The competent authority shall assess the stand with respect to the purposes for which the FRM is intended to be used, as referred to in Article 3, point (1), and determine the criteria for selection on the basis of those purposes. Those purposes shall be indicated in the national register of the Member State concerned.
It shall be determined either by historical evidence (e.g. bibliography, or documentation kept by competent authorities, research institutes or any other organisations) or by other appropriate means (e.g. provenance trials), including internationally recognised biochemical and molecular techniques, whether the stand is indigenous or non-indigenous or whether its origin is unknown and, if it is indigenous, whether it is autochthonous or non-autochthonous. For non-indigenous basic material, the origin shall be stated if known.
The age or stage of development of the trees in the stand shall be such as to allow the criteria given for the selection of those trees to be clearly judged.
The basic material shall be a stand located within a single region of provenance.
Purposes ‘multifunctional forestry’, ‘production of wood, biomaterials, biomass or other forest products’: Stands shall be situated, if possible, at a sufficient distance from stands of poor quality of the same species or from stands of a related species which can form hybrids with the species in question. Particular attention shall be paid to this requirement when stands surrounding autochthonous/indigenous stands are non-autochthonous/non-indigenous or of unknown origin.
Purpose ‘conservation of forest genetic resources’: Stands shall be situated, if possible, at a sufficient distance from stands of the same species or from stands of a related species which can form hybrids with the species in question. Particular attention shall be paid to this requirement when stands surrounding autochthonous/indigenous stands are non-autochthonous/non-indigenous or of unknown origin.
Purposes ‘multifunctional forestry’, ‘production of wood, biomaterials, biomass or other forest products’: Stands shall consist of one or more groups of sexually mature trees. Those trees shall be well distributed and sufficiently numerous in a given area to maintain genetic diversity, to avoid the unfavourable effects of inbreeding and to ensure adequate cross-pollination between those trees.
Purpose ‘conservation of forest genetic resources’: Stands shall, if possible, consist of one or more groups of sexually mature trees. Those trees shall, if possible, be well distributed and sufficiently numerous in a given area to maintain genetic diversity, according to the available scientific knowledge, to avoid the unfavourable effects of inbreeding and to ensure adequate cross-pollination between those trees. FRM shall be collected from an optimal number of individuals of the approved basic material, taking into account natural conditions.
Purposes ‘multifunctional forestry’, ‘production of wood, biomaterials, biomass or other forest products’: Stands shall show a normal degree of individual variation in morphological characteristics. This requirement does not apply to biomass production. Where necessary, inferior trees shall be removed.
Purpose ‘conservation of forest genetic resources’: Stands shall, if possible, show a normal degree of individual variation in morphological characteristics. Where necessary, inferior trees shall be removed.
Purposes ‘multifunctional forestry’, ‘production of wood biomaterials, biomass or other forest products’: Stands shall be well adapted to the climatic and ecological conditions, including the biotic and abiotic factors prevailing in the region of provenance. The trees shall show resistance or tolerance to pests and the adverse climatic and site conditions in the place where they are growing.
Purpose ‘conservation of forest genetic resources’: Stands shall, if possible, be well adapted to the climatic and ecological conditions, including the biotic and abiotic factors prevailing in the region of provenance. The trees shall, if possible, show resistance or tolerance to pests and the adverse climatic and site conditions in the place where they are growing.
Purposes ‘multifunctional forestry’, ‘production of wood, biomaterials, biomass or other forest products’: The volume of production shall normally be superior to the accepted average volume produced under similar ecological and management conditions.
Purpose ‘conservation of forest genetic resources’: No volume production requirements apply.
Purposes ‘multifunctional forestry’, ‘production of wood, biomaterials, biomass or other forest products’: The wood quality shall normally be superior to the accepted average quality under similar ecological and management conditions. This requirement does not apply to the production of biomaterials, biomass or other forest products.
Purpose ‘conservation of forest genetic resources’: No wood quality requirements apply.
Purposes ‘multifunctional forestry’, ‘production of wood, biomaterials, biomass or other forest products’: Trees shall show particularly good morphological features, especially straightness and circularity of stem, favourable branching habit, small size of branches and good natural pruning. In addition, the proportion of forked trees and those showing spiral grain shall be low, and where necessary, such trees shall be removed. This requirement does not apply to the production of biomaterials, biomass or other forest products.
Purpose ‘conservation of forest genetic resources’: No form of growth habit requirements apply.
Competent authorities shall assess the stand with respect to certain traits or the production of certain forest products and, where appropriate, adopt other specific requirements for those traits or products. Where such requirements apply, they shall be indicated in accordance with Article 15(3), point (m).
x = applicable; (x) = applicable, if possible; — = not applicable
Purposes
Multifunctional forestry | Production of wood, biomaterials, biomass or other forest products | Conservation of forest genetic resources
Specific requirements | Isolation | (x) | (x) | (x)
Number of harvestable and sexually mature trees | x | x | (x)
Uniformity | x | x (except for biomass production) | (x)
Sustainability characteristics | x | x | (x)
Volume production | x | x | —
Wood quality | x | x (only for wood production) | —
Form of growth habit | x | x (only for wood production) | —
Other specific requirements (specific traits or products) | Where applicable | Where applicable | Where applicable