Art. 4 Regulation (EU) 2021/341

Amendments to Regulation (EU) 2019/2020

In forcesince 23 Feb 2021

Regulation (EU) 2019/2020 is amended as follows:

(1)

in Article 2, point 4 is replaced by the following:

‘(4) “containing product” means a product containing one or more light sources, or separate control gears, or both, including, but not limited to, luminaires that can be taken apart to allow separate verification of the contained light source(s), household appliances containing light source(s), furniture (shelves, mirrors, display cabinets) containing light source(s).’;

(2)

in Article 4(1), the second subparagraph is replaced by the following:

‘Manufacturers, importers or authorised representatives of containing products shall ensure that light sources and separate control gears can be removed without being permanently damaged for verification purposes by market surveillance authorities. The technical documentation shall provide instructions on how to do this.’;

(3)

Article 7 is replaced by the following:

The manufacturer, importer or authorised representative shall not place on the market products designed to be able to detect they are being tested (for example, by recognising the test conditions or test cycle) and to react specifically by automatically altering their performance during the test with the aim of reaching a more favourable level for any of the parameters in the technical documentation or included in any documentation provided.

The energy consumption of the product and any of the other declared parameters shall not deteriorate after a software or firmware update when measured with the same test standard originally used for the declaration of conformity, except with explicit consent of the end-user prior to the update. No performance change shall occur as a result of rejecting the update.

A software update shall never have the effect of changing the product's performance in a way that makes it non-compliant with the ecodesign requirements applicable for the declaration of conformity.’;

(4)

the following Article 12 is added:

If no unit belonging to the same model or equivalent models was placed on the market before 1 July 2021, the units of models placed on the market between 1 July 2021 and 31 August 2021 which comply with the provisions of this regulation shall be considered compliant with the requirements of Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012.’;

(5)

Annexes I to IV are amended as set out in Annex IV to this Regulation.