For the determination of the aerodynamic device data specified in Annex V, manufacturers of aerodynamic devices shall use the following generic geometries:
a 4x2 tractor generic geometry;
a 4x2 tractor generic geometry for volume oriented semi-trailers;
a 4x2 rigid lorry generic geometry;
a 6x2 rigid lorry generic geometry;
a semi-trailer generic geometry;
a volume oriented semi-trailer generic geometry;
a drawbar trailer generic geometry;
a volume oriented drawbar trailer generic geometry;
a centre-axle trailer generic geometry;
a volume oriented centre-axle trailer generic geometry;
a rear flap generic geometry;
semi-trailer side covers generic geometry.
The Commission shall make the generic geometries referred to in paragraph 1 available free of charge in the form of downloadable .igs, .step and .stl file formats through a publicly available dedicated electronic distribution platform.