1 ANNEX, Directive (EU) 2022/362

In forcesince 24 Feb 2022
(1)

In point 3 of Annex 0 to Directive 1999/62/EC, the following Table is added:

‘Euro VI Emission Limits

PIPositive Ignition.

CICompression Ignition.

(1)

The admissible level of NO2 component in the NOx limit value may be defined at a later stage.’;

Limit values

CO

(mg/kWh)

THC

(mg/kWh)

NMHC

(mg/kWh)

CH4

(mg/kWh)

NOX (1)

(mg/kWh)

NH3

(ppm)

PM mass

(mg/kWh)

PM number

(#/kWh)

WHSC (CI) | 1500 | 130 | | | 400 | 10 | 10 | 8,0 x 1011

WHTC (CI) | 4000 | 160 | | | 460 | 10 | 10 | 6,0 x 1011

WHTC (PI) | 4000 | | 160 | 500 | 460 | 10 | 10 | 6,0 x 1011

(2)

Annex II to Directive 1999/62/EC is replaced by the following:

‘’;

(3)

Annex III to Directive 1999/62/EC is amended as follows:

(a)

in point 2.1., the sixth indent is replaced by the following:

‘– Costs shall be apportioned to heavy-duty vehicles on an objective and transparent basis taking account of the proportion of heavy-duty vehicle traffic to be carried on the network and the associated costs. The vehicle kilometres travelled by heavy-duty vehicles may for this purpose be adjusted by objectively justified "equivalence factors" such as those set out in point 4 [The application of equivalence factors by Member States may take account of road construction developed on a phased basis or using a long life cycle approach.].’;

(b)

in point 2.2., the second indent is replaced by the following:

‘– Such costs shall be apportioned between heavy-duty vehicles and other traffic on the basis of actual and forecast shares of vehicle kilometres and may be adjusted by objectively justified equivalence factors such as those set out in point 4.’;

(c)

in point 4, the heading is replaced by the following:

‘4. Share of heavy-duty vehicle traffic, equivalence factors and correction mechanism’;

(d)

in point 4, the first indent is replaced by the following:

‘– The calculation of tolls shall be based on actual or forecast shares of heavy-duty vehicle kilometres adjusted, if desired, by equivalence factors, to make due allowance for the increased costs of constructing and repairing infrastructure for use by heavy-duty vehicles.’;

(4)

Annex IIIa to Directive 1999/62/EC is replaced by the following:

‘’;

(5)

Annex IIIb to Directive 1999/62/EC is replaced by the following:

‘’;

(6)

the following Annex is added to Directive 1999/62/EC:

‘’;

(7)

in Annex IV to Directive 1999/62/EC, the Table ‘Vehicle combinations (articulated vehicles and road trains)’ is replaced by the following:

‘Vehicle combinations (articulated vehicles and road trains)

Driving axles with air suspension or recognised as equivalent | Other driving axle suspension systems | Damage class

Number of axles and technically permissible maximum laden mass

(in tonnes)

Number of axles and technically permissible maximum laden mass

(in tonnes)

Not less than | Less than | Not less than | Less than |

2 + 1 axles |

7,5

12

14

16

18

20

22

23

25

12

14

16

18

20

22

23

25

28

7,5

12

14

16

18

20

22

23

25

12

14

16

18

20

22

23

25

28

I

2 + 2 axles |

23

25

26

28

25

26

28

29

23

25

26

28

25

26

28

29

29 | 31 | 29 | 31 | II

31 | 33 | 31 | 33 |

33

36

36

38

33 | 36 | III

2 + 3 axles | II

36

38

38

40

36 | 38 |

38 | 40 | III

2 + 4 axles | II

36

38

38

40

36 | 38 |

38 | 40 | III

3 + 1 axles | II

30

32

32

35

30 | 32 |

32 | 35 | III

3 + 2 axles | II

36

38

38

40

36 | 38 |

38

40

40

44

III

40 | 44 | | |

3 + 3 axles |

36

38

38

40

36 | 38 | I

38 | 40 | II

40 | 44 | 40 | 44 |

7 axles

40 | 50 | 40 | 50 | II

50 | 60 | 50 | 60 | III

60 | | 60 |

At least 8 axles

40 | 50 | 40 | 50 | I

50 | 60 | 50 | 60 | II

60 | 60 | III’;

(8)

the following Annexes are added to Directive 1999/62/EC:

‘

’.