6 ANNEX 5 TYRE SIZE DESIGNATION AND DIMENSIONS (IN ACCORDANCE WITH ECE REGULATION NO 54) For this information refer to Annex 5 of ECE Regulation No 54, Decision_act (EU) 2006/443

In force

Note that with reference to paragraph 6.5.4 of this Regulation, the outer diameter of a retreaded tyre may in all cases be greater than that shown in the tables in Annex 5 to Regulation No 54 but by no more than 1,5 %.

1.

The tyre shall be mounted on the test rim specified by the retreader and inflated to the nominal inflation pressure quoted in the nominated International Tyre Standard (see paragraph 4.1.4.7 of this Regulation) in relation to the maximum load carrying capacity for that size and load index.

2.

The tyre, fitted to the appropriate rim, shall be conditioned to the ambient temperature of the laboratory for at least 24 hours save as otherwise required by paragraph 6.6.3 of this Regulation.

3.

The pressure shall be re-adjusted to the value in paragraph 1 of this Annex.

4.

The overall width shall be measured at six equally spaced points around the tyre, taking account of the thickness of any protective ribs or bands. The highest reading obtained shall be taken as the overall width.

5.

The outer diameter shall be calculated from a measurement of the maximum circumference of the inflated tyre.