Recital 33, Regulation (EU) 2022/1616

In forcesince 15 Sep 2022

Among those recycling technologies that fall within the scope of this Regulation and that are not listed as suitable recycling technologies, the manufacture of recycled plastic materials and articles in which the recycled plastic is used behind a plastic functional barrier, requires special consideration because several hundred recycling installations would presently already manufacture recycled plastic materials and articles with this technology. Recycled plastic materials and articles manufactured with this technology have been so far been placed on the market assuming compliance with Regulation (EC) No 10/2011, and subject to the control of national competent authorities. The present information on these materials does not dispel doubts over their actual compliance with that Regulation. In particular there is insufficient information available on the ability of the applied functional barriers to prevent migration to food of contaminants contained in the recycled plastic over an extended period of time. Therefore, this technology should not be established as a suitable recycling technology yet. However, unlike other technologies to be considered as novel for the purposes of this Regulation, the main principles of this technology are already understood. This allows to lay down specific adaptations to the rules on novel technologies concerning the use of this technology until a decision is taken on its suitability, and in particular to add a requirement to verify the effectiveness of the barrier principle. Therefore, while on the one hand, given the number of existing installations, it does not appear necessary to require the monitoring of all these recycling installations in order to obtain sufficient data on contamination levels, on the other hand, given that, on the basis of the already available knowledge, there are doubts as to the ability of the functional barriers to prevent migration of contaminants on the long term, it is appropriate to subject the placing on the market of recycled plastic materials and articles manufactured with this technology to the condition that additional testing has been carried out to guarantee that ability.