However, rules should be laid down to ensure that recycled plastic materials and articles produced with novel technologies are of minimal risk and that the possibility to place such materials and articles on the market is effectively used to collect the information and experience allowing for the evaluation of the technology. Therefore, prior to the placing on the market of these recycled material and articles, all available information on the principles, concepts and practices used by the novel technology should be used to minimise risks, and data on the decontamination efficiency of the technology should be available. Where this data would be insufficient to verify the adequate functioning of the technology, particularly when decontamination is not the main or only principle used to achieve safety, complementary tests should be designed based on the specifics of the novel technology. Furthermore, to establish the level of contamination in the input materials, as well as of the residual contaminant levels in the final materials and articles and the potential of their transfer to food, rules should be laid down concerning, in particular, the analytical monitoring of recycled plastic materials and articles produced with recycling technologies under development and the potential presence of hazardous substances. To characterise exposure risk, such monitoring should not only focus on average levels, but also assess matters such as whether certain contaminants are frequently occur in different batches or are linked to a particular source. Moreover, to ensure trust, public knowledge and regulatory scrutiny of technologies that are being developed, it is important that the reports on the safety of the materials and of such monitoring are made public.
Recital 22, Regulation (EU) 2022/1616
In forcesince 15 Sep 2022