2 Appendix 11 AES Documentation Package, Regulation (EU) 2019/1939

In forcesince 7 Nov 2019

The AES documentation package shall include the following:

(A) information on all AES:

(a)

a declaration of the manufacturer that the engine system or engine family type approved as a separate technical unit, or the vehicle with an approved engine system with regard to emissions, or an vehicle type approved with regard to emissions, does not contain any defeat strategy;

(b)

a description of the engine and the emission control strategies and devices employed, whether software or hardware, and any condition(s) under which the strategies and devices will not operate as they do during testing for Type Approval;

(c)

a declaration of the software versions used to control the AES/BES, including the appropriate checksums of these software versions and instructions to the authority on how to read the checksums; the declaration shall be updated and sent to the approval authority that holds this documentation package each time there is a new software version that has an impact to the AES/BES;

(d)

detailed technical reasoning of any AES including a risk assessment estimating the risk with and without the AES, and including the following:

(i)

information on the hardware element(s) that need to be protected by the AES, where applicable;

(ii)

proof of sudden and irreparable engine damage that cannot be prevented by regular maintenance and would occur in the absence of the AES, where applicable;

(iii)

a reasoned explanation on why there is a need to use an AES upon engine starting or warm up, where applicable;

(e)

a description of the fuel system control logic, timing strategies and switch points during all modes of operation;

(f)

a description of the hierarchical relations among the AES (i.e., when more than one AES can be active concurrently, an indication of which AES is primary in responding, the method by which strategies interact, including data flow diagrams and decision logic and how does the hierarchy assure emissions from all AES are controlled to the lowest practical level;

(g)

a list of parameters which are measured and/or calculated by the AES, along with the purpose of every parameter measured and/or calculated and how each of those parameters relates to engine damage; including the method of calculation and how well these calculated parameters correlate with the true state of the parameter being controlled and any resulting tolerance or factor of safety incorporated into the analysis;

(h)

a list of engine/emission control parameters which are modulated as a function of the measured or calculated parameter(s) and the range of modulation for each engine/emission control parameter; along with the relationship between engine/emission control parameters and measured or calculated parameters;

(i)

an evaluation of how the AES will control real-driving emissions to the lowest practical level, including a detailed analysis of the expected increase of total regulated pollutants and CO2 emissions by using the AES, compared to the BES;

The AES documentation package shall be limited to 100 pages and shall include all the main elements to allow the approval authority to assess the AES (according to the requirements of Annex VI, appendix 2), the effectiveness of the inducement system and the anti-tampering measures. The package may be complemented with annexes and other attached documents, containing additional and complementary elements, if necessary. The manufacturer shall send a new version of the AES documentation package to the approval authority every time changes are introduced to the AES. The new version shall be limited to the changes and their effect. The new version of the AES shall be evaluated and approved by the approval authority.

The AES documentation package shall be structured as follows:

Parts | paragraph | point | Explanation

Introduction documents | | Introduction letter to TAA | Reference of the document with the version, the date of issuing the document, signature by the relevant person in the manufacturer organisation

Versioning table | Content of each version modifications: and with part is modified

Description of the (emission) types concerned |

Attached documents table | List of all attached documents

Cross references | Link to paragraph (a) to (i) of Appendix 11 (where to find each requirement of the regulation)

Absence of defeat device declaration | + Signature

Core document | 0 | Acronyms/abbreviations |

1 | GENERAL DESCRIPTION |

1.1 | Engine general presentation | Description of main characteristics: displacement, after treatment,…

1.2 | General system architecture | System bloc diagram: list of sensors and actuators, explanation of engine general functions

1.3 | Reading of software and calibration version | E.g. scan-tool explanation

2 | Base Emission Strategies |

2.x | BES x | Description of strategy x

2.y | BES y | Description of strategy y

3 | Auxiliary Emission Strategies |

3.0 | Presentation of the AESs | Hierarchical relations among AES: description and justification (e.g. safety, reliability, etc.)

3.x | AES x |

3.x.1 AES justification

3.x.2 measured and/or modelled parameters for AES characterization

3.x.3 Action mode of AES — Parameters used

3.x.4 Effect of AES on pollutants and CO2

3.y | AES y |

3.y.1

3.y.2

etc.

4.

| Description of the inducement system, including the associated monitoring strategies |

5.

| Description of the anti-tampering measures |

100 page limit ends here

Annex | | List of types covered by this BES-AES: including Type Approval reference, software reference, calibration number, checksums of each version and of each electronic control unit (engine and/or after-treatment if any)

Attached documents | | Technical note for AES justification n°xxx | Risk assessment or justification by testing or example of sudden damage, if any

Technical note for AES justification n°yyy |

Test report for specific AES impact quantification | Test report of all specific tests done for AES justification, test conditions details, description of the vehicle/date of the tests emission/CO2 impact with/without AES activation