Art. 19 Regulation (EU) 2022/1616

Authorisation of an individual recycling process

In forcesince 15 Sep 2022
1.

Taking into account the opinion of the Authority, relevant provisions of Union law and other legitimate factors relevant to the matter under consideration, the Commission shall consider whether the individual recycling process complies with the conditions of use of the suitable recycling technology it applies and produces recycled plastic materials and articles that comply with Article 3 of Regulation (EC) No 1935/2004 and are microbiologically safe.

The Commission shall prepare a draft decision to be addressed to the applicant granting or refusing the authorisation of the recycling process. Article 23(1) of Regulation (EC) No 1935/2004 and Article 5 of Regulation (EU) No 182/2011 of the European Parliament and of the Council [Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission’s exercise of implementing powers (OJ L 55, 28.2.2011, p. 13).] shall apply.

Where the draft decision is not in accordance with the opinion of the Authority, the Commission shall explain the reasons for its decision.

2.

A decision granting the authorisation shall include the following:

(a)

a recycling process authorisation number (‘RAN’);

(b)

the name of the recycling process;

(c)

the recycling technology, as listed in Annex I, for which the process is authorised;

(d)

the name and address of the authorisation holder;

(e)

a reference to the opinion of the Authority on which the decision is based;

(f)

any specific requirements for the operation of the decontamination process, pre-processing and post-processing complementing or derogating from the general requirements set out in Articles 6, 7 and 8, or Article 9;

(g)

any specific requirements concerning monitoring and verification of the compliance of the recycling process with the conditions of the authorisation;

(h)

any conditions, specifications, and specific labelling requirements concerning the use of recycled plastic originating from the process.