(Manufacturer): …..
(Address of the Manufacturer): …..
Declares that:
[The following paragraph shall apply in the case that the emission limits are applied. It is not applicable in the case that lower declared maximum RDE values are applied:]
The vehicle types listed in Annex I to this declaration comply with the requirements laid down in Annex III to Implementing Regulation (EU) 2025/1706 for all valid RDE tests which are performed in accordance with the requirements of that Regulation.
[The following paragraph shall apply in the case that lower declared maximum RDE values are applied. It is not applicable in the case that the emission limits are applied:]
The vehicle(s) covered by this approval / the vehicle(s) listed in Annex I to this declaration(1) is/are(2) in compliance with the declared maximum RDE values as set out in the table below:
Declared maximum RDE values
Mass of oxides of nitrogen (NOx) | (mg/km)
Number of particles (PN10) | (#/km)
Done at [….. Place(3)]
On [….. Date]
[Name and signature of person authorised by the Manufacturer or Manufacturer’s Representative(4)]
Attachment(s)
Annex I: The Vehicle Type(s), Family(ies) or vehicles described by other vehicle descriptor(s) to which this declaration applies (if applicable).
Delete what is not applicable.
Select “is” or “are” as applicable.
Established in the Union.
‘Manufacturer’s representative’ means any natural or legal person established in the Union who is duly appointed by the manufacturer to represent the manufacturer before the approval authority or the market surveillance authority and to act on the manufacturer’s behalf in matters covered by Regulation (EU) 2018/858, as defined in Article 3, point (41), of that Regulation..;