Annex X to Regulation (EU) 2017/2400 is amended as follows:
point 3.4.1 is replaced by the following:
‘3.4.1. The tyre shall be clearly identifiable in respect to the certificate covering it for the corresponding rolling resistance coefficient.’;
in point 3.4.2, the first sentence is replaced by the following:
‘The tyre manufacturer shall use the markings affixed to the side wall of the tyre or affix an additional identifier to the tyre.’;
Appendix 1 is replaced by the following:
‘’;
Appendix 2 is amended as follows:
SECTION I is amended as follows:
points 0.14 and 0.16 are deleted;
SECTION II is amended as follows:
point 4 is replaced by the following:
‘4. Date of test report:’;
point 8.4 is replaced by the following:
‘8.4. Alignment equation:’;
the following point is inserted:
‘8.5. Rolling resistance level of the tyre (in N/kN rounded to the first decimal place, in accordance with ISO80000-1 Appendix B, section B.3, rule B (example 1)) Cr,aligned … [N/kN]’;
Appendix 3 is amended as follows:
the title is replaced by the following:
in Definitions, point (1) is replaced by the following:
‘(1)“Parameter ID”Unique identifier as used in the simulation tool for a specific input parameter or set of input data’;
in Table 1, the third row ‘TechnicalReportId’ below the title and the last row are replaced by the following:
‘CertificationNumber | P232 | token | |
Dimension | P108 | string | [-] | Allowed values (non-exhaustive): “9.00 R20”, “9 R22.5”, “9.5 R17.5”, “10 R17.5”, “10 R22.5”, “10.00 R20”, “11 R22.5”, “11.00 R20”, “11.00 R22.5”, “12 R22.5”, “12.00 R20”, “12.00 R24”, “12.5 R20”, “13 R22.5”, “14.00 R20”, “14.5 R20”, “16.00 R20”, “205/75 R17.5”, “215/75 R17.5”, “225/70 R17.5”, “225/75 R17.5”, “235/75 R17.5”, “245/70 R17.5”, “245/70 R19.5”, “255/70 R22.5”, “265/70 R17.5”, “265/70 R19.5”, “275/70 R22.5”, “275/80 R22.5”, “285/60 R22.5”, “285/70 R19.5”, “295/55 R22.5”, “295/60 R22.5”, “295/80 R22.5”, “305/60 R22.5”, “305/70 R19.5”, “305/70 R22.5”, “305/75 R24.5”, “315/45 R22.5”, “315/60 R22.5”, “315/70 R22.5”, “315/80 R22.5”, “325/95 R24”, “335/80 R20”, “355/50 R22.5”, “365/70 R22.5”, “365/80 R20”, “365/85 R20”, “375/45 R22.5”, “375/50 R22.5”, “375/90 R22.5”, “385/55 R22.5”, “385/65 R22.5”, “395/85 R20”, “425/65 R22.5”, “495/45 R22.5”, “525/65 R20.5”’
in Appendix 4, point 2.1 is replaced by the following:
‘1.1. Certification number for tyres shall comprise the following:
eX*YYYY/YYYY*ZZZZ/ZZZZ*T*0000*00
Section 1 | Section 2 | Section 3 | Additional letter to section 3 | Section 4 | Section 5
Indication of country issuing the certificate | HDV CO2 certification Regulation (2017/2400) | Latest amending Regulation (ZZZZ/ZZZZ) | T = Tyre | Base certification number 0000 | Extension 00’