4 ANNEX IIIb REFERENCE VALUES OF THE EXTERNAL-COST CHARGE, Directive (EU) 2022/362

In forcesince 24 Feb 2022

This Annex sets out reference values of the external-cost charge, including the cost of air pollution and noise.

[“Suburban” means areas with a population density between 150 and 900 inhabitants/km2 (median population density of 300 inhabitants/km2).] [“Interurban” means areas with a population density below150 inhabitants/km2.]

Vehicle class | cent/vehicle-kilometre | Suburban | Interurban

Heavy goods vehicle having a technically permissible maximum laden mass of less than 12 tonnes

or having two axles

Euro 0 | 18,6 | 9,9

Euro I | 12,6 | 6,4

Euro II | 12,5 | 6,3

Euro III | 9,6 | 4,8

Euro IV | 7,3 | 3,4

Euro V | 4,4 | 1,8

Euro VI | 2,3 | 0,5

Less polluting than Euro VI, including zero-emission vehicles | 2,0 | 0,3

Heavy goods vehicle having a technically permissible maximum laden mass between 12 and 18 tonnes

or having three axles

Euro 0 | 24,6 | 13,7

Euro I | 15,8 | 8,4

Euro II | 15,8 | 8,4

Euro III | 12,5 | 6,6

Euro IV | 9,2 | 4,5

Euro V | 5,6 | 2,7

Euro VI | 2,8 | 0,7

Less polluting than Euro VI, including zero-emission vehicles | 2,3 | 0,3

Heavy goods vehicle having a technically permissible maximum laden mass between 18 and 32 tonnes

or having four axles

Euro 0 | 27,8 | 15,8

Euro I | 20,4 | 11,3

Euro II | 20,4 | 11,2

Euro III | 16,3 | 8,9

Euro IV | 11,8 | 6,0

Euro V | 6,6 | 3,4

Euro VI | 3,1 | 0,8

Less polluting than Euro VI, including zero-emission vehicles | 2,5 | 0,3

Heavy goods vehicle having a technically permissible maximum laden mass above 32 tonnes

or having 5 or more axles

Euro 0 | 33,5 | 19,4

Euro I | 25,0 | 14,1

Euro II | 24,9 | 13,9

Euro III | 20,1 | 11,1

Euro IV | 14,2 | 7,5

Euro V | 7,6 | 3,8

Euro VI | 3,4 | 0,8

Less polluting than Euro VI, including zero-emission vehicles | 2,8 | 0,3

The values of Table 1 may be multiplied by a factor of up to 2 in mountain areas and around agglomerations to the extent that it is justified by lower dispersion, the gradient of roads, altitude or temperature inversions. If there is scientific evidence for a higher mountain or agglomeration factor, this reference value can be increased based on a detailed justification.