Licence forms shall be made up in sets containing copy No 1, copy No 2 and the application, together with any extra copies of the licence, in that order.
However, the licence issuing authority may require applicants to complete an application form only, instead of the sets provided for in the first subparagraph.
Where, as a result of a Union measure, the quantity for which the licence is issued may be less than the quantity in respect of which application for a licence was initially made, the quantity applied for and the amount of the security relating thereto must be entered only on the application form.
Forms for extracts of licences shall be made up in sets containing copy No 1 and copy No 2, in that order.
In Section 2 the Member State issuing the document shall be indicated using the corresponding country code. The licence issuing authority may add numbers identifying the document.
Member State | Country code
Belgium | BE
Bulgaria | BG
Czech Republic | CZ
Denmark | DK
Germany | DE
Estonia | EE
Ireland | IE
Greece | EL
Spain | ES
France | FR
Croatia | HR
Italy | IT
Cyprus | CY
Latvia | LV
Lithuania | LT
Luxembourg | LU
Hungary | HU
Malta | MT
Netherlands | NL
Austria | AT
Poland | PL
Portugal | PT
Romania | RO
Slovenia | SI
Slovakia | SK
Finland | FI
Sweden | SE
United Kingdom | UK
At the time of their issue, licences and extracts may bear an issue number in Section 23 (export licence) or Section 25 (import licence) allocated by the licence issuing authority.
Applications, licences and extracts shall be completed in typescript or by computerised means.
The licence issuing authority may allow applications to be handwritten in ink and in block capitals.
The ELAN1L-AGRIM and ELAN1L-AGREX data models lay down the information necessary for licence issuing authorities to issue import and export licences in accordance with the applicable Union legislation.
Each entry in import licences following the ELAN1L-AGRIM data model shall use the format indicated in the instructions published in the C series of the Official Journal of the European Union.
Import licences issued in accordance with the ELAN1L-AGRIM data model shall always indicate the following data:
the entry ‘EUROPEAN UNION – Import licence AGRIM’ in Section ‘Document type’;
the licence number in Section ‘Licence number’ and, only for extracts, the licence number of the parent licence in Section ‘Parent licence number’;
if, according to the relevant Union rules, a pre-condition for issuing the licence is the existence of a document issued by third countries, the number of such document shall be indicated in Section ‘TCDOC number’;
if the licence is issued for a tariff quota, the number of the tariff quota shall be indicated in Section ‘TRQ number’ using the format ‘09.4xxx’;
the code of the authority issuing the licence;
the EORI number of the titular holder of the licence;
the EORI number of the transferee, if the licence or extract is transferred, and the date of validation of the transfer;
in case of transfer back, and subsequent new transfer, the Section ‘Transferee’ shall show the data of the last transfer. All transfers and transfers back shall be shown in the dedicated Section on the third page of the licence;
data concerning previous transfers and transfers back, in particular the date of validation of the transfer back/transfer, as well as the data on the economic operators from which and to which the licence or extract has been transferred, shall be shown on the third page of the licence;
if required by the relevant Union rules, the ISO 3166-1 alpha-2 code of:
the third country from where the products have been transported in Section ‘Exporting country’;
the third country of origin of the products in Section ‘Country of origin’;
the third country or countries from which imports are not allowed under the specific tariff quota in Section ‘Excluded origins’;
if the licence is issued for one of the tariff quotas with order number 09.4120, 09.4121 and 09.4122, the ISO 3166-1 alpha-2 code of Spain or Portugal shall be indicated in Section ‘Destination’, in accordance with the relevant Union legislation;
Section ‘Product. Trade denomination’ shall be completed in accordance with the instructions published in the C series of the Official Journal of the European Union;
the product list shall be indicated as follows:
the product code shall be indicated in Section ‘Product list. CN code’ in accordance with the instructions published in the C series of the Official Journal of the European Union;
Section ‘Product list. Description in accordance with the Combined Nomenclature’ shall indicate the description of the product that, according to the relevant Union rules, corresponds to the code indicated in subpoint (i);
the quantity shall be indicated according to the instructions published in the C series of the Official Journal of the European Union;
Section ‘Tolerance’ shall be completed with the tolerance applicable to the products in accordance with the relevant Union rules;
if so required by the relevant Union rules, Section ‘Special conditions/special particulars’ shall indicate one or more of the codes indicated in the following table:
ELAN Code | Meaning of the code | Licences for which this entry shall be indicated in Section ‘Special conditions / special particulars’
SC01 | Replacement licence or extract of a lost or destroyed licence or extract | Licences issued in accordance with Article 15 of Implementing Regulation (EU) 2016/1239
SUG01 | Sugar intended for refining |
Licences issued for tariff quotas with order numbers:
09.4317, 09.4318, 09.4354, 09.4355, 09.4319, 09.4320, 09.4329, 09.4330.
SUG02 | WTO concessions sugar imported in accordance with Title III, Chapter 3, of Implementing Regulation (EU) 2020/761. |
Licences issued for tariff quotas with order number:
09.4317, 09.4318, 09.4354, 09.4355, 09.4319, 09.4320, 09.4321, 09.4329, 09.4330.
SUG03 | Application of Implementing Regulation (EU) 2020/761, Balkans sugar. |
Licences issued for tariff quotas with order number:
09.4324, 09.4325, 09.4326, 09.4327.
MI01 | Valid only if accompanied by the TCDOC – subtype IMA 1 certificate – with the number indicated in Section ‘TCDOC number’ |
Licences issued for tariff quotas with order number:
09.4521, 09.4522.
MI02 | Valid only if accompanied by the TCDOC – subtype certificate of eligibility – with the number indicated in Section ‘TCDOC number’ | Licences issued for tariff quotas with order number: 09.4518, 09.4519, 09.4520.
SP01 | Preferential arrangements applicable to the quantity specified in Section ‘Total quantity’ | Applicable to all import licences issued for tariff quotas referred to in Article 5(5), second subparagraph, of Delegated Regulation (EU) 2016/1237.
SP02 | In-quota duty applicable to the quantity specified in Section ‘Total quantity’ | Applicable to import licences issued for products subject to an import licence listed in Part I of the Annex to Delegated Regulation (EU) 2016/1237.
SP03 | Article 3(4) of Regulation (EEC, Euratom) No 1182/71 shall not apply | Applicable to all import licences issued for tariff quotas.
HE01 | Variety of hemp indicated in free text | Applicable to licences issued for imports of hempseeds for sowing (CN code ex12079920)
HE02 | Seeds of varieties of hemp, for sowing, falling within CN code ex12079920 are accompanied by proof that the tetrahydrocannabinol content of the variety concerned does not exceed that laid down in accordance with Article 4(4), second subparagraph, and Article 4(8) of Regulation (EU) 2021/2115 of the European Parliament and of the Council | Applicable to licences issued for imports of hempseeds for sowing (CN code ex12079920)
HE03 | Hempseeds other than for sowing, falling within CN code 12079991 are imported by an importer approved by the Member State | Applicable to licences issued for imports of hempseeds other than for sowing (CN code 12079991)
HE04 | True hemp, raw or retted, falling within CN code 53021000 fulfils the conditions laid down in Article 4(4), second subparagraph, and Article 4(8) of Regulation (EU) 2021/2115 | Applicable to licences issued for imports of hemp (CN code 53021000)
BA01 | Basmati rice falling within CN code 10062017 or 10062098 and imported at a zero rate of duty under the relevant Union legislation, accompanied by the authenticity certificate with the number indicated in Section ‘TCDOC number’ | Applicable to all import licences for basmati rice with CN codes 10062017 and 10062098
the licence shall indicate the date of issuance, and the first and last day of validity in the relevant Sections;
Section ‘Signature’ shall be completed with the signature of any official of the issuing authority issuing the document with the right to sign licences, and the stamp of that authority. The signature and the stamp shall have the format provided by the national rules applicable in the issuing Member State;
if the licence or extract is produced during the unavailability of ELAN, Section ‘To complete only in case of temporary unavailability’ shall be filled in with the applicable entry laid down in Section 3 of Implementing Regulation (EU) 2025/1272.
The following data may be indicated in import licences:
the name and address of the issuing authority;
the name and address of the titular holder;
the name and address of the transferee, if the licence or extract is transferred;
the name of the organisation issuing the document in Section ‘Licence issuing authority’;
the name of the person signing it in Section ‘Issued on’;
the date of signature, in Section ‘Signature’.
Quantity attributions on licences or extracts shall be indicated as follows:
for the purpose of the first attribution, enter in box 1 of Section ‘Quantity in figures’ the quantity indicated in Section ‘Total quantity’ of the licence, increased by the permitted tolerance, using the same unit of measurement indicated on the licence;
in Section ‘Customs document/extract number’ shall be indicated the type and number of the customs document and the date of acceptance of the customs declaration which is the date of attribution. In case of attribution for the creation of an extract, the section mentioned above shall indicate the number of the extract and the date of issue of the extract;
in the case of attribution relating to the issue of an extract, the quantity to be entered is that for which the extract is issued, plus any tolerance;
in Section ‘Customs reference number, signature, stamp of the attributing authority’ customs authorities shall indicate reference number identifying the customs office, the Member State, the signature of the official and the stamp of the authority.
Attributions
Quantity in figures | Product code – Unit of Measurement | Customs document / Extract number | Customs reference number, signature, stamp of the attributing authority
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
Special particulars / special conditions
Code | Text
Free text
Transfers/Transfers back
Transferred to – EORI | Transferred to – Name | Date of transfer | Date of transfer back
Extension of validity
Date of operation | CN code | Quantity | UoM | Valid until
1 | | | | |
2 | | | | |
3 | | | | |
Each entry in export licences following the ELAN1L-AGREX data model shall use the format indicated in the instructions published in the C series of the Official Journal of the European Union.
Export licences issued in accordance with the ELAN1L-AGREX data model shall always indicate the following data:
the entry ‘AGREX’ in Section ‘Document type’;
the licence number in Section ‘Licence number’ and, only for extracts, the licence number of the parent licence in Section ‘Parent licence number’;
the code of the issuing authority;
the EORI number of the titular holder of the licence;
the ISO 3166-1 alpha-2 code of the third country of destination in Section ‘Receiving country’;
Section ‘Product. Trade denomination’ shall be completed in accordance with the instructions published in the C series of the Official Journal of the European Union;
the quantity for which the licence is issued, in Section ‘Total quantity’;
the code of the unit of measurement in Section ‘Unit of measurement’;
the product list shall be indicated as follows:
the product code shall be indicated in Section ‘Product list. CN code’ in accordance with the instructions published in the C series of the Official Journal of the European Union;
Section ‘Product list. Description in accordance with the Combined Nomenclature’ shall indicate the description of the product that, according to the relevant Union rules, corresponds to the code indicated in subpoint (1);
the quantity shall be indicated according to the instructions published in the C series of the Official Journal of the European Union;
Section ‘Tolerance’ shall be completed with the tolerance applicable to the products in accordance with the relevant Union rules;
if so required by the relevant Union rules, Section ‘Special conditions/special particulars’ shall indicate one or more of the codes indicated in the following table:
ELAN Code | Meaning of the code | Licences for which this entry shall be indicated in Section ‘Special conditions / special particulars’
CA01 | Cheeses for direct export to Canada. Article 64 of Implementing Regulation (EU) 2020/761 | For some export licences for the quota for cheese to Canada, in accordance with Article 64(4) of Implementing Regulation (EU) 2020/761
CA02 | Cheeses for export directly/via New York to Canada. Article 64 of Implementing Regulation (EU) 2020/761 | For some export licences for the quota for cheese to Canada, in accordance with Article 64(4) of Implementing Regulation (EU) 2020/761
CA03 | Without export refund | For all export licences for the quota for cheese to Canada
US01 | The license is valid for all the products falling under Heading 0406 of the CN | For all export licences for the quota for cheese to the United States of America
SP03 | Article 3(4) of Regulation (EEC, Euratom) No 1182/71 shall not apply | Applicable to all export licences issued for tariff quotas.
the licence shall indicate the date of issuance, and the first and last day of validity in the relevant Sections.
The following data may be indicated in export licences:
the name and address of the issuing authority in Section ‘Licence issuing authority’;
the name and address of the titular holder in the relevant Section;
the name of the person signing it in Section ‘‘Issued on’;
the date of signature, in Section ‘Signature’.
Quantity attributions on licences or extracts shall follow the same rules indicated in Part A.1 of this Annex.
Attributions
Quantity in figures | Product code – Unit of Measurement | Customs document / Extract number | Customs reference number, signature, stamp of the attributing authority
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
1 | Code | |
2 | UoM | Date
Special particulars / special conditions
Code | Text
Free text
Extension of validity
Date of operation | CN code | Quantity | UoM | Valid until
1 | | | | |
2 | | | | |
3 | | | | |