, Decision_act (EU) 1992/194

In forcesince 4 Mar 1992

Pursuant to Article 9 of Regulation (Euratom) No 3227/76 the undertakings shall maintain a system of accounting for and control of nuclear materials. This system shall include accounting and operating records and, in particular, information on the quantities, nature, form and composition of these materials, their actual location and the particular safeguarding obligation. The system of measurements on which the records are based shall comply with the most recent international standards or shall be equivalent in quality to those standards. On the basis of these records it must be possible to establish and justify the communications addressed to the Commission.

Specific records requirements are set out in code 3 of the Commission Decision of 4 February 1981 laying down particular safeguard provisions.

Pursuant to Article 10 of Regulation (Euratom) No 3227/76 the acconting records shall show in respect of each material balance area:

–

all inventory changes, so as to permit a determination of the book inventory at any time,

–

all measurement and counting results that are used for determination of the physical inventory,

–

all corrections that have been made in respect of inventory changes, book inventories and physical inventories.

Thus for all inventory changes and physical inventories the accounting records shall show, in respect of each batch of nuclear material, material identification, batch data and source data. Moreover for each inventory change, the date of the inventory change and, when appropriate, the dispatching material balance area and the receiving material balance area or the recipient, shall be indicated.

Article 11 of Regulation (Euratom) No 3227/76 provides that the operating records shall include, if appropriate, for each material balance area:

–

those operating data which are used to establish changes in the quantities and composition of the nuclear material,

–

the data obtained from the calibration of tanks and instruments and from sampling and analysis, the procedures to control the quality of measurements and the derived estimates of random and systematic error,

–

a description of the sequence of actions taken in preparing for, and in taking, a physical inventory in order to ensure that it is correct and complete,

–

a description of the actions taken in order to ascertain the cause and magnitude of any accidental or unmeasured loss that might have occurred.