Art. 12 Regulation (EU) 2025/1707

Requirements for emission type-approval

In forcesince 5 Sep 2025
1.

The manufacturer applying for an emission type-approval under Regulation (EU) 2024/1257 shall provide the granting type-approval authority with a declaration of compliance with this Regulation using the format set out in Appendix 1 to Annex III. The declaration shall be submitted to the granting type-approval authority that receives the type-approval application under Commission Implementing Regulation (EU) 2025/1706 [Commission Implementing Regulation (EU) 2025/1706 of 25 July 2025 laying down rules, procedures and testing methodologies for the application of Regulation (EU) 2024/1257 as regards exhaust and evaporative emission type-approval of vehicles of categories M1 and N1 and amending Implementing Regulation (EU) 2020/683 (OJ L, 2025/1706, 5.9.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/1706/oj).].

2.

Before the manufacturer receives the emission type-approval according to Article 3 of Implementing Regulation (EU) 2025/1706, the granting type-approval authority shall request a simple demonstration of the functioning of the OBM system that follows the steps and the form set out in Appendix 2 to Annex III.

3.

The granting type-approval authority shall acknowledge receipt of the declaration referred to in paragraph 1. The granting type-approval authority shall add the completed declaration and its attachments to the information package that is made available to other type-approval authorities. The granting type-approval authority shall ensure that the relevant information is added to the test report under Appendix 8a of Annex I of Implementing Regulation (EU) 2025/1706. According to Article 34 of Regulation (EU) 2018/858, a revision or an extension of the type-approvals linked to the aforementioned test report shall not be necessary in case of an update of declaration of compliance under Annex III of this Regulation.

4.

The declaration referred to in paragraph 1 shall be updated when new vehicles are added to the scope of the declaration. Such updates to this declaration shall not require a new demonstration as referred to in paragraph 2. The granting type-approval authority shall apply paragraph 3 to every updated declaration.