Regulation (EU) 2019/2021 is amended as follows:
Article 1(2) is amended as follows:
point (g) is replaced by the following:
‘(g) electronic displays that are components or sub-assemblies as defined in point 2 of Article 2 of Directive 2009/125/EC;’;
the following point (h) is added:
‘(h) industrial displays.’;
Article 2 is amended as follows:
point (15) is replaced by the following:
‘(15) “professional display” means an electronic display designed and marketed for professional use for editing video and graphic images. Its specification shall include all of the following features:
contrast ratio of at least 1000:1 measured at a perpendicular to the vertical plane of the screen and at least 60:1 measured at a horizontal viewing angle of at least 85° relative to that perpendicular and at least 83° from the perpendicular on a curved screen, with or without a screen cover glass;
native resolution of at least 2,3 mega pixels;
colour Gamut support greater or equal to 38,4 % of CIE LUV;
colour and luminance uniformity as specified for grade 1, 2 or 3 monitors in EBU Tech. 3320, as applicable to the professional application of the display.’;
the following point (21) is added:
‘(21) “industrial display” means an electronic display exclusively designed, tested and marketed for use in industrial environments for measuring, testing, monitoring or control. Its design must provide at least all the following:
operating temperatures between 0 °C and +50 °C;
operating humidity conditions between 20 % and 90 % non-condensing;
minimum level of ingress protection (IP 65) ensuring no ingress of dust and complete protection against contact (dust-tight) with no effect for water projected by a nozzle (6,3 mm) against the enclosure;
EMC immunity suitable for industrial environments.’;
in Article 4, paragraph 2 is replaced by the following:
‘2. For the purposes of conformity assessment pursuant to Article 8 of Directive 2009/125/EC, the technical documentation shall contain the reason why certain, if any, plastic parts are not marked as per the exemption set out in point D(2) of Annex II, and the details and results of the calculations set out in Annexes II and III to this Regulation.’;
in Article 6, the second and third paragraphs are replaced by the following:
‘The energy consumption of the product and any of the other declared parameters shall not deteriorate after a software or firmware update when measured with the same test standard originally used for the declaration of conformity, except with explicit consent of the end-user prior to the update. No performance change shall occur as a result of rejecting the update.
A software update shall never have the effect of changing the product's performance in a way that makes it non-compliant with the ecodesign requirements applicable for the declaration of conformity.’;
the following Article 12 is added:
If no unit belonging to the same model or equivalent models was placed on the market before 1 November 2020, the units of models placed on the market between 1 November 2020 and 28 February 2021 which comply with the provisions of this regulation shall be considered compliant with the requirements of Regulation (EC) No 642/2009.’;
Annexes I to IV are amended and Annex IIIa is added as set out in Annex V to this Regulation.