRadio test cases safety layer | 4.0.0 |

41 | Intentionally deleted | | |

42 | Intentionally deleted | | |

43 | SUBSET-085 | Test specification for Eurobalise FFFIS | 4.0.0 |

44 | Intentionally deleted | | |

45 | SUBSET-101 | Interface “K” Specification | 2.0.0 |

46 | SUBSET-100 | Interface “G” Specification | 2.0.0 |

47 | Intentionally deleted | | |

48 | Reserved | Test specification for mobile equipment GSM-R | | Note 3

49 | SUBSET-059 | Performance requirements for STM | 4.0.0 |

50 | SUBSET-103 | Test specification for Euroloop | 1.1.0 |

51 | Intentionally deleted | | |

52 | SUBSET-058 | FFFIS STM Application layer | 4.0.0 |

53 | Intentionally deleted | | |

54 | Intentionally deleted | | |

55 | Intentionally deleted | | |

56 | Intentionally deleted | | |

57 | Intentionally deleted | | |

58 | Intentionally deleted | | |

59 | Intentionally deleted | | |

60 | SUBSET-104 | ETCS System Version Management | 4.0.0 |

61 | Intentionally deleted | | |

62 | Intentionally deleted | | |

63 | SUBSET-098 | RBC-RBC Safe Communication Interface | 4.0.0 |

64 | EN 301515 | Global System for Mobile Communication (GSM); Requirements for GSM operation on railways | 3.0.0 | Note 1

65 | TS 102281 | Detailed requirements for GSM operation on railways | 3.1.1 | Note 2

66 | TS 103169 | ASCI Options for Interoperability | 1.1.1 |

67 | (MORANE) P 38 T 9001 | FFFIS for GSM-R SIM Cards | 6.0.0 | Note 7

68 | ETSI TS 102610 | Railway Telecommunication; GSM; Usage of the UUIE for GSM operation on railways | 1.3.0 |

69 | (MORANE) F 10 T 6002 | FFFS for Confirmation of High Priority Calls | 5 |

70 | (MORANE) F 12 T 6002 | FIS for Confirmation of High Priority Calls | 5 |

71 | (MORANE) E 10 T 6001 | FFFS for Functional Addressing | 4.1 |

72 | (MORANE) E 12 T 6001 | FIS for Functional Addressing | 5.1 |

73 | (MORANE) F 10 T6001 | FFFS for Location Dependent Addressing | 4 |

74 | (MORANE) F 12 T6001 | FIS for Location Dependent Addressing | 3 |

75 | (MORANE) F 10 T 6003 | FFFS for Presentation of Functional Numbers to Called and Calling Parties | 4 |

76 | (MORANE) F 12 T 6003 | FIS for Presentation of Functional Numbers to Called and Calling Parties | 4 |

77 | ERA/ERTMS/033281 | Interfaces between CCS trackside and other subsystems | 5.1 | Note 6

78 | Intentionally deleted | | | Note 5

79 | SUBSET-114 | KMC-ETCS Entity Off-line KM FIS | 4.0.0 |

80 | Intentionally deleted | | | Note 4

81 | SUBSET-119 | Train Interface FFFIS | 4.0.0 |

82 | SUBSET-120 | Train Interface - Safety requirements | 4.0.0 |

83 | SUBSET-137 | On-line Key Management FFFIS | 4.0.0 |

84 | SUBSET-125 |

ERTMS/ATO

System Requirement Specification

1.1.0 |

85 | SUBSET-126 | ATO-OB/ATO-TS FFFIS Application Layer | 1.1.0 |

86 | SUBSET-148 | ATO-OB/ATO-TS FFFIS Transport and Security Layers | 1.0.0 |

87 | SUBSET-130 |

ATO-OB/ETCS-OB FFFIS

Application Layer

1.0.0 |

88 | SUBSET-139 | ATO OB/Rolling Stock FFFIS Application Layer | 1.0.0 |

89 | SUBSET-143 | Interface Specification Communication Layers for On-board Communication | 1.0.0 |

90 | SUBSET-147 | CCS Consist network communication Layers FFFIS | 1.0.0 |

91 | Intentionally deleted | | |

92 | FFFIS-7950 | FRMCS FFFIS | 1.0.0 | Note 8

93 | FU-7120 | FRMCS FRS | 1.0.0 | Note 9

94 | AT-7800 | FRMCS SRS | 1.0.0 | Note 9

95 | FIS-7970 | FRMCS FIS | 1.0.0 | Note 8

96 | Reserved | [FFFIS for FRMCS profile placeholder] | |

97 | Reserved | [FRMCS Test specifications placeholder] | |

98 | SUBSET-151 | ATO-OB/ATO-TS Test Specifications | 1.0.0 |

99 | TOBA-7510 | On-board FRMCS TOBA FRS | 1.0.0 | Note 9

100 | Intentionally deleted | | |

101 | 21E089 | Engineering rules for harmonised marker boards | 2- |

102 | 13E154 | ERTMS/ATO Glossary | 2- |

103 | TD/011REC1028 | ESC/RSC technical document | Version published in ERA website |

104 | SUBSET-153 |

ERTMS/ETCS & ERTMS/ATO

Exceptions for on-board reduced envelopes of ETCS system versions

1.0.0 |

The application of the version of the standards listed in the table below, and their subsequent amendments when published as harmonised standard in the certification process is an appropriate means to fully comply to the risk management process as set out in Annex I to the Implementing Regulation (EU) No 402/2013, without prejudice to the points 4 and 6 of this TSI.

Note 1: This standard is harmonised, see “Commission Communication in the framework of the implementation of Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (recast)” and “Commission Implementing Decision (EU) 2020/453 on the harmonised standards for railway products drafted in support of Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community”, where also published editorial corrigenda are indicated.

Note 2: To be used in combination with EN 50126-1:2017.

Note 3: Previous EN 50128 can still be used according to Table B1.1 and B2 table.

[OJ C 282, 10.8.2018.] [Commission Implementing Decision (EU) 2020/453 of 27 March 2020 on the harmonised standards for railway products drafted in support of Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community (OJ L 95, 30.3.2020, ELI: http://data.europa.eu/eli/dec_impl/2020/453/oj).]

No | Reference | Document name and comments | Version | Note

A1 | EN 50126-1 | Railway applications – The specification and demonstration of reliability, availability, maintainability and safety (RAMS) – Part 1: Generic RAMS Process | 2017 | 1

A2 | EN 50716 | Railway Applications – Requirements for software development | 2023 | 3

A3 | EN 50129 | Railway applications – Communication, signalling and processing systems – Safety related electronic systems for signalling | 2018 + AC:2019 | 1

A4 | EN 50159 | Railway applications – Communication, signalling and processing systems | 2010 + A1:2020 | 1

A5 | EN 50126-2 | Railway Applications – The specification and demonstration of reliability, availability, maintainability and safety (RAMS) – Part 2: Systems Approach to Safety | 2017 | 1, 2

No | Reference | Document name and comments | Version | Note

A6 | ISO/IEC 17025 | General requirements for the competence of testing and calibration laboratories | 2017 |