For the purposes of this Regulation, the definitions in Article 2 of Commission Regulation (EU) 2017/1151 [Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (OJ L 175, 7.7.2017, p. 1).], and Article 3 of Regulation (EU) 2019/631 shall apply.
The following definitions shall also apply:
‘granting type-approval authority’ means the type-approval authority that granted the emission type-approval in accordance with Regulation (EC) No 715/2007 of the European Parliament and of the Council [Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (OJ L 171, 29.6.2007, p. 1).], or where applicable, in accordance with Regulation (EC) No 595/2009 of the European Parliament and of the Council [Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on type-approval of motor vehicles and engines with respect to emissions from heavy duty vehicles (Euro VI) and on access to vehicle repair and maintenance information and amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC (OJ L 188, 18.7.2009, p. 1).];
‘in-service verification family’ means all M1 or N1 vehicles, for which one type-approval authority granted the emission type-approval in accordance with Regulation (EC) No 715/2007 or, where applicable, Regulation (EC) No 595/2009 on the basis of the same Type 1 test as set out in Annex XXI to Regulation (EU) 2017/1151 for ‘vehicle high’ or ‘vehicle low’;
‘road load family’ means road load family or road load matrix family as defined in paragraphs 6.3.3. and 6.3.4. of UN Regulation No 154; in case of N1 vehicles type-approved according to Regulation (EC) No 595/2009, a road load family consists of all vehicles of the in-service verification family concerned;
‘artificial strategies’ means strategies on board or relating to the sampled vehicles that artificially improve the vehicle’s performance in the tests performed for the purpose of type-approval.