Annex IX to Regulation (EU) 2017/2400 is amended as follows:
point 1 is amended as follows:
in the second paragraph below the title, the introductory sentence is replaced by the following:
‘The power consumption of the following auxiliaries shall be considered within the simulation tool by using technology specific average standard power values:’;
the last paragraph is replaced by the following:
‘The standard values are integrated in the simulation tool and automatically used by choosing the corresponding technology.’;
in point 2, point (17) is replaced by the following:
‘(17) “Electric steering pump” means a hydraulic pump driven by an electric motor;’;
point 3.2 is amended as follows:
Table 2 is replaced by the following:
Identification of vehicle configuration | | Steering power consumption P [W]
Number of axles | Axle configuration | Chassis configuration | Technically permissible maximum laden mass (tons) | Vehicle group | Long haul | Regional delivery | Urban delivery | Municipal utility | Construction
U+F | B | S | U + F | B | S | U + F | B | S | U + F | B | S | U + F | B | S
2 | 4 × 2 | Rigid lorry + (Tractor) | > 7,5 - 10 | 1 | | | | 240 | 20 | 20 | 220 | 20 | 30 | | | | | |
Rigid lorry + (Tractor) | > 10 - 12 | 2 | 340 | 30 | 0 | 290 | 30 | 20 | 260 | 20 | 30 | | | | | |
Rigid lorry + (Tractor) | > 12 - 16 | 3 | | | | 310 | 30 | 30 | 280 | 30 | 40 | | | | | |
Rigid lorry | > 16 | 4 | 510 | 100 | 0 | 490 | 40 | 40 | 430 | 40 | 50 | 430 | 30 | 50 | 580 | 30 | 70
Tractor | > 16 | 5 | 600 | 120 | 0 | 540 | 90 | 40 | | | | | | | 640 | 50 | 80
4 × 4 | Rigid lorry | > 7,5 - 16 | 6 | —
Rigid lorry | > 16 | 7 | —
Tractor | > 16 | 8 | —
3 | 6 × 2/2 – 4 | Rigid lorry | all | 9 | 600 | 120 | 0 | 490 | 60 | 40 | 440 | 50 | 50 | 430 | 30 | 50 | 640 | 50 | 80
Tractor | all | 10 | 450 | 120 | 0 | 440 | 90 | 40 | | | | | | | 640 | 50 | 80
6 × 4 | Rigid lorry | all | 11 | 600 | 120 | 0 | 490 | 60 | 40 | | | | 430 | 30 | 50 | 640 | 50 | 80
Tractor | all | 12 | 450 | 120 | 0 | 440 | 90 | 40 | | | | | | | 640 | 50 | 80
6 × 6 | Rigid lorry | all | 13 | —
Tractor | all | 14
4 | 8 × 2 | Rigid lorry | all | 15 | —
8 × 4 | Rigid lorry | all | 16 | | | | | | | | | | | | | 640 | 50 | 80
8 × 6/8 × 8 | Rigid lorry | all | 17 | —
where:
UUnloaded – pumping oil without steering pressure demand
FFriction – friction in the pump
BBanking – steer correction due to banking of the road or side wind
SSteering – steer pump power demand due to cornering and manoeuvring.’;
the third paragraph is replaced by the following:
‘If a new technology is not listed, the technology “fixed displacement” shall be considered in the simulation tool.’;
in point 3.3, the third paragraph is replaced by the following:
‘If the technology used in the vehicle is not listed, the technology “standard alternator” shall be considered in the simulation tool.’;
in point 3.5, Table 9 is replaced by the following:
Identification of vehicle configuration | | AC power consumption [W]
Number of axles | Axle configuration | Chassis configuration | Technically permissible maximum laden mass (tons) | Vehicle group | Long haul | Regional delivery | Urban delivery | Municipal utility | Construction
2 | 4 × 2 | Rigid lorry + (Tractor) | > 7,5 - 10 | 1 | | 150 | 150 | |
Rigid lorry + (Tractor) | > 10 - 12 | 2 | 200 | 200 | 150 | |
Rigid lorry + (Tractor) | > 12 - 16 | 3 | | 200 | 150 | |
Rigid lorry | > 16 | 4 | 350 | 200 | 150 | 300 | 200
Tractor | > 16 | 5 | 350 | 200 | | | 200
4 × 4 | Rigid lorry | > 7,5 - 16 | 6 | —
Rigid lorry | > 16 | 7 | —
Tractor | > 16 | 8 | —
3 | 6 × 2/2 – 4 | Rigid lorry | all | 9 | 350 | 200 | 150 | 300 | 200
Tractor | all | 10 | 350 | 200 | | | 200
6 × 4 | Rigid lorry | all | 11 | 350 | 200 | | 300 | 200
Tractor | all | 12 | 350 | 200 | | | 200
6 × 6 | Rigid lorry | all | 13 | —
Tractor | all | 14
4 | 8 × 2 | Rigid lorry | all | 15 | —
8 × 4 | Rigid lorry | all | 16 | | | | | 200
8 × 6/8 × 8 | Rigid lorry | all | 17 | —’
in point 3.6, in the paragraph below the title, the third sentence is replaced by the following:
‘Application related power consumptions at engaged PTO are added by the simulation tool and are not described in the following.’.