Recital 6, Regulation (EU) 2022/1616

In forcesince 15 Sep 2022

Regulation (EU) No 10/2011 requires that substances used to manufacture plastic materials and articles are of a suitable purity, and that remaining impurities can be identified so that they can be subject to risk assessment. As single substances can be purified to a level suitable to this purpose, it does not generally limit production methods for the substances on the Union list of authorised substances. It is thus also possible to manufacture those substances from any source, including therefore from waste materials. Moreover, substances produced from waste and that are obtained at a high level of purity are indistinguishable from the same substances produced otherwise. Therefore the manufacture of plastic materials and articles with substances obtained at a high level of purity from waste materials, and that are included in the Union list established by Regulation (EU) No 10/2011, or subject to certain derogations, should be subject to that Regulation, whereas other substances in which incidental contaminants cannot be assumed a priori to be absent or be easily excluded, including mixtures, oligomers, and polymers produced from waste should be subject to this Regulation. To avoid uncertainty over which Regulation applies to a certain recycling technology that results in substances at an intermediate recycling stage, substances subject to Regulation (EU) No 10/2011 should be clearly excluded from the scope of this Regulation.