1.1. Pursuant to point 1(b) of Article 3, the supplier shall enter into the product database the information as set out in Table 3, including when the light source is a part in a containing product.
[changes to these items shall not be considered relevant for the purposes of point 4 of Article 4 of Regulation (EU) 2017/1369.] [if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.] [‘-’: not applicable; ‘yes’: an equivalence claim involving the power of a replaced light source type may be given only: for directional light sources, if the light source type is listed in Table 4 and if the luminous flux of the light source in a 90° cone (Φ90°) is not lower than the corresponding reference luminous flux in Table 4. The reference luminous flux shall be multiplied by the correction factor in Table 5. For LED light sources, it shall be in addition multiplied by the correction factor in Table 6, for non-directional light sources, the claimed equivalent incandescent light source power (in watt, rounded to the integer) shall be that corresponding in Table 7 to the luminous flux of the light source. The intermediate values of both the luminous flux and the claimed equivalent light source power (in watt, rounded to the integer) shall be calculated by linear interpolation between the two adjacent values.] [‘-’: not applicable; ‘yes’: Claim that a LED light source replaces a fluorescent light source without integrated ballast of a particular wattage. This claim may be made only if: the luminous intensity in any direction around the tube axis does not deviate by more than 25 % from the average luminous intensity around the tube,and the luminous flux of the LED light source is not lower than the luminous flux of the fluorescent light source of the claimed wattage. The luminous flux of the fluorescent light source shall be obtained by multiplying the claimed wattage with the minimum luminous efficacy value corresponding to the fluorescent light source in Table 8, and the wattage of the LED light source is not higher than the wattage of the fluorescent light source it is claimed to replace. The technical documentation file shall provide the data to support such claims.] [this item shall not be considered relevant for the purpose of Article 2(6) of Regulation (EU) 2017/1369.]
Supplier’s name or trade mark,:
Supplier’s address,:
Model identifier:
Type of light source:
Lighting technology used: | [HL/LFL T5 HE/LFL T5 HO/CFLni/other FL/HPS/MH/other HID/LED/OLED/mixed/other] | Non-directional or directional: | [NDLS/DLS]
Light source cap-type
(or other electric interface)
[free text] | |
Mains or non-mains: | [MLS/NMLS] | Connected light source (CLS): | [yes/no]
Colour-tuneable light source: | [yes/no] | Envelope: | [no/second/non-clear]
High luminance light source: | [yes/no] | |
Anti-glare shield: | [yes/no] | Dimmable: | [yes/only with specific dimmers/no]
Product parameters
Parameter | Value | Parameter | Value
General product parameters:
Energy consumption in on-mode (kWh/1 000 h), rounded up to the nearest integer | x | Energy efficiency class | [A/B/C/D/E/F/G]
Useful luminous flux (Φuse), indicating if it refers to the flux in a sphere (360°), in a wide cone (120°) or in a narrow cone (90°) | x in [sphere/wide cone/narrow cone] | Correlated colour temperature, rounded to the nearest 100 K, or the range of correlated colour temperatures, rounded to the nearest 100 K, that can be set | [x/x…x/x or x (or x…)]
On-mode power (Pon), expressed in W | x,x | Standby power (Psb), expressed in W and rounded to the second decimal | x,xx
Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal | x,xx | Colour rendering index, rounded to the nearest integer, or the range of CRI-values that can be set | [x/x…x]
Outer dimensions,
without separate control gear, lighting control parts and non-lighting control parts, if any (millimetre)
Height | x | Spectral power distribution in the range 250 nm to 800 nm, at full-load | [graphic]
Width | x
Depth | x
Claim of equivalent power | [yes/-] | If yes, equivalent power (W) | x
Chromaticity coordinates (x and y) |
0,xxx
0,xxx
Parameters for directional light sources:
Peak luminous intensity (cd) | x | Beam angle in degrees, or the range of beam angles that can be set | [x/x…x]
Parameters for LED and OLED light sources:
R9 colour rendering index value | x | Survival factor | x,xx
the lumen maintenance factor | x,xx | |
Parameters for LED and OLED mains light sources:
displacement factor (cos φ1) | x,xx | Colour consistency in McAdam ellipses | x
Claims that an LED light source replaces a fluorescent light source without integrated ballast of a particular wattage. | [yes/-] | If yes then replacement claim (W) | x
Flicker metric (Pst LM) | x,x | Stroboscopic effect metric (SVM) | x,x
Extra-low voltage reflector type
Type | Power (W) | Reference Φ90° (lm)
MR11 GU4 | 20 | 160
35 | 300
MR16 GU 5.3 | 20 | 180
35 | 300
50 | 540
AR111 | 35 | 250
50 | 390
75 | 640
100 | 785
Mains-voltage blown glass reflector type
Type | Power (W) | Reference Φ90° (lm)
R50/NR50 | 25 | 90
40 | 170
R63/NR63 | 40 | 180
60 | 300
R80/NR80 | 60 | 300
75 | 350
100 | 580
R95/NR95 | 75 | 350
100 | 540
R125 | 100 | 580
150 | 1000
Mains-voltage pressed glass reflector type
Type | Power (W) | Reference Φ90° (lm)
PAR16 | 20 | 90
25 | 125
35 | 200
50 | 300
PAR20 | 35 | 200
50 | 300
75 | 500
PAR25 | 50 | 350
75 | 550
PAR30S | 50 | 350
75 | 550
100 | 750
PAR36 | 50 | 350
75 | 550
100 | 720
PAR38 | 60 | 400
75 | 555
80 | 600
100 | 760
120 | 900
Light source type | Luminous flux multiplication factor
Halogen light sources | 1
Fluorescent light sources | 1,08
LED light sources |
1 + 0,5 × (1 - LLMF)
where LLMF is the lumen maintenance factor at the end of the declared lifetime
LED light source beam angle | Luminous flux multiplication factor
≤ beam angle | 1
≤ beam angle < 20° | 0,9
≤ beam angle < 15° | 0,85
beam angle < 10° | 0,80
Light source luminous flux Φ (lm) | Claimed equivalent incandescent light source power (W)
136 | 15
249 | 25
470 | 40
806 | 60
1055 | 75
1521 | 100
2452 | 150
3452 | 200
T8 (26 mm Ø) |
T5 (16 mm Ø)
High Efficiency
T5 (16 mm Ø)
High Output
Claimed equivalent power (W) | Minimum luminous efficacy (lm/W) | Claimed equivalent power (W) | Minimum luminous efficacy (lm/W) | Claimed equivalent power (W) | Minimum luminous efficacy (lm/W)
15 | 63 | 14 | 86 | 24 | 73
18 | 75 | 21 | 90 | 39 | 79
25 | 76 | 28 | 93 | 49 | 88
30 | 80 | 35 | 94 | 54 | 82
36 | 93 | | | 80 | 77
38 | 87 | | | |
58 | 90 | | | |
70 | 89 | | | |
For light sources that can be tuned to emit light at full-load with different characteristics, the values of parameters that vary with these characteristics shall be reported at the reference control settings.
If the light source is no longer placed on the EU market, the supplier shall put in the product database the date (month, year) when the placing on the EU market stopped.
If a light source is placed on the market as a part in a containing product, the technical documentation for the containing product shall clearly identify the contained light source(s), including the energy efficiency class.
If a light source is placed on the market as a part in a containing product, the following text shall be displayed, clearly legible, in the user manual or booklet of instructions:
‘This product contains a light source of energy efficiency class <X>’,
where <X> shall be replaced by the energy efficiency class of the contained light source.
If the product contains more than one light source, the sentence can be in the plural, or repeated per light source, as suitable.
The reference control settings, and instructions on how they can be implemented, where applicable;
Instructions on how to remove lighting control parts and/or non-lighting parts, if any, or how to switch them off or minimize their power consumption;
If the light source is dimmable: a list of dimmers it is compatible with, and the light source — dimmer compatibility standard(s) it is compliant with, if any;
If the light source contains mercury: instructions on how to clean up the debris in case of accidental breakage;
Recommendations on how to dispose of the light source at the end of its life in line with Directive 2012/19/EU of the European Parliament and of the Council [Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) (OJ L 197, 24.7.2012, p. 38).].
For the light sources specified in point 3 of Annex IV, their intended use shall be stated on all forms of packaging, product information and advertisement, together with a clear indication that the light source is not intended for use in other applications.
The technical documentation file drawn up for the purposes of conformity assessment, in accordance with paragraph 3 of Article 3 of Regulation (EU) 2017/1369 shall list the technical parameters that make the product design specific to qualify for the exemption.