26 PROTOCOL 3, Decision_act (EU) 2007/855

In force

Concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation for the application of the provisions of this agreement between the community and Montenegro

TABLE OF CONTENTS

TITLE I | GENERAL PROVISIONS

Article 1 | Definitions

TITLE II | DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’

Article 2 | General requirements

Article 3 | Cumulation in the Community

Article 4 | Cumulation in Montenegro

Article 5 | Wholly obtained products

Article 6 | Sufficiently worked or processed products

Article 7 | Insufficient working or processing

Article 8 | Unit of qualification

Article 9 | Accessories, spare parts and tools

Article 10 | Sets

Article 11 | Neutral elements

TITLE III | TERRITORIAL REQUIREMENTS

Article 12 | Principle of territoriality

Article 13 | Direct transport

Article 14 | Exhibitions

TITLE IV | DRAWBACK OR EXEMPTION

Article 15 | Prohibition of drawback of, or exemption from, customs duties

TITLE V | PROOF OF ORIGIN

Article 16 | General requirements

Article 17 | Procedure for the issue of a movement certificate EUR.1

Article 18 | Movement certificates EUR.1 issued retrospectively

Article 19 | Issue of a duplicate movement certificate EUR.1

Article 20 | Issue of movement certificates EUR.1 on the basis of a proof of origin issued or made out previously

Article 21 | Accounting segregation

Article 22 | Conditions for making out an invoice declaration

Article 23 | Approved exporter

Article 24 | Validity of proof of origin

Article 25 | Submission of proof of origin

Article 26 | Importation by instalments

Article 27 | Exemptions from proof of origin

Article 28 | Supporting documents

Article 29 | Preservation of proof of origin and supporting documents

Article 30 | Discrepancies and formal errors

Article 31 | Amounts expressed in euro

TITLE VI | ARRANGEMENTS FOR ADMINISTRATIVE COOPERATION

Article 32 | Mutual assistance

Article 33 | Verification of proofs of origin

Article 34 | Dispute settlement

Article 35 | Penalties

Article 36 | Free zones

TITLE VII | CEUTA AND MELILLA

Article 37 | Application of this Protocol

Article 38 | Special conditions

TITLE VIII | FINAL PROVISIONS

Article 39 | Amendments to this Protocol

LIST OF ANNEXES

Annex I: | Introductory notes to the list in Annex II

Annex II: | List of working or processing required to be carried out on non-originating materials in order that the product manufactured can obtain originating status

Annex III: | Specimens of movement certificate EUR.1 and application for a movement certificate EUR.1

Annex IV: | Text of the invoice declaration

Annex V: | Products excluded from the cumulation provided for in Article 3 and Article 4

JOINT DECLARATIONS

Joint declaration concerning the Principality of Andorra

Joint declaration concerning the Republic of San Marino

TITLE I

GENERAL PROVISIONS

Article 1

Definitions

For the purposes of this Protocol:

(a)

‘manufacture’ means any kind of working or processing including assembly or specific operations;

(b)

‘material’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product;

(c)

‘product’ means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(d)

‘goods’ means both materials and products;

(e)

‘customs value’ means the value as determined in accordance with the 1994 Agreement on implementation of Article VII of the General Agreement on Tariffs and Trade (WTO Agreement on customs valuation);

(f)

‘ex-works price’ means the price paid for the product ex works to the manufacturer in the Community or in Montenegro in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;

(g)

‘value of materials’ means the customs value at the time of importation of the non originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the Community or in Montenegro;

(h)

‘value of originating materials’ means the value of such materials as defined in (g) applied mutatis mutandis;

(i)

‘value added’ shall be taken to be the ex-works price minus the customs value of each of the materials incorporated which originate in the other countries referred to in Articles 3 and 4 or, where the customs value is not known or cannot be ascertained, the first ascertainable price paid for the materials in the Community or in Montenegro;

(j)

‘chapters’ and ‘headings’ mean the chapters and the headings (four digit codes) used in the nomenclature which makes up the Harmonised Commodity Description and Coding System, referred to in this Protocol as ‘the Harmonised System’ or ‘HS’;

(k)

‘classified’ refers to the classification of a product or material under a particular heading;

(l)

‘consignment’ means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(m)

‘territories’ includes territorial waters.

TITLE II

DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’

Article 2

General requirements

1.

For the purpose of implementing this Agreement, the following products shall be considered as originating in the Community:

(a)

products wholly obtained in the Community within the meaning of Article 5;

(b)

products obtained in the Community incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the Community within the meaning of Article 6;

2.

For the purpose of implementing this Agreement, the following products shall be considered as originating in Montenegro:

(a)

products wholly obtained in Montenegro within the meaning of Article 5;

(b)

products obtained in Montenegro incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Montenegro within the meaning of Article 6.

Article 3

Cumulation in the Community

1.

Without prejudice to the provisions of Article 2(1), products shall be considered as originating in the Community if such products are obtained there, incorporating materials originating in Montenegro, in the Community or in any country or territory participating in the European Union's Stabilisation and Association process ( 1 ) , or incorporating the materials originating in Turkey to which the Decision No o 1/95 of the EC-Turkey Association Council of 22 December 1995 ( 2 ) applies, provided that the working or processing carried out in the Community goes beyond the operations referred to in Article 7. It shall not be necessary that such materials have undergone sufficient working or processing.

2.

Where the working or processing carried out in the Community does not go beyond the operations referred to in Article 7, the product obtained shall be considered as originating in the Community only where the value added there is greater than the value of the materials used originating in any one of the other countries or territories referred to in paragraph 1. If this is not so, the product obtained shall be considered as originating in the country which accounts for the highest value of originating materials used in the manufacture in the Community.

3.

Products, originating in one of the countries or territories referred to in paragraph 1, which do not undergo any working or processing in the Community, retain their origin if exported into one of these countries or territories.

4.

The cumulation provided for in this Article may be applied only provided that:

(a)

a preferential trade agreement in accordance with Article XXIV of the General Agreement on Tariffs and Trade (GATT) is applicable between the countries or territories involved in the acquisition of the originating status and the country of destination;

(b)

materials and products have acquired originating status by the application of rules of origin identical to those given in this Protocol;

and

(c)

notices indicating the fulfilment of the necessary requirements to apply cumulation have been published in the Official Journal of the European Union (C series) and in Montenegro according to its own procedures.

The cumulation provided for in this Article shall apply from the date indicated in the notice published in the Official Journal of the European Union (C series).

The Community shall provide Montenegro, through the European Commission, with details of the Agreements and their corresponding rules of origin, which are applied with the other countries or territories referred to in paragraph 1.

The products in Annex V shall be excluded from the cumulation provided for in this Article.

Article 4

Cumulation in Montenegro

1.

Without prejudice to the provisions of Article 2(2), products shall be considered as originating in Montenegro if such products are obtained there, incorporating materials originating in the Community, Montenegro, or in any country or territory participating in the European Union's Stabilisation and Association Process ( 3 ) , or incorporating the materials originating in Turkey to which the Decision n o 1/95 of the EC-Turkey Association Council of 22 December 1995 ( 4 ) applies, provided that the working or processing carried out in Montenegro goes beyond the operations referred to in Article 7. It shall not be necessary that such materials have undergone sufficient working or processing.

2.

Where the working or processing carried out in Montenegro does not go beyond the operations referred to in Article 7, the product obtained shall be considered as originating in Montenegro only where the value added there is greater than the value of the materials used originating in any one of the other countries or territories referred to in paragraph 1. If this is not so, the product obtained shall be considered as originating in the country which accounts for the highest value of originating materials used in the manufacture in Montenegro.

3.

Products, originating in one of the countries or territories referred to in paragraph 1, which do not undergo any working or processing in Montenegro, retain their origin if exported into one of these countries or territories.

4.

The cumulation provided for in this Article may be applied only provided that:

(a)

a preferential trade agreement in accordance with Article XXIV of the General Agreement on Tariffs and Trade (GATT) is applicable between the countries or territories involved in the acquisition of the originating status and the country of destination;

(b)

materials and products have acquired originating status by the application of rules of origin identical to those given in this Protocol;

and

(c)

notices indicating the fulfilment of the necessary requirements to apply cumulation have been published in the Official Journal of the European Union (C series) and in Montenegro according to its own procedures.

The cumulation provided for in this Article shall apply from the date indicated in the notice published in the Official Journal of the European Union (C series).

Montenegro shall provide the Community, through the European Commission with details of the Agreements, including their dates of entry into force, and their corresponding rules of origin, which are applied with the other countries or territories referred to in paragraph 1.

The products in Annex V shall be excluded from the cumulation provided for in this Article.

Article 5

Wholly obtained products

1.

The following shall be considered as wholly obtained in the Community or in Montenegro:

(a)

mineral products extracted from their soil or from their seabed;

(b)

vegetable products harvested there;

(c)

live animals born and raised there;

(d)

products from live animals raised there;

(e)

products obtained by hunting or fishing conducted there;

(f)

products of sea fishing and other products taken from the sea outside the territorial waters of the Community or of Montenegro by their vessels;

(g)

products made aboard their factory ships exclusively from products referred to in (f);

(h)

used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or for use as waste;

(i)

waste and scrap resulting from manufacturing operations conducted there;

(j)

products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(k)

goods produced there exclusively from the products specified in (a) to (j).

2.

The terms ‘their vessels’ and ‘their factory ships’ in paragraph 1(f) and (g) shall apply only to vessels and factory ships:

(a)

which are registered or recorded in a Member State of the Community or in Montenegro;

(b)

which sail under the flag of a Member State of the Community or of Montenegro;

(c)

which are owned to an extent of at least 50 % by nationals of a Member State of the Community or of Montenegro, or by a company with its head office in one of these States, of which the manager or managers, Chairman of the Board of Directors or the Supervisory Board, and the majority of the members of such boards are nationals of a Member State of the Community or of Montenegro and of which, in addition, in the case of partnerships or limited companies, at least half the capital belongs to those States or to public bodies or nationals of the said States;

(d)

of which the master and officers are nationals of a Member State of the Community or of Montenegro;

and

(e)

of which at least 75 % of the crew are nationals of a Member State of the Community or of Montenegro.

Article 6

Sufficiently worked or processed products

1.

For the purposes of Article 2, products which are not wholly obtained are considered to be sufficiently worked or processed when the conditions set out in the list in Annex II are fulfilled.

The conditions referred to above indicate, for all products covered by this Agreement, the working or processing which must be carried out on non originating materials used in manufacturing and apply only in relation to such materials. It follows that if a product which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.

2.

Notwithstanding paragraph 1, non originating materials which, according to the conditions set out in the list, should not be used in the manufacture of a product may nevertheless be used, provided that:

(a)

their total value does not exceed 10 % of the ex works price of the product;

(b)

any of the percentages given in the list for the maximum value of non originating materials are not exceeded through the application of this paragraph.

This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.

3.

Paragraphs 1 and 2 shall apply subject to the provisions of Article 7.

Article 7

Insufficient working or processing

1.

Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 6 are satisfied:

(a)

preserving operations to ensure that the products remain in good condition during transport and storage;

(b)

breaking-up and assembly of packages;

(c)

washing, cleaning; removal of dust, oxide, oil, paint or other coverings;

(d)

ironing or pressing of textiles;

(e)

simple painting and polishing operations;

(f)

husking, partial or total bleaching, polishing, and glazing of cereals and rice;

(g)

operations to colour sugar or form sugar lumps;

(h)

peeling, stoning and shelling, of fruits, nuts and vegetables;

(i)

sharpening, simple grinding or simple cutting;

(j)

sifting, screening, sorting, classifying, grading, matching; (including the making-up of sets of articles);

(k)

simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;

(l)

affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;

(m)

simple mixing of products, whether or not of different kinds; mixing of sugar with any other material;

(n)

simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;

(o)

a combination of two or more operations specified in (a) to (n);

(p)

slaughter of animals.

2.

All operations carried out either in the Community or in Montenegro on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.

Article 8

Unit of qualification

1.

The unit of qualification for the application of the provisions of this Protocol shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.

It follows that:

(a)

when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification;

(b)

when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product must be taken individually when applying the provisions of this Protocol.

2.

Where, under General Rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.

Article 9

Accessories, spare parts and tools

Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

Article 10

Sets

Sets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.

Article 11

Neutral elements

In order to determine whether a product originates, it shall not be necessary to determine the origin of the following which might be used in its manufacture:

(a)

energy and fuel;

(b)

plant and equipment;

(c)

machines and tools;

(d)

goods which do not enter and which are not intended to enter into the final composition of the product.

TITLE III

TERRITORIAL REQUIREMENTS

Article 12

Principle of territoriality

1.

Except as provided for in Articles 3 and 4 and paragraph 3 of this Article, the conditions for acquiring originating status set out in Title II must be fulfilled without interruption in the Community or in Montenegro.

2.

Except as provided for in Articles 3 and 4, where originating goods exported from the Community or from Montenegro to another country return, they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

(a)

the returning goods are the same as those exported;

and

(b)

they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

3.

The acquisition of originating status in accordance with the conditions set out in Title II shall not be affected by working or processing done outside the Community or Montenegro on materials exported from the Community or from Montenegro and subsequently re-imported there, provided:

(a)

the said materials are wholly obtained in the Community or in Montenegro or have undergone working or processing beyond the operations referred to in Article 7 prior to being exported;

and

(b)

it can be demonstrated to the satisfaction of the customs authorities that:

(i)

the re-imported goods have been obtained by working or processing the exported materials;

and

(ii)

the total added value acquired outside the Community or Montenegro by applying the provisions of this Article does not exceed 10 % of the ex-works price of the end product for which originating status is claimed.

(i)

the re-imported goods have been obtained by working or processing the exported materials;

and

(ii)

the total added value acquired outside the Community or Montenegro by applying the provisions of this Article does not exceed 10 % of the ex-works price of the end product for which originating status is claimed.

4.

For the purposes of paragraph 3, the conditions for acquiring originating status set out in Title II shall not apply to working or processing done outside the Community or Montenegro. But where, in the list in Annex II, a rule setting a maximum value for all the non-originating materials incorporated is applied in determining the originating status of the end product, the total value of the non-originating materials incorporated in the territory of the Party concerned, taken together with the total added value acquired outside the Community or Montenegro by applying the provisions of this Article, shall not exceed the stated percentage.

5.

For the purposes of applying the provisions of paragraphs 3 and 4, ‘total added value’ shall be taken to mean all costs arising outside the Community or Montenegro, including the value of the materials incorporated there.

6.

The provisions of paragraphs 3 and 4 shall not apply to products which do not fulfil the conditions set out in the list in Annex II or which can be considered sufficiently worked or processed only if the general tolerance fixed in Article 6(2) is applied.

7.

The provisions of paragraphs 3 and 4 shall not apply to products of Chapters 50 to 63 of the Harmonised System.

8.

Any working or processing of the kind covered by the provisions of this Article and done outside the Community or Montenegro shall be done under the outward processing arrangements, or similar arrangements.

Article 13

Direct transport

This article is long: the rest is at the official publication.