Sufficient information to enable the identification of starting substances, compositions and constituents and characterisation of nanoforms shall be generated, including the information set out in the Table. If it is not technically possible or if it does not appear scientifically necessary to give information on one or more of the items referred to in the table, the reasons shall be clearly stated.
Starting substance for organic materials/organic cementitious constituents | Composition of metallic materials | Composition of enamels, ceramic, or other inorganic materials
Standard information and testing |
1.1. | Name or any other identifier: |
1.1.1. | | Name in the International Union of Pure and Applied Chemistry (IUPAC) nomenclature and/or other international chemical names, if available. | |
1.1.2. | | Other names (e.g., usual name, trade name, abbreviation) (if available).
1.1.3. | | European Inventory of Existing Commercial Chemical Substances (Einecs), European List of Notified Chemical Substances (Elincs) or No-Longer Polymer (NLP) number, or the number assigned by ECHA under Regulation (EC) No 1907/2006, if available. | European Inventory of Existing Commercial Chemical Substances (Einecs), European List of Notified Chemical Substances (Elincs) or the number assigned by the Agency under Regulation (EC) 1907/2006, if available.
1.1.4. | | Chemical Abstracts Service (CAS) name and CAS number, if available. |
1.1.5. | | European Union Positive List number, if available. | European Union Positive List number, if available. | European Union Positive List number, if available.
1.1.6. | | |
Designation:
Standardised material designation number under European standard EN 1412, if available;
Standardised material designation symbol under international standard ISO 1190-1, if available.
Name of material category and name of enamel, ceramic or other inorganic composition.
1.1.7. | | | Identity of existing metallic composition category that the composition belongs to. |
1.1.8. | | | Identity and designation of new metallic composition category that the composition belongs to. |
1.1.9. | | | Identity of metal constituents of the new metallic composition category and corresponding concentration ranges (minimum and maximum % w/w). |
1.1.10. | | | Identity of metal impurities of the new metallic composition category present above 0,02 % w/w concentration in the composition and corresponding maximum percentage by mass (% w/w). |
1.1.11. | | | Identity of metal constituents of the reference material for the new metallic composition category and corresponding concentration ranges (minimum and maximum % w/w). |
1.1.12. | | | Identity of metal impurities of the reference material for the new metallic composition category that are present above 0,02 % w/w concentration in the composition and their corresponding concentration ranges (minimum and maximum, % w/w). |
1.2. | Information related to molecular and structural formula or crystal structure: |
1.2.1. | | Molecular formula and structural formula (including IUPAC International Chemical Identifier (InChI), Simplified Molecular Input Line Entry System (SMILES) notation and other representation, if available). | Description of crystal structures, including crystalline phases, if available.. | Description of crystal structures, including crystalline phases, if available..
1.2.2. | | Information on optical activity and typical ratio of (stereo)isomers, if available. | |
1.2.3. | | Molecular weight or molecular weight range, if available. | |
1.3. | Chemical characterisation. Where it covers a nanoform, this nanoform shall be characterised pursuant to point 1.4.: |
1.3.1. | | Degree of purity (%), i.e., typical concentration and concentration range (in percentage, minimum and maximum) of substance constituents. | |
1.3.2. | | Names (EC, CAS numbers, and other identifiers, if available) of substance constituents present above 0,02 % w/w concentration in the formulation and at concentration ≥ 0,1 % w/w in the substance (taking into account information submitted under points 1.1.1, 1.1.2 and 1.1.3 above and Table 1, point 2.4.1 of Annex II). For each of these, typical concentration and concentration range (minimum and maximum % w/w). | Names (and other identifiers e.g. EC, CAS numbers) of constituents of the composition, i.e., the elements in any form (e.g., bound or unbound) and corresponding concentration ranges (minimum and maximum % w/w). | Names (and other identifiers e.g. EC, CAS numbers) of constituents of the composition, i.e., the elements in any form (e.g., bound or unbound) and corresponding concentration ranges (minimum and maximum % w/w).
1.3.3. | |
Names (and other identifiers e.g. EC, CAS numbers) of impurities present above 0,02 % w/w concentration in the formulation of the final material and at concentration ≥ 0,1 % w/w in the substance (taking into account information submitted under points 2.4.1. and 2.4.2. of Table 1 of Annex II).
For each of these, typical concentration and concentration range (minimum and maximum % w/w).
Names (and other identifiers e.g. EC, CAS numbers) of impurities present above 0,02 % w/w concentration in the composition and corresponding maximum percentage by weight (% w/w). |
Names (and other identifiers e.g. EC, CAS numbers) of impurities, other than cadmium (Cd) and lead (Pb) present above 0,02 % w/w concentration in the composition and corresponding maximum percentage by weight (% w/w);
Information on the maximum percentage by weight (% w/w) for cadmium (Cd) and lead (Pb).
1.3.4. | | All necessary qualitative and quantitative analytical data specific for the identification of the substance, such as ultraviolet, infra-red, nuclear magnetic resonance, mass spectrum, chromatographic, titrimetric, elemental analysis and/or diffraction data. | All necessary qualitative and quantitative analytical data specific for the identification of the composition and constituents of the composition, such as elemental analysis, Inductively Coupled Plasma Mass Spectrometry, Atomic Absorption Spectroscopy, Ion Chromatography, titrimetric and/or diffraction data (e.g., X-Ray Fluorescence (XRF) or X-Ray Powder Diffraction (XRD).
1.3.5. | | Description of the analytical methods or the appropriate bibliographical references that are necessary for the identification of the starting substance, organic cementitious constituent (including the identification and quantification of impurities and substance constituents), metallic composition constituent, and enamel, ceramic, or other inorganic composition constituent. The description shall consist of the experimental protocols followed and the relevant interpretation of the results reported under points 1.3.1. to 1.3.4. This information shall be sufficient to allow the methods to be reproduced.
1.4. | Characterisation of a nanoform: |
1.4.1. | | Names or other identifiers of the nanoform of the starting substance or organic cementitious constituent, if applicable. | |
1.4.2. | | Number based particle size distribution with indication of the number fraction of nanoform particles in the size range 1 nm – 100 nm. | |
1.4.3. | | Description of surface functionalisation or treatment and identification of each agent including IUPAC name and CAS or EC number. | |
1.4.4. | | Shape, aspect ratio and other morphological characterisation: crystallinity, information on assembly structure, including e.g., shell like structures or hollow structures, if available. | |
1.4.5. | | Surface area (specific surface area by volume, specific surface area by mass or both). | |
1.4.6. | | Description of the analytical methods or the appropriate bibliographical references for the information elements in point 1.4. This information shall be sufficient to allow the methods to be reproduced. | |
1.5. | Additional information required for starting substances and organic cementitious constituents which are (a) polymers or (b) pre-polymers: |
1.5.1. | | Name (and other identifiers e.g. EC, CAS numbers) of monomers and other reactants from which the substance is produced. | |
1.5.2. | | Manufacturing process description (including information on the use of monomers and reactants as well as their ratio). | |
1.5.3. | | Additives to the (pre-)polymer. | |
1.5.4. | | Structure information of the (pre-)polymer. | |
1.5.5. | | Molecular mass distribution; test report of the molecular mass distribution is required. | |
1.5.6. | | Number averaged molecular mass. | |
1.5.7. | | Molecular mass range (minimum and maximum). | |
1.5.8. | | Identities of the substance constituents with molecular weight < 1000 Da and their percentage by weight (% w/w). | |
1.5.9. | | Residual monomers and their concentrations (%). | |
1.5.10. | | Viscosity | |
1.5.11. | | Melt flow index | |