Economic operator
1.1 Name:
1.2 Headquarter’s address:
1.3 Production site address:
1.4 Date:
Material
2.1. Name or specification of material/Tradename:
2.2. Country of origin:
2.3. Commodity code used for import (if the material to which this declaration applies originates from import):
2.4. Batch number:
2.5. Total weight [in kg]:
2.6. Weight of post-consumer plastic waste as defined in Article 1(2) of Commission Implementing Decision (EU) 2026/1425 [in kg]:
2.7. Percentage of post-consumer plastic waste as defined in Article 1(2) of Commission Implementing Decision (EU) 2026/1425 [= ratio of 2.6 and 2.5]:
[OJ L 243, 20.9.2022, p. 3, ELI: http://data.europa.eu/eli/reg/2022/1616/oj.] [OJ L 12, 15.1.2011, p. 1, ELI: http://data.europa.eu/eli/reg/2011/10/oj.]
Economic operator
1.1. Name:
1.2. Headquarter’s address:
1.3. Production site address:
1.4. Date:
Material
2.1. Name or specification of material/Tradename:
2.2.1 Has feedstock for this or previous steps of the supply chain been imported from third countries?
□Yes | □No
2.2.2 If yes, from which third countries ?
(add rows as appropriate)
2.2.3 If yes, commodity codes used for imports:
(add rows as appropriate)
2.3. Batch number:
2.4. Total weight [in kg]:
2.5. Weight of material stemming from post-consumer plastic waste as defined in Article 1(2), for which all recycling steps (including sorting) have taken place in countries that are in scope of Article 1(1) of Commission Implementing Decision (EU) 2026/1425, calculated in compliance with Article 6 of Commission Implementing Decision (EU) 2026/1425 [in kg]:
2.6. Percentage of material stemming from post-consumer plastic waste as defined in Article 1(2), for which all recycling steps (including sorting) have taken place in countries that are in scope of Article 1(1) of Commission Implementing Decision (EU) 2026/1425, calculated in compliance with Article 6 of Commission Implementing Decision (EU) 2026/1425 [= ratio of 2,5 and 2,4]:
Recycling technologies
3.1. Recycling technologies that have been applied to the material
Recycling technology: | Share of material resulting from this technology:
(add rows as appropriate) |
3.2. Is the material within the scope of Commission Regulation (EU) 2022/1616 of 15 September 2022 on recycled plastic materials and articles intended to come into contact with foods, and repealing Regulation (EC) No 282/2008?
□Yes | □No
If Yes: Present/actual recycled content as declared in the respective declaration of compliance pursuant to Annex III of Regulation (EU) 2022/1616: |
3.3. Is the material within the scope of Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food?
□Yes | □No
Mass balance accounting
4.1. Has mass balance accounting been applied to the material at this or at previous stages?
□Yes | □No
4.2. If yes, fill in the table below with the information on the certificate(s) of the economic operator(s) that have intervened in this (if applicable) or in the previous step of the supply chain that have been certified pursuant to Article 8(5) of Commission Implementing Decision (EU) 2026/1425
Verification registry number of the economic operator(s) holding a certificate: | Identity of the verifier: | Certification valid until:
(add rows as appropriate) | |
Obligatory attachments:
Copy of the declaration of compliance pursuant to Regulation (EU) 2022/1616 or pursuant to Regulation (EU) No 10/2011, as applicable
If mass balance accounting has been applied, copies of the certificate(s) of the economic operator(s) pursuant to Article 8(9) of Commission Implementing Decision (EU) 2026/1425.
Economic operator
1.1. Name:
1.2. Headquarter’s Address:
1.3. Production site address:
1.4. Date:
Material
2.1 Batch number:
2.2.1 Has feedstock for this or previous steps of the supply chain been imported from third countries?
□Yes | □No
2.2.2. If yes, from which which third countries ?
(add rows as appropriate)
2.2.3 If yes, commodity codes used for imports:
(add rows as appropriate)
2.3. Total weight [in kg]:
2.4. Weight of material stemming from post-consumer plastic waste as defined in Article 1(2) and calculated in compliance with Article 6 of Commission Implementing Decision (EU) 2026/1425 [in kg], for which all recycling steps (including sorting) have taken place in countries that are in scope of Article 1(1) of Commission Implementing Decision (EU) 2026/1425:
2.5. Percentage of material stemming from post-consumer plastic waste as defined in Article 1(2) and calculated in compliance with Article 6 of Commission Implementing Decision (EU) 2026/1425, for which all recycling steps (including sorting) have taken place in countries that are in scope of Article 1(1) of Commission Implementing Decision (EU) 2026/1425 [= ratio of 2,4 and 2,3]: