To calculate the emissions from the extraction or cultivation of raw materials Part C, point 5 of Annex V and Part B, point 5 of Annex VI to Directive (EU) 2018/2001 state that the calculation shall include the sum of all emissions from the extraction or cultivation process itself; from the collection, drying and storage of raw materials; from waste and leakages; and from the production of chemicals or products used in extraction or cultivation.
The capture of CO2 in the cultivation of raw materials shall be excluded. Estimates of emissions from agriculture biomass cultivation may be derived from the use of regional averages for cultivation emissions included in the reports referred to in Article 31(4) of Directive (EU) 2018/2001 or the information on the disaggregated default values for cultivation emissions included in this Annex, as an alternative to using actual values. In the absence of relevant information in those reports, averages can be calculated based on local farming practices, for instance on data of a group of farms, as an alternative to using actual values.
The emissions from the extraction or cultivation process itself shall include all emissions from (i) the provision of the fuels for farm machinery used; (ii) the production of seeding material for crop cultivation; (iii) the production of fertilisers and pesticides; (iv) fertiliser acidification and liming application; and (v) soil emissions from crop cultivation.
The GHG emissions from crop cultivation (field preparation, seeding, fertiliser and pesticide application, harvesting, collection) shall include all emissions from the use of fuels (such as diesel oil, gasoline, heavy fuel oil, biofuels or other fuels) in farm machinery. The amount of fuel use in farm machinery shall be duly documented. Appropriate emission factors of the fuels must be used in accordance with Annex IX. Where biofuels are used, the default GHG emissions set out in Directive (EU) 2018/2001 must be used.
The emissions from the use of chemical fertilisers and pesticides [‘Pesticides’ means all plant protection products, including herbicides, insecticides, fungicides, etc.] for the cultivation of raw materials shall include all related emissions from the manufacture of chemical fertilisers and pesticides. The amount of the chemical fertilisers and pesticides, depending on the crop, local conditions and farming practices, shall be duly documented. Appropriate emission factors, including upstream emissions, must be used to account for the emissions from the production of chemical fertilisers and pesticides pursuant to Annex IX. If the economic operator knows the factory producing the fertiliser and it falls under the EU Emissions Trading System (ETS), then the economic operator can use the production emissions declared under ETS, adding the upstream emissions for natural gas etc. Transport of the fertilisers shall also be included, using the emissions from transport modes listed in Annex IX. If the economic operator does not know the factory supplying the fertiliser, it should use the standard values provided for in Annex IX.
The calculation of cultivation emissions from the production of seeding material for crop cultivation shall be based on actual data on the seeding material used. Emission factors for the production and supply of seeding material can be used to account for emissions associated with the production of seeds. The standard values for emission factors set out in Annex IX must be used. For other seeds, literature values from the following hierarchy must be used.
version 5 of JEC-WTW report;
ECOINVENT database;
‘official’ sources, such as Intergovernmental Panel on Climate Change (IPCC), International Energy Agency (IEA) or governments;
other reviewed sources of data, such as E3 database, GEMIS database;
peer-reviewed publications;
duly documented own estimates.
The emissions from the neutralisation of fertiliser acidification and application of aglime shall account for the CO2 emissions from neutralisation of acidity from nitrogen fertilisers or from aglime reactions in the soil.
The emissions resulting from acidification caused by nitrogen fertiliser use in the field shall be accounted for in the emission calculation, based on the amount of nitrogen fertilisers used. For nitrate fertilisers, the emissions from the neutralisation of nitrogen fertilisers in the soil shall be 0,806 kg CO2/kg N; for urea fertilisers, the neutralisation emissions shall be 0,783 kg CO2/kg N.
The real amount of aglime used shall be duly documented. Emissions shall be calculated as follows:
On acid soils, where pH is less than 6,4, aglime is dissolved by soil acids to form predominantly CO2 rather than bicarbonate, releasing almost all of the CO2 into the aglime (0,44 kg CO2/kg CaCO3 equivalent aglime).
If soil pH is greater or equal to 6,4, an emission factor of 0,98/12,44 = 0,079 kg CO2/(kg CaCO3-equivalent) aglime applied shall be taken into account in the calculation, in addition to the emissions due to the neutralisation of acidification caused by the fertiliser.
The liming emissions calculated from actual lime use, calculated in points 1 and 2 above, may be greater than the fertilizer neutralization emissions calculated in 1.4.1 if the fertilizer acidification was neutralized by the applied lime. In such a case, the fertilizer neutralization emissions (in 1.4.1) may be subtracted from the calculated liming emissions to avoid that its emissions are counted twice.
The emissions from fertilizer acidification may exceed those attributed to liming. In such a case, the subtraction would result in apparently negative net liming emissions because not all of the fertilizer-acidity is neutralized by aglime but also partly by naturally-occurring carbonates. In this case, the net liming emissions shall be counted zero, but the fertilizer-acidification emissions that occur anyway shall be maintained in line with section 1.4.1.
If data on actual aglime use is not available, the aglime use recommended by the Agricultural Lime Association shall be assumed. This shall be a function of the type of crop, measured soil pH, soil type and type of liming material. The accompanying CO2 emissions shall be calculated using points 1 and 2 of the procedure above. However, the subtraction specified in point 3 shall not be applied in this case, since the recommended use of aglime does not include aglime used to neutralize fertilizer applied in the same year, so there is no possible double counting of fertilizer neutralization emissions.
The calculation of N2O emissions from managed soils shall follow the IPCC methodology. The use of disaggregated crop-specific emission factors for different environmental conditions (corresponding to Tier 2 of the IPCC methodology) shall be used to calculate the N2O emissions resulting from crop cultivation. Specific emission factors for different environmental conditions, soil conditions and different crops should be taken into account. Economic operators could use validated models to calculate those emission factors provided that the models take these aspects into account. In line with the IPCC guidelines [IPCC (2006), Vol. 4, Chapter 11: N2O emissions from managed soils, and CO2 emissions from lime and urea application.], both direct and indirect N2O emissions shall be taken into account. The GNOC tool shall be used, which is based on the formulas below, following the naming conventions in the IPCC (2006) guidelines:
Ntotal – N = N2Odirect – N 2O+ N2Oindirect – N
Where:
For mineral soils: NDirect – N = [(FSN 2O+ F1ij] ON) • EF+ [FCR • EF1]
For organic soils: N2ODirect – N = [(F + F1] ON) • EF+ [FF1] CR • E+ [(F2CG, Temp] OS,CG,Temp • EF+ [FCROS,CG,Trop • E2CG,Trop]
For both mineral and organic soils: N2ODirect – N = [((FGASF) SN • Frac+ (FGASM) • EF4] ON • Erac+ [(F+F+ FCR) • FracLeach-(H) • EF5]
It must be calculated for:
sugar beet, sugar cane according to IPCC (2006) Vol. 4 Chapter 11 Eq. 11.6, not considering below-ground residues and with the addition of N input from vignasse and filter cake in the case of sugar cane;
FBurnt • Cf) • [RAG • NAG • (1 – FracRemove)] CR = Yield • DRY • (1-Frac+ FVF
coconut and oil palm plantations applying a fixed N input based on literature as IPCC (2006) provides no default calculation method for standard emission factors, pursuant to Annex IX;
for all other crops according to IPCC (2006) Vol. 4 Chapter 11 Eq. 11.7a 11.11, 11.12, as
FBurnt • Cf) • AGDM • NAG • (1-FracRemove) CR = (1-Frac+ (AG+ Yield • DRY) • RBG-BIO • NBG
Where:
N2Ototal – Ndirect and indirect annual N2O–N emissions produced from managed soils; kg N2O–N ha-1 a-1
N2Odirect – Nannual direct N2O–N emissions produced from managed soils; kg N2O–N ha-1 a-1
N2Oindirect – Nannual indirect N2O–N emissions (that is to say, the annual amount of N2O–N produced from atmospheric deposition of N volatilised from managed soils and annual amount of N2O–N produced from leaching and run-off of N additions to managed soils in regions where leaching/run-off occurs); kg N2O–N ha-1 a-1
FSNannual synthetic nitrogen fertiliser input; kg N ha-1 a-1
FONannual animal manure N applied as fertiliser; kg N ha-1 a-1
FCRannual amount of N in crop residues (above ground and below ground); kg N ha-1 a-1
FOS,CG,Tempannual area of managed/drained organic soils under cropland in temperate climate; ha-1 a-1
FOS,CG,Tropannual area of managed/drained organic soils under cropland in tropical climate; ha-1
FracGASF0,10 (kg N NH3–N + NOx–N) (kg N applied)-1. Volatilisation from synthetic fertiliser
FracGASM0,20 (kg N NH3–N + NOx–N) (kg N applied)-1. Volatilisation from all organic nitrogen fertilisers applied
FracLeach-(H)0,30 kg N (kg N additions) -1. N losses by leaching/run-off for regions where leaching/run-off occurs
EF1ijCrop and site-specific emission factors for N2O emissions from synthetic fertiliser and organic N application to mineral soils (kg N2O–N (kg N input)-1);
EF10,01 [kg N2O–N (kg N input) -1]
EF2CG,Temp8 kg N ha-1 a-1 for temperate organic crop and grassland soils
EF2CG,Trop16 kg N ha-1 a-1 for tropical organic crop and grassland soils
EF40,01 [kg N2O–N (kg N NH3–N + NOx–N volatilised) -1]
EF50,0075 [kg N2O–N (kg N leaching/run-off) -1]
Yieldannual fresh yield of the crop (kg ha-1)
DRYdry matter fraction of harvested product [kg d.m. (kg fresh weight)-1] (see Table 1)
FracBurntFraction of crop area burnt annually [ha (ha)-1]
CfCombustion factor [dimensionless] (see Table 1)
RAGRatio of above-ground residues, dry matter to harvested dry matter yield, for the crop [kg d.m. (kg d.m.)-1] (see Table 3)
NAGN content of above-ground residues [kg N (kg d.m.)-1] (see Table 1)
FracRemoveFraction of above-ground residues removed from field [kg d.m. (kg AGDM)-1]
FVFAnnual amount of N in sugar cane vignasse and filter cake returned to the field [kg N ha-1], calculated as Yield * 0,000508.
AGAbove-ground residue dry matter [kg d.m. ha-1]
N2O emissions from soils under agricultural use, in different agricultural fields under different environmental conditions and agricultural land use classes can be determined following the Stehfest and Bouwman (2006) statistical model (hereinafter referred to as ‘the S&B model’):
Where:
EN2O emission (in kg N2O-N ha-1 a-1)
eveffect value for different drivers (see Table 2)
The EF1ij for the biofuel crop i at location j is calculated (S&B model) as:
EF1ij = (Efert,ij – Eunfert,ij)/Nappl,ij
The IPCC (2006) factor (EF1) for direct N2O emissions from fertiliser input based on a global mean shall be replaced by the crop- and site-specific EF1ij for direct emissions from mineral fertiliser and manure N input, based on the crop- and site-specific EF1ij, applying the S&B model.
Where:
Efert,ijN2O emission (in kg N2O-N ha-1 a-1) based on S&B, where the fertiliser input is the actual N application rate (mineral fertiliser and manure) to the crop i at location j
Eunfert,ijN2O emission of the crop i at location j (in kg N2O-N ha-1 a-1) based on S&B. The N application rate is set to 0, all the other parameters are kept the same.
Nappl,ijN input from mineral fertiliser and manure (in kg N ha-1 a-1) to the crop i at location j
Emissions from the collection, drying and storage of raw materials include all emissions related to fuel use in the collection, drying and storage of raw materials.
Emissions from the collection of raw materials include all the emissions resulting from the collection of raw materials and their transport to storage. The emissions are calculated using appropriate emission factors for the type of fuel used (diesel oil, gasoline, heavy fuel oil, biofuels or other fuels).
The cultivation emissions shall include emissions from drying before storage as well as from storage and handling of biomass feedstock. Data on energy use for drying before storage shall include actual data on the drying process used to comply with the requirements of storage, depending on the biomass type, particle size, moisture content, weather conditions, etc. Appropriate emission factors, including upstream emissions, shall be used to account for the emissions from the use of fuels to produce heat or electricity used for drying. Emissions for drying include only emissions for the drying process needed to ensure adequate storage of raw materials and does not include drying of materials during processing.
When accounting for the consumption of electricity not produced within the fuel production plant, the GHG emissions intensity of the produced and distributed electricity shall be assumed to be equal to the average emission intensity of the produced and distributed electricity in a defined region, which can be at a NUTS2 [Nomenclature of territorial units for statistics.] region or a national level. In case national electric emission coefficients are used, the values from Annex IX shall be used. By way of derogation from this rule, producers may use an average value for an individual electricity production plant for electricity produced by that plant if it is not connected to the electricity grid and sufficient information are available to derive an emission factor.