b: 6 mm (min.)
c: 4 mm (min.)
d: 3 mm (min.)
and since 1998: 4 mm (min.)
MINIMUM HEIGHTS OF MARKINGS (mm)
Tyres of
rim diameter ≤ code 20 or
≤ 508 mm
or of section width
≤ 235 mm or ≤ 9"
Tyres of rim diameter
> code 20 or
> 508 mm
or of section width
> 235 mm or > 9"
b
6
9
c
4
d
6
The above example defines a retreaded pneumatic tyre:
Having a nominal section width of 295;
Having a nominal aspect ratio of 80;
Of radial-ply structure (R);
Having a nominal rim diameter of 572 mm, for which the code is 22.5;
Having load capacities of 3550 kg (single) and 3150 kg (twinned or dual), corresponding respectively to the load indices 152 and 148 shown in Annex 4 to this Regulation;
Having a nominal speed symbol K (reference speed 110 km/h);
Able to be used at the Unique Point, speed symbol L (reference speed 120 km/h); with a load capacity of 3350 kg (single) and 3000 kg (twinned or dual), corresponding respectively to the load indices 150 and 146 shown in Annex 4 to this Regulation;
Intended to be used without an inner tube (TUBELESS) and of Snow type (M+S);
Retreaded in the weeks 25, 26, 27 or 28 of the year 2003.
Requiring to be inflated to 620 kPa for load/speed endurance tests, for which the PSI symbol is 90.
The positioning and order of the markings constituting the tyre designation shall be as follows:
The size designation, comprising the nominal section width, the nominal aspect ratio, the type-of-structure symbol (where applicable) and the nominal rim diameter, shall be grouped as shown in the above example, that is: 295/80 R 22,5;
The service description, comprising the load indices and the speed symbol shall be placed together near the size designation. It may either precede the size designation or follow it or be placed above or below it;
The symbol “TUBELESS” and “M+S” may be at a distance from the size-designation symbol.
The word “RETREAD” may be at a distance from the size-designation symbol.
If paragraph 3.2.5 of this Regulation is applied, the additional service description (Unique Point), comprising the load indices and speed symbol, must be shown inside a circle near the nominal service description appearing on the tyre sidewall.