Recital 16, Regulation (EU) 2025/2620

In forcesince 16 Dec 2025

Union policy on the environment is to be based on the polluter pays principle, in accordance with Article 191(2) of the Treaty. This principle is also applied in the EU ETS for the free allocation of allowances, as set out in Commission Delegated Regulation (EU) 2019/331 [Commission Delegated Regulation (EU) 2019/331 of 19 December 2018 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (OJ L 59, 27.2.2019, p. 8, ELI: http://data.europa.eu/eli/reg_del/2019/331/oj).]. Currently, direct reduced iron (DRI) is covered by the hot metal benchmark of the EU ETS and, without further differentiation, imports of steel based on natural-gas DRI would receive a free allocation adjustment that exceeds their embedded emissions for the first years in which a CBAM obligation is due, which means that no CBAM certificates would be due for DRI-based goods. Compared to this, secondary steel imports would face a CBAM obligation, despite having lower actual embedded emissions than DRI. In addition, the potential free allocation adjustment stemming from the hot metal benchmark would create a situation in which more carbon-intensive natural gas based DRI imports would receive more free allocation adjustment than secondary steel producers, which receive comparably less free allocation based on the electric arc furnace (EAF) benchmarks, therefore increasing the carbon leakage risk for secondary steel producers in the Union. In line with the principles to be applied for the allocation of free allowances under the EU ETS, to ensure the environmental integrity of the CBAM and to address the potential risk of carbon leakage of the production of secondary steel in the Union, a dedicated CBAM benchmark for natural gas-based DRI should be created. Taking into account the relative level of embedded emissions, the level of the DRI benchmark should be chosen to ensure that the CBAM obligation for primary natural gas-based DRI imports is lower than for primary blast furnace steel, but higher than for secondary steel.