Art. 18 Regulation (EU) 2022/1616

Opinion of the Authority

In forcesince 3 Dec 2025cited 1×
1.

The Authority shall give an opinion within a time limit of 6 months from the receipt of a valid application as to whether the recycling process is capable of applying the suitable recycling technology it uses so that plastic materials and articles manufactured with it meet Article 3 of Regulation (EC) No 1935/2004 and are microbiologically safe.

The Authority may extend the time limit provided for in the first subparagraph by a maximum period of a further 6 months. In such a case, it shall provide an explanation for the extension to the applicant, the Commission and the Member States.

2.

The Authority may, where appropriate, request the applicant to supplement the particulars accompanying the application within a specified time, whether in writing or by oral explanation. Where the Authority requests supplementary information, the time limit laid down in paragraph 1 is suspended until that information has been provided.

3.

The Authority shall:

(a)

verify that the information and documents submitted by the applicant are in accordance with Article 17(5), in which case the application shall be regarded as valid;

(b)

inform the applicant, the Commission and the Member States if the application is not valid.

4.

The opinion of the Authority shall include the following information:

(a)

the identification and address of the applicant;

(b)

the number assigned in table 1 of Annex I of the suitable recycling technology the process uses;

(c)

a short description of the recycling process including a short description of the required pre-processing and post-processing stages, a characterisation of the plastic input, and conditions and limitations of use of the output;

(d)

a process flow diagram of the decontamination process that discerns the order of the distinct unit operations that the Authority has evaluated together with a description of each of these operations and how any parameters critical to their operation are controlled;

(e)

a scientific evaluation of the decontamination efficiency in accordance with the guidance set out in Article 20(2);

(f)

a discussion and conclusion on whether the recycling process can manufacture recycled plastic materials and articles that comply with Article 3 of Regulation (EC) No 1935/2004 and are microbiologically safe, including a reasoning justifying restrictions and specifications that should in the opinion of the Authority apply to the plastic input, the configuration and operation of the decontamination process and the use of the recycled plastic and recycled plastic materials and articles;

(g)

where appropriate, any recommendations concerning monitoring of the compliance of the recycling process with the conditions of the authorisation.

  • Regulation (EU) 2025/2269Lawamends

    В член 14, параграф 4 и член 18, параграф 1 от Регламент (ЕС) 2022/1616 се предвижда, че Европейският орган за безопасност на храните …