2 Appendix 9 Determination of reference work and reference CO2 mass for engine types for which the applicable type-approval test cycle is solely a Non-Road Steady-State Cycle (NRSC), Regulation (EU) 2022/2387

In forcesince 30 Aug 2022

The reference work and reference mass of CO2 for ISM groups A and C are taken from hot-start NRTC run of the type-approval test of the parent engine, and for ISM group H from the LSI-NRTC type-approval test of the parent engine, as set out in point 2.1.2 of Appendix 5. This Appendix defines how to determine the reference work and reference mass of CO2 for engine types in all ISM groups except A, C and H.

For the purpose of this Appendix the applicable laboratory test cycle shall be the discrete-mode NRSC or RMC NRSC for the corresponding engine (sub-)category set out in tables IV-1 and IV-2, and tables IV-5 to IV-10 of Annex IV to Regulation (EU) 2016/1628.

2.1. The reference work Wref,kWh, is equal to the actual work Wact,kWh, as given by Section 2.4.1.1 of Annex VII to Delegated Regulation (EU) 2017/654 on technical and general requirements.

2.2. The reference mass of CO2, mCO2,ref, g, is equal to the mass of CO2 for the laboratory test cycle mCO2, g, calculated in accordance with one of Sections 2.1.2, 2.2.1, 3.5.1 or 3.6.1 of Annex VII to Delegated Regulation (EU) 2017/654 on technical and general requirements according to whether raw or dilute gaseous sampling is used and whether mass-based or molar-based calculation is applied.

3.1. The reference work Wref, kWh shall be calculated using equation 9-1.

Wref

Nmodei1

Pi•WFi•

tref

3600

(9-1)

Where:

Piis the engine power for mode i, kW, with Pi = Pm,i + PAUX (see Sections 6.3 and 7.7.1.3 of Annex VI to Delegated Regulation (EU) 2017/654 on technical and general requirements);

WFiis the weighting factor for the mode i [-];

trefis the reference time, s, (see table);

Wrefis the reference cycle work emitted by the parent engine on the reference laboratory test cycle, kWh;

iis the mode number;

Nmodeis the total number of modes in the test cycle.

3.2. The reference mass of CO2 mCO2,ref, kg, shall be determined from the mean CO2 mass flow rate qmCO2,i, g/h, for each mode i calculated in accordance with Sections 2 or 3 of Annex VII to Delegated Regulation (EU) 2017/654 on technical and general requirements using equation 9-2.

mCO2,ref

Nmodei1

qmCO2,i•WFi•

tref

3600

(9-2)

Where:

qmCO2,iis the mean CO2 mass flow rate for mode i, g/h;

WFiis the weighting factor for the mode i [-];

trefis the reference time, s, (see table);

mCO2,refis the reference mass of CO2 emitted by the parent engine on the reference laboratory test cycle, g;

iis the mode number;

Nmodeis the total number of modes in the test cycle

3.3. Reference time tref is the total duration of the equivalent Ramped Modal Cycle (RMC) set out in Appendix 2 to Annex XVII to Delegated Regulation (EU) 2017/654 on technical and general requirements. Those values are set out in table.

NRSC | tref [s]

C1 | 1800

C2 | 1800

D2 | 1200

E2 | 1200

E3 | 1200

F | 1200

G1 | 1800

G2 | 1800

H | 1200