For the purposes of this Decision, the following definitions apply:
‘recycled plastic’ means plastic which was post-consumer plastic waste before recycling, and which has been produced by recycling (including sorting), as defined in Article 3, point (17), of Directive 2008/98/EC, in the Union. As of 21 November 2027, it shall also cover post-consumer plastic waste that has been recycled (including sorted) in:
a third country to which the OECD decision applies, unless the assessment carried out and decision adopted pursuant to Article 45(5) and (6) of Regulation (EU) 2024/1157 concludes that it does not fulfil the requirements of environmentally sound management of plastic waste;
a third country with which the Union has concluded agreements or arrangements to ensure that the recycled plastic is obtained from post-consumer plastic waste that has been treated in each relevant installation in a manner equivalent to EU standards related to human health and environmental protection requirements under Union legislation, in particular in Directive 2008/98/EC and Regulation (EU) 2025/40, as relevant. The country shall also have a comprehensive waste management framework covering its entire territory and demonstrating its ability and willingness to guarantee environmentally sound waste management, taking into account in particular the following criteria:
the measures implemented and planned to ensure the environmentally sound management of waste within its territory, such as the introduction of an extended producer responsibility system or an equivalent system implementing the polluter pays principle;
the measures implemented and planned to increase the proportion of plastic recycled from post-consumer plastic waste, and the indicators for monitoring these measures;
the measures implemented and planned to increase the proportion of plastic recycled from post-consumer plastic waste incorporated in products placed on the national market, and the indicators for monitoring these measures;
‘post-consumer plastic waste’ means waste that has been generated from plastic products that have been:
placed on the market of the Union;
placed on the market or supplied for distribution, consumption or use in a third country, in the course of a commercial activity, whether in return for payment or free of charge.
‘beverage bottle’ means a single-use plastic beverage bottle with a capacity of up to three litres, including its cap, lid, label and sleeve, if any, but excluding the following bottles:
glass or metal beverage bottles that have caps and lids made from plastic;
beverage bottles intended and used for food for special medical purposes as defined in Article 2(2), point (g), of Regulation (EU) No 609/2013 of the European Parliament and of the Council [Regulation (EU) No 609/2013 of the European Parliament and of the Council of 12 June 2013 on food intended for infants and young children, food for special medical purposes, and total diet replacement for weight control and repealing Council Directive 92/52/EEC, Commission Directives 96/8/EC, 1999/21/EC, 2006/125/EC and 2006/141/EC, Directive 2009/39/EC of the European Parliament and of the Council and Commission Regulations (EC) No 41/2009 and (EC) No 953/2009 (OJ L 181 29.6.2013, p. 35, ELI: http://data.europa.eu/eli/reg/2013/609/oj).]that is in liquid form;
‘PET bottle’ means a beverage bottle which is manufactured from polyethylene terephthalate as the major component;
‘economic operator’ means any of the following operators, that are part of the supply chain leading to the placing of beverage bottles on the market or that place beverage bottles on the market:
a recycler as defined in Article 2(3), point (16), of Regulation (EU) 2022/1616;
a converter as defined in Article 2(3), point (17), of Regulation (EU) 2022/1616;
a food business operator as defined in Article 3(3) of Regulation (EC) No 178/2002 of the European Parliament and of the Council [Regulation (EC) No 178/2002 of the European Parliament and of the Council of 28 January 2002 laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety (OJ L 31, 1.2.2002, p. 1, ELI: http://data.europa.eu/eli/reg/2002/178/oj).];
any natural or legal person established in the Union that places a product from a third country on the market of a Member State;
any natural or legal person dealing on a professional basis with either the collection or treatment of waste or both.
‘recycling technology’ means recycling technology as defined in Article 2(3), point (1), of Regulation (EU) 2022/1616;
‘eligible material’ means post-consumer plastic waste and material stemming from post-consumer plastic waste;
‘supply chain’ means the series of processes or activities involved in the production and distribution of beverage bottles;
‘calculation point’ means a point in the supply chain at which the content of eligible material for a given material is determined;
‘batch’ means batch as defined in Article 2(3), point (20), of Regulation (EU) 2022/1616;
‘mass balance accounting’ means a set of calculation rules used to determine the attributed amount throughout a supply chain and in the outputs, where the eligible material is used together with other material as input into the process;
‘attributed amount’ means the weight of eligible material that enters a process and that is allocated to the outputs of the process for a given period;
‘output category’ means a grouping of outputs into any of the following categories:
outputs other than losses, that are or will be reprocessed into materials other than fuels, including plastic (‘non-fuels’);
outputs other than losses, that are fuels, including outputs that are consumed to provide energy for the process itself, or that will be reprocessed into materials that are to be used as fuels (‘fuels’);
outputs, other than losses, that can be reprocessed either into fuels or materials other than fuels (‘dual-use outputs’);
outputs that are disposed of within the meaning of Article 3(19) of Directive 2008/98/EC (‘losses’);
‘facility’ means one or more manufacturing plants at the same site, under the management control of the same economic operator, where activities, products and services are managed, including all associated infrastructure, equipment and materials;
‘verification’ means the process by which a verifier attests that an economic operator meets the requirements regarding calculation of data on to the recycled content of beverage bottles;
‘verifier’ means a conformity assessment body as defined in Article 2, point (13), of Regulation (EC) 765/2008 of the European Parliament and of the Council [Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and repealing Regulation (EEC) No 339/93 (OJ L 218, 13.8.2008, p. 30, ELI: http://data.europa.eu/eli/reg/2008/765/oj).], which is accredited in accordance with that Regulation;
‘recycling pathway’ means a process, including its different steps, which preserves the potential of eligible material being processed into a non-fuel;
‘mechanical recycling’ means a recycling technology that recovers collected plastic waste through mechanical and physical processes, including by sorting, grinding, washing, separating materials, drying, extruding and re-crystallisation to produce plastic without changing the chemical structure of the plastic waste input;
‘maximum acceptable boiling point’ means, in a case where the eligible material or parts thereof will be fed into one single steam cracker, the maximum acceptable boiling point of that steam cracker or, in a case where the eligible material or parts thereof will be processed by different steam crackers, the weighted average of the maximum acceptable boiling points of all the individual steam crackers.