Recital 3, Decision_act (EU) 2020/174

In forcesince 6 Feb 2020

The technology used in 12 Volt efficient alternators converting mechanical energy into electrical energy with a certain conversion efficiency rate has already been approved for use in passenger cars by Commission Implementing Decisions 2013/341/EU [Commission Implementing Decision 2013/341/EU of 27 June 2013 on the approval of the Valeo Efficient Generation Alternator as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (OJ L 179, 29.6.2013, p. 98).], 2014/465/EU [Commission Implementing Decision 2014/465/EU of 16 July 2014 on the approval of the DENSO efficient alternator as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council and amending Commission Implementing Decision 2013/341/EU (OJ L 210, 17.7.2014, p. 17).], (EU) 2015/158 [Commission Implementing Decision (EU) 2015/158 of 30 January 2015 on the approval of two Robert Bosch GmbH high efficient alternators as the innovative technologies for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (OJ L 26, 31.1.2015, p. 31).], (EU) 2015/295 [Commission Implementing Decision (EU) 2015/295 of 24 February 2015 on the approval of the MELCO GXi efficient alternator as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (OJ L 53, 25.2.2015, p. 11).], (EU) 2015/2280 [Commission Implementing Decision (EU) 2015/2280 of 7 December 2015 on the approval of the DENSO efficient alternator as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (OJ L 322, 8.12.2015, p. 64).] and (EU) 2016/588 [Commission Implementing Decision (EU) 2016/588 of 14 April 2016 on the approval of the technology used in 12 Volt efficient alternators as an innovative technology for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council (OJ L 101, 16.4.2016, p. 25).] and for use in light commercial vehicles by Commission Implementing Decision (EU) 2018/1876 [Commission Implementing Decision (EU) 2018/1876 of 29 November 2018 on the approval of the technology used in 12 Volt efficient alternators for use in conventional combustion engine powered light commercial vehicles as an innovative technology for reducing CO2 emissions from light commercial vehicles pursuant to Regulation (EU) No 510/2011 of the European Parliament and of the Council (OJ L 306, 30.11.2018, p. 53).] (jointly referred to as ‘past approval Implementing Decisions’) as an innovative technology capable of reducing CO2 emissions in a way that is not covered by the measurements performed as part of the emissions test under the New European Driving Cycle set out in Commission Regulation (EC) No 692/2008 [Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (OJ L 199, 28.7.2008, p. 1).].