1 ANNEX EU Ecolabel criteria for awarding the EU Ecolabel to growing media and soil improvers, Decision_act (EU) 2022/1244

In forcesince 13 Jul 2022

The criteria for awarding the EU Ecolabel to growing media and soil improvers, and their applicability to each type of product covered by the scope, are as follows:

[Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 (OJ L 353, 31.12.2008, p. 1).] [Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).]

Criterion | Growing media | Soil improvers

1 – Components | x | x

1.1 – Organic components of the product | x | x

2 – Mineral components | x | x

2.1 – Energy consumption and CO2 emissions during the manufacture of mineral growing media | x |

2.2 – Sources of mineral extraction | x | x

2.3 – Mineral growing media use and after use | x |

3 – Organic components and recycled/recovered materials in growing media | x |

4 – Restricted substances | x | x

4.1 – Limits for heavy metals | x | x

4.2 – Limits for polycyclic aromatic hydrocarbons (PAHs) | x | x

4.3 – Restrictions on substances and mixtures classified as hazardous under Regulation (EC) No 1272/2008 of the European Parliament and of the Council | x | x

4.4 – Restrictions on substances of very high concern (SVHCs) as identified under Regulation (EC) No 1907/2006 of the European Parliament and of the Council | x | x

4.5 – Microbiological criteria | x | x

5 – Fitness for use | x | x

5.1 – Stability | x | x

5.2 – Macroscopic impurities | x | x

5.3 – Organic matter and dry matter in soil improvers | | x

5.4 – Viable weed seeds and plant propagules | x | x

5.5 – Plant response | x | x

6 – Growing media features | x |

6.1 – Electrical conductivity | x |

6.2 – Sodium content | x |

6.3 – Chloride content | x |

7 – Provision of information | x | x

7.1 – Soil improvers | | x

7.2 – Growing media | x |

8 – Information appearing on the EU Ecolabel | x | x

For the EU Ecolabel to be awarded to a specific product, applicants must comply with each requirement.

Specific assessment and verification requirements are indicated under each criterion.

Where the applicant is required to provide declarations, documentation, analyses, test reports, or other evidence to show compliance with the criteria, these may originate from the applicant and/or their supplier(s) as appropriate.

Competent bodies shall preferentially recognise attestations that are issued by bodies accredited in accordance with the relevant harmonised standard for testing and calibration laboratories, and verifications by bodies that are accredited in accordance with the relevant harmonised standard for bodies certifying products, processes and services.

Where appropriate, test and sampling methods other than those indicated for each criterion may be used if the competent body assessing the application accepts their equivalence.

Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications.

Changes in suppliers and production sites pertaining to products to which the EU Ecolabel has been granted shall be notified to competent bodies, together with supporting information to enable verification of continued compliance with the criteria.

As a prerequisite, the product must meet the relevant requirements in Regulation (EU) 2019/1009 or the legal requirements of the Member State in which the product is intended to be placed on the market. In the latter case, the applicant shall declare the product’s compliance with this requirement.

The sampling shall be carried out in accordance with EN 12579 (Soil improvers and growing media – Sampling). Samples are be prepared in accordance with EN 13040 (Soil improvers and growing media – Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density).

Once available, test and sampling methods shall be conducted in accordance with the corresponding harmonised standards, the references of which have been published in the Official Journal of the European Union in accordance with Article 13 of Regulation (EU) 2019/1009.

For the application year, the sampling and test frequency shall fulfil the requirements set down in Appendix 1. For the following years, the sampling and test frequency of products shall fulfil the requirements set down in Appendix 2. Different sampling and testing frequencies are set for the following types of plants:

Type 1: Treatment plants for waste or for animal by-products,

Type 2: Product manufacture plants using materials from Type 1 plants, and

Type 3: Product manufacture plants not using materials from Type 1 plants.

For Type 2 plants, the sampling and test frequencies for the application year and the following years will be the same as the frequencies set for Type 3, if the supplied materials derived from waste/animal by-products comply with the EU Ecolabel criteria for growing media and soil improvers. The applicant shall provide the competent body with the test reports from the suppliers, together with the documentation, to ensure the compliance of the supplied material with the EU Ecolabel criteria. The competent body may recognise the sampling and testing frequencies under national legislation and standards as valid to ensure compliance with the EU Ecolabel criteria of the supplied materials derived from waste or animal by-products.

A written confirmation from the applicant that all the criteria are fulfilled shall also be required for the assessment.

An EU fertilising product is a fertilising product that is CE marked when made available on the market. If the product is an EU fertilising product, the following documentation shall be delivered to the competent body: the EU declaration of conformity; the technical documentation; and, where applicable, the documents issued by a notified body involved in the conformity assessment procedure of the product.

For the purposes of this Annex, the following definitions shall apply:

(1)

‘annual input’ means the annual quantity of materials treated in a waste or animal by-product treatment plant;

(2)

‘annual output’ means the annual quantity of products composed of the same components;

(3)

‘batch’ means a quantity of goods manufactured by the same process under the same conditions and labelled in the same manner and is assumed to have the same characteristics;

(4)

‘bio-waste’ means biodegradable garden and park waste, food and kitchen waste from households, offices, restaurants, wholesale, canteens, caterers and retail premises and comparable waste from food processing plants, including similar waste from households collected together with bio-waste;

(5)

‘component’ means the material that is used as an ingredient of the product;

(6)

‘mineral growing medium’ means a growing medium totally composed of mineral components, which is only offered for use for professional horticultural applications, as green walls and/or green roofs;

(7)

‘organic component’ means components composed primarily of carbon and molecules derived from living organisms, other than fossil fuels and materials derived from fossil fuels;

(8)

‘recovered material’ means any material that underwent any recovery operation, including preparing for re-use, recycling and backfilling, but excluding energy recovery and the reprocessing into materials that are to be used as fuels or other means to generate energy;

(9)

‘recovery’ means any operation the principal result of which is waste serving a useful purpose by replacing other materials that would otherwise have been used to fulfil a particular function, or waste being prepared to fulfil that function, in the plant or in the wider economy;

(10)

‘recycling’ means any recovery operation by which waste materials are reprocessed into products, materials or substances whether for the original or other purposes, including the reprocessing of organic material but excluding energy recovery and the reprocessing into materials that are to be used as fuels or for backfilling operations;

(11)

‘total organic carbon (TOC)’ means quantity of carbon that is converted into carbon dioxide by combustion and which is not liberated as carbon dioxide by acid treatment.

This criterion applies to growing media and soil improvers.

The components admitted shall be organic and/or mineral components.

The product shall not contain intentionally added peat.

The product may contain one or more of the following organic components:

(a)

plants, plant parts or plant extracts, derived from agricultural or forestry activities, having undergone no other processing than cutting, grinding, milling, sieving, sifting, centrifugation, pressing, drying, frost treatment, freeze-drying, extraction with water, supercritical CO2 extraction, or fiberisation at a temperature not higher than 100 °C and without any additives except water. For the purpose of this point, plants include mushrooms and algae and exclude blue-green algae (cyanobacteria);

(b)

food industry factory lime, i.e. a material from the food processing industry obtained by carbonation of organic matter, using exclusively burnt lime from natural sources;

(c)

molasses, i.e. a viscous by-product of the refining of sugar cane or sugar beets into sugar;

(d)

vinasse, i.e. a viscous by-product of the fermentation process of molasses into ethanol, ascorbic acid or other products;

(e)

distillers grains, i.e. by-products resulting from the production of alcoholic beverages;

(f)

lime from drinking water production, i.e. residue that is released by production of drinking water from groundwater or surface water and consists, mainly, of calcium carbonate;

(g)

digestate obtained through anaerobic digestion or compost obtained through aerobic composting of one or more of the materials listed below from 1 to 5.

Organic components (g) can be obtained by processing one or more of the following input materials:

(1)

bio-waste from separate collection at source, as defined in Directive 2008/98/EC of the European Parliament and of the Council [Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives (OJ L 312, 22.11.2008, p. 3).];

(2)

living or dead organisms or parts thereof that are unprocessed or processed only by manual, mechanical or gravitational means, by dissolution in water, by flotation, by extraction with water, by steam distillation or by heating solely to remove water, or which are extracted from air by any means, except:

(a)

materials originating from mixed municipal waste;

(b)

sewage sludge, industrial sludge or dredging sludge;

(c)

animal by-products or derived products falling within the scope of Regulation (EC) No 1069/2009 of the European Parliament and of the Council [Regulation (EC) No 1069/2009 of the European Parliament and of the Council of 21 October 2009 laying down health rules as regards animal by-products and derived products not intended for human consumption and repealing Regulation (EC) No 1774/2002 (Animal by-products Regulation) (OJ L 300, 14.11.2009, p. 1).] for which no end point in the manufacturing chain has been determined in accordance with Article 5(2), third subparagraph, of that Regulation;

(3)

category 2 or category 3 materials or derived products thereof, in accordance with the conditions set out in Article 32(1) and (2) and in the measures referred to in Article 32(3) of Regulation (EC) No 1069/2009, provided that the end point in the manufacturing chain has been determined, in accordance with Article 5(2), third subparagraph, of that Regulation, and reached before placing the product on the market;

(4)

sludges that comply with both of the following two conditions:

I.

they are identified as one of the following types of waste [Types of wastes and reference codes as identified in Commission Decision 2000/532/EC of 3 May 2000 replacing Decision 94/3/EC establishing a list of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste and Council Decision 94/904/EC establishing a list of hazardous waste pursuant to Article 1(4) of Council Directive 91/689/EEC on hazardous waste (OJ L 226, 6.9.2000, p. 3).]:

0203 05 sludges from on-site effluent treatment in the preparation and processing of fruit, vegetables, cereals, edible oils, cocoa, coffee, tea and tobacco, conserve production, yeast and yeast extract production, molasses preparation and fermentation;

0204 03 sludges from on-site effluent treatment in sugar processing;

0205 02 sludges from on-site effluent treatment in the dairy products industry;

0206 03 sludges from on-site effluent treatment in the baking and confectionery industry;

0207 05 sludges from on-site effluent treatment in the production of alcoholic and non-alcoholic beverages (except coffee, tea and cocoa);

II.

they are single-source separated, meaning that there has been no mixing with effluents or sludges outside a specific production process.

(5)

digestate obtained through anaerobic digestion or compost obtained through aerobic composting of any of the materials indicated in points 1, 2, 3 and 4 of this list.

The applicant shall provide the competent body with the list of all components of the product.

The applicant shall provide the competent body with the information about the origin of each organic component of the product and a declaration of compliance with the requirements of Criterion 1 of this Annex.

This criterion applies to mineral growing media only.

The manufacture of expanded minerals and mineral wool shall fulfil the following energy consumption and CO2 emissions thresholds:

energy consumption/product ≤ 11 GJ/t product, in primary energy, and

CO2 emissions/product ≤ 0,7 t CO2/t product.

‘Product’ refers to the mineral wool in any of the forms placed on the market (e.g. slabs, cubes, plugs).

The ratio energy consumption/product shall be calculated as an annual average as follows:

ratioEnergyProduct1

ni1

Productioni•

ni1

F2.1•ElgridHcog

Ref Hη

Elcog

Ref Eη

•1PEScogi

Where:

n is the number of years of the period used to calculate the average,

i is each year of the period used to calculate the average,

Production is the production of the mineral wool or expanded minerals in tonnes in the year i,

F is the annual consumption of fuels in the production process in the year i,

Elgrid is the annual electricity consumption from the grid in the year i,

Hcog is the annual consumption of useful heat from cogeneration in the year i,

Elcog is the annual consumption of electricity from cogeneration in the year i,

Ref Ηη and Ref Εη are the reference efficiencies for the separate production of heat and electricity as defined in Directive 2012/27/EU of the European Parliament and of the Council [Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency, amending Directives 2009/125/EC and 2010/30/EU and repealing Directives 2004/8/EC and 2006/32/EC (OJ L 315, 14.11.2012, p. 1).] and calculated in accordance with Commission Delegated Regulation (EU) 2015/2402 [Commission Delegated Regulation (EU) 2015/2402 of 12 October 2015 reviewing harmonised efficiency reference values for separate production of electricity and heat in application of Directive 2012/27/EU of the European Parliament and of the Council and repealing Commission Implementing Decision 2011/877/EU (OJ L 333, 19.12.2015, p. 54).], and

PEScog is the primary energy saving of the cogeneration plant as defined in the Directive 2012/27/EU, in the year i.

The ratio CO2 emissions/production shall be calculated as an annual average as follows:

ratioCO2 emissionsProduct1

ni1

Productioni•

ni1

Direct CO2Indirect CO2i

Where:

n is the number of years of the period used to calculate the average,

i is each year of the period used to calculate the average,

Production is the mineral wool production in tonnes in the year i,

Direct CO2 is the CO2 emissions in accordance with Commission Implementing Regulation (EU) 2018/2066 [Commission Implementing Regulation (EU) 2018/2066 of 19 December 2018 on the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council and amending Commission Regulation (EU) No 601/2012 (OJ L 334, 31.12.2018, p. 1).], in the year i, and

Indirect CO2 is the indirect CO2 emissions due to final energy consumption in the year i, and shall be calculated in accordance with Commission Delegated Regulation (EU) 2019/331 [Commission Delegated Regulation (EU) 2019/331 of 19 December 2018 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (OJ L 59, 27.2.2019, p. 8).].

The direct CO2 emissions shall be monitored in accordance with Implementing Regulation (EU) 2018/2066.

The indirect CO2 emissions shall be monitored in accordance with Article 6 of Delegated Regulation (EU) 2019/331 on free allocation rules.

The period to calculate the ratios energy consumption/product and CO2 emissions/product shall be the last five years before the submission of the application. If the operation period of the plant is less than five years at the date of the submission of the application, the ratio shall be calculated as an annual average of that operation period, which shall be at least one year.

The applicant shall provide the competent body with a declaration that includes the following information:

ratio energy consumption (GJ)/product (tonne),

ratio CO2 emissions (tonne)/product (tonne),

direct CO2 emissions (tonnes) for each year of the period to calculate the average,

indirect CO2 emissions (tonnes) for each year of the period to calculate the average,

fuels consumed, consumption of each fuel (GJ), sub-process(es) of the manufacture process where they are consumed for each year of the period to calculate the average,

electricity consumption from the grid (GJ final energy) for each year of the period to calculate the average,

useful heat consumption from cogeneration (GJ final energy) for each year of the period to calculate the average,

electricity consumption from cogeneration (GJ final energy) for each year of the period to calculate the average,

reference efficiencies for separate production of heat and electricity,

primary energy saving (PES) (%) of the cogeneration for each year of the period to calculate the average, and

identification of fuels used in cogeneration and their share in the fuel mix, for each year of the period to calculate the average.

The following documents shall be provided together with the declarations:

annual emissions report in accordance with Implementing Regulation (EU) 2018/2066, for each year of the period to calculate the average,

verification report finding the annual emissions report satisfactory in accordance with Commission Implementing Regulation (EU) 2018/2067 [Commission Implementing Regulation (EU) 2018/2067 of 19 December 2018 on the verification of data and on the accreditation of verifiers pursuant to Directive 2003/87/EC of the European Parliament and of the Council (OJ L 334, 31.12.2018, p. 94).], for each year of the period to calculate the average,

records of electricity consumption from the grid provided by the supplier, for each year of the period to calculate the average, and

records of the useful heat and electricity consumption from cogeneration, both on-site and purchased, for each year of the period to calculate the average.

This criterion applies to growing media and soil improvers.

The extraction of minerals to be used as a component of an EU Ecolabel growing medium and soil improver shall only take place on sites that are covered by the following documentation:

an environmental impact assessment and, where relevant, a report in accordance with Directive 2014/52/EU of the European Parliament and of the Council [Directive 2014/52/EU of the European Parliament and of the Council of 16 April 2014 amending Directive 2011/92/EU on the assessment of the effects of certain public and private projects on the environment (OJ L 124, 25.4.2014, p. 1).],

a valid authorisation for the extraction activity issued by the relevant regional or national authority,

a rehabilitation management plan associated with the authorisation for the extraction activity,

a map indicating the location of the quarry,

a declaration of conformity with Regulation (EU) No 1143/2014 of the European Parliament and of the Council [Regulation (EU) No 1143/2014 of the European Parliament and of the Council of 22 October 2014 on the prevention and management of the introduction and spread of invasive alien species (OJ L 317, 4.11.2014, p. 35).],

a declaration of conformity with Council Directive 92/43/EEC [Council Directive 92/43/EEC of 21 May 1992 on the conservation of natural habitats and of wild fauna and flora (OJ L 206, 22.7.1992, p. 7).] (habitats) and Directive 2009/147/EC of the European Parliament and of the Council [Directive 2009/147/EC of the European Parliament and of the Council of 30 November 2009 on the conservation of wild birds (OJ L 20, 26.1.2010, p. 7).] (birds).

Regarding the last point above, in cases where extraction sites are located in Natura 2000 network areas, composed of special areas of conservation referred to in Article 3 of Directive 92/43/EEC and special protection areas as defined in Article 4 of Directive 2009/147/EC, extraction activities shall have been assessed and authorised in accordance with the provisions laid down in Article 6 of Directive 92/43/EEC and have taken into account the relevant European Commission guidance document [European Commission, Directorate-General for Environment, Guidance document on non-energy mineral extraction and Natura 2000: a summary. Publications Office, 2019, https://data.europa.eu/doi/10.2779/985239].

This article is long: the rest is at the official publication.