Art. 14 Regulation (EU) 2025/1707

OBM monitoring status and eligibility of vehicles for in-service conformity checks

In forcesince 5 Sep 2025
1.

Vehicles with at least one OBM monitoring status referred to in Article 5 set to ‘Error’ shall not be eligible for in-service conformity testing of exhaust emissions in accordance with Article 10 of Implementing Regulation (EU) 2025/1706. Exhaust emissions in-service conformity tests where at least one OBM monitoring status transitions to ‘Error’ after the test shall be void.

2.

During in-service conformity testing of exhaust emissions in accordance with Article 10 of Implementing Regulation (EU) 2025/1706, the following shall be considered as warning signals that may suggest malfunctioning in accordance with point 8.3.2 of UN Regulation No 168 [UN Regulation No 168 – Uniform provisions concerning the approval of light duty passenger and commercial vehicles with regards to real driving emissions (RDE) (OJ L, 2024/211, 12.1.2024, ELI: http://data.europa.eu/eli/reg/2024/211/oj). In the case of a UN Regulation the series of amendments indicated reflects the version that has been published in the Official Journal of the European Union. Compliance with a series of amendments adopted after the particular series indicated shall be accepted as an alternative.]:

(a)

the presence of one or more OBM monitoring statuses set to ‘Error’ as referred to in Article 5(1), point (c);

(b)

the presence of one or more ongoing OBD faults for which a malfunction indicator is active;

(c)

other faults that are apparent from a visual inspection of the vehicle prior to the trip.

3.

Vehicles with at least one OBM monitoring status set to ‘Error’ prior to testing shall not be eligible for in-service conformity checks of the OBM system. Such vehicles shall, however, be eligible to perform a verification in accordance with Article 15.

4.

Vehicles with at least one monitoring status set to ‘Intermediate’ prior to testing shall be eligible for in-service conformity testing of exhaust emissions in accordance with Article 10 of Commission Implementing Regulation (EU) 2025/1706 and for in-service conformity checks of the OBM system in accordance with Annex IV of this Regulation, provided that a pre-conditioning procedure described in point 4.6 of that Annex is performed.