Recital 7, Decision_act (EU) 2020/174

In forcesince 6 Feb 2020

It is appropriate to adjust the definitions of the power consumption and the average speed in order to take into account the WLTP. However, regarding the addition to the testing methodology of a run-in procedure for the alternator, the application does not set out with sufficient precision the details for how such run-ins should be performed nor how the run-in effects should be taken into account. Moreover, it is already integral to the existing testing methodology set out in the past approval Implementing Decisions that such effects may be taken into account, where necessary, by the requirement that the efficiency of the alternator must be measured at least five times. As the efficiency of alternators is determined on the basis of the average of the measurement results, any run-in effects, positive or negative, may therefore be adequately taken into account in the final efficiency determination, where necessary by increasing the number of measurements. Against that background, it is not appropriate to complement the testing methodology with an additional specific run-in procedure such as that proposed in the application.