Recital 15, Regulation (EU) 2025/2620

In forcesince 16 Dec 2025

In order to reflect the EU ETS benchmarks, CBAM benchmarks for simple goods were calculated using the EU ETS product benchmarks of the same type of good. Where no product benchmark is defined, the average share of the heat versus the fuel benchmark for the period 2021-2025 in the EU ETS reported for relevant product groups in the relevant baseline data was used to determine their respective contribution to the CBAM benchmarks. As no data on energy consumption per tonne of good is available from EU ETS data, energy consumption levels to be applied to these fallback benchmarks as well as the level of process emissions, where relevant, were aligned with the data and assumptions used for the determination of default values for the embedded emissions. In order to further align the CBAM benchmarks for complex goods with the default values for embedded emissions, the quality and quantity of precursors implied in the calculation was aligned with the data used for the calculation of the default values embedded emissions. This includes the selection of reference levels of clinker contained in cement, formulation of mixed fertilisers, and alloy grades for steel. EU ETS benchmarks are not fully aligned with CN codes or the aggregated goods categories defined in Implementing Regulation (EU) 2025/2547. In particular, some EU ETS benchmarks depend on certain production routes. For ensuring that under the CBAM the respective goods are treated equally as under the EU ETS, production-route specific values were determined for primary and secondary aluminium as well as for crude steel based on blast furnace, direct reduced iron (DRI) and electric arc furnace (EAF) routes.