1.1.
This Appendix sets out the in-use performance ratio of a specific monitor M of the OBD systems (IUPR M) requirements for L3e, L5e-A, and L7e-A vehicles type approved in accordance with this Regulation.
2.1.
At the request of the approval authority, the manufacturer shall report to the type-approval authority on warranty claims, warranty repair works and OBD faults recorded at servicing, according to a format agreed at type-approval. The information shall detail the frequency and substance of faults for emissions-related components and systems. The reports shall be filed at least once in the vehicle's production cycle, for each vehicle model for the duration of 5 years of age or the distance as laid down in Annex VII(A) to Regulation (EU) No 168/2013, whichever is sooner.
For defining the IUPR family the OBD family parameters listed in Appendix 5 shall be used.
An audit of IUPR M will be conducted by the approval authority on the basis of information supplied by the manufacturer. Such information shall include in particular, the following:
2.3.1. The name and address of the manufacturer;
2.3.2. The name, address, telephone and fax numbers and e-mail address of his authorised representative within the areas covered by the manufacturer's information;
2.3.3. The model name(s) of the vehicles included in the manufacturer's information;
2.3.4. Where appropriate, the list of vehicle types covered within the manufacturer's information, i.e. for OBD and IUPR M, the OBD family in accordance with Appendix 5;
2.3.5. The vehicle identification number (VIN) codes applicable to these vehicle types within the family (VIN prefix);
2.3.6. The numbers of the type-approvals applicable to these vehicle types within the IUPR family, including, where applicable, the numbers of all extensions and field fixes/recalls (re-works);
2.3.7. Details of extensions, field fixes/recalls to those type-approvals for the vehicles covered within the manufacturer's information (if requested by the approval authority);
2.3.8. The period of time over which the manufacturer's information was collected;
2.3.9. The vehicle build period covered within the manufacturer's information (e.g. vehicles manufactured during the 2017 calendar year);
2.3.10. The manufacturer's IUPR M checking procedure, including:
vehicle location method;
vehicle selection and rejection criteria;
test types and procedures used for the programme;
the manufacturer's acceptance/rejection criteria for the family group;
geographical area(s) within which the manufacturer has collected information;
sample size and sampling plan used.
2.3.11. The results from the manufacturer's IUPR M procedure, including:
identification of the vehicles included in the programme (whether tested or not). The identification shall include the following:
model name;
vehicle identification number (VIN);
region of use (where known
date of manufacture.
the reason(s) for rejecting a vehicle from the sample:
test data, including the following:
date of test/download;
location of test/download;
all data, as required in accordance with point 4.1.6. of Appendix 1, downloaded from the vehicle;
for each monitor to be reported the in-use-performance ratio.
2.3.12. For IUPR M sampling, the following:
the average of in-use-performance ratios IUPR M of all selected vehicles for each monitor in accordance with point 4.1.4. of Appendix 1.
The percentage of selected vehicles, which have an IUPR M greater or equal to the minimum value applicable to the monitor in accordance with point 4.1.4. of Appendix 1.
3.1.
The manufacturer's sampling shall be drawn from at least two Member States with substantially different vehicle operating conditions (unless only made available on the market in one Member State). Factors such as differences in fuels, ambient conditions, average road speeds, and urban/highway driving split shall be taken into consideration in the selection of the Member States.
For IUPR M testing, only vehicles fulfilling the criteria of point 2.3 of Appendix 4 shall be included in the test sample.
3.2.
In selecting the Member States for sampling vehicles, the manufacturer may select vehicles from a Member State that is considered to be particularly representative. In this case, the manufacturer shall demonstrate to the approval authority which granted the type approval that the selection is representative (e.g. by the market having the largest annual sales of a vehicle family within the Union). When a family requires more than one sample lot to be tested as defined in point 3.3, the vehicles in the second and third sample lots shall reflect different vehicle operating conditions from those selected for the first sample.
3.3.1.
The number of sample lots shall depend on the annual sales volume of an OBD family in the Union, as defined in the following table:
EU registrations
per calendar year (for tailpipe emissions tests)
of vehicles of an OBD family with IUPR in the sampling period
Number of sample lots
up to 100000 | 1
100001 to 200000 | 2
above 200000 | 3
3.3.2.
For IUPR, the number of sample lots to be taken is described in the table in point 3.3.1. and is based on the number of vehicles of an IUPR family that are approved with IUPR
For the first sampling period of an IUPR family, all of the vehicle types in the family that are approved with IUPR shall be considered to be subject to sampling. For subsequent sampling periods, only vehicle types which have not been previously tested or are covered by emissions approvals that have been extended since the previous sampling period shall be considered to be subject to sampling.
For families consisting of fewer than 5000 EU registrations that are subject to sampling within the sampling period the minimum number of vehicles in a sample lot is six. For all other families, the minimum number of vehicles in a sample lot to be sampled is fifteen.
Each sample lot shall adequately represent the sales pattern, i.e. at least high volume vehicle types (≥ 20 % of the family total) shall be represented.
Vehicles of small series productions with less than 1000 vehicles per OBD family are exempted from minimum IUPR requirements as well as the requirement to demonstrate these to the type approval authority.
4.
On the basis of the audit referred to in Section 2 the approval authority shall adopt one of the following decisions and actions:
decide that the IUPR family is satisfactory and not take any further action;
decide that the data provided by the manufacturer is insufficient to reach a decision and request additional information or test data from the manufacturer;
decide that based on data from the approval authority or Member State surveillance testing programmes, that information provided by the manufacturer is insufficient to reach a decision and request additional information or test data from the manufacturer;
decide that the outcome of the audit for the IUPR family is unsatisfactory and proceed to have such vehicle type or IUPR family tested in accordance with Appendix 1.
If according to the IUPR M audit the test criteria of point 3.2. of Appendix 4 are met for the vehicles in a sample lot, the type-approval authority must take the further action described in point (d) of this point.
4.1.
The approval authority, in cooperation with the manufacturer, shall select a sample of vehicles with sufficient mileage whose use under normal conditions can be reasonably assured. The manufacturer shall be consulted on the choice of the vehicles in the sample and allowed to attend the confirmatory checks of the vehicles.