By way of derogation from Article 5, substances other than those included in the Union list may be used as polymer production aids in the manufacture of plastic materials and articles subject to national law.
By way of derogation from Article 5, colorants and solvents may be used in the manufacture of plastic materials and articles subject to national law.
The following substances not included in the Union list are authorised subject to the rules set out in Articles 8, 9, 10, 11 and 12:
all salts of substances for which ‘yes’ is indicated in column 2 in Table 1 of Annex II of authorised acids, phenols or alcohols, and subject to the restrictions set out in column 3 and 4 of that table;
mixtures obtained by mixing authorised substances without a chemical reaction of the components;
when used as additives, natural or synthetic polymeric substances of a molecular weight of at least 1000 Da, except macromolecules obtained from microbial fermentation, complying with the requirements of this Regulation, if they are capable of functioning as the main structural component of final materials or articles;
when used as monomer or other starting substance, pre-polymers and natural or synthetic macromolecular substances, as well as their mixtures, except macromolecules obtained from microbial fermentation, if the monomers or starting substances required to synthesise them are included in the Union list.
The following substances not included in the Union list may be present in plastic materials or articles:
non-intentionally added substances;
aids to polymerisation.
By way of derogation from Article 5, substances with a biocidal function used in biocidal products that may be made available on the Union market in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council [Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (OJ L 167, 27.6.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/528/oj).] for product-type 4 for use that covers incorporation into plastic materials and articles which may enter into contact with food, may be used as additives in the manufacturing of plastic materials and articles.
By way of derogation from Article 5, 2,2-bis(4-hydroxyphenyl)propane (‘bisphenol A’ or ‘BPA’) (CAS No 80-05-7) and other hazardous bisphenols or hazardous bisphenol derivatives as defined and falling within the scope of Regulation (EU) 2024/3190 may only be used in the manufacture of plastic materials and articles in accordance with that Regulation.