The technical documentation referred to in point 1(d) of Article 3 shall include the following elements:
a general description of the model allowing it to be unequivocally and easily identified;
references to the harmonised standards applied or other measurement standards used;
specific precautions to be taken when the model is assembled, installed, maintained or tested;
the values for the technical parameters set out in Table 11; these values are considered as the declared values for the purpose of the verification procedure in Annex IX;
the details and the results of calculations performed in accordance with Annex IV;
testing conditions if not described sufficiently in point (b);
equivalent models, if any, including model identifiers.
These elements shall also constitute the mandatory specific parts of the technical documentation that the supplier shall enter into the database, pursuant to Article 12(5) of Regulation (EU) 2017/1369.
A general description of the refrigerating appliance with direct sales function model, sufficient for it to be unequivocally and easily identified:
Product specifications
General product specifications:
Parameter | Value | Parameter | Value
Annual energy consumption (kWh/a) | x,xx | Standard annual energy consumption (kWh/a) | x,xx
Daily energy consumption (kWh/24h) | x,xxx | Ambient conditions | [Set 1/Set 2]
M | x,x | N | x,xxx
Temperature coefficient (C) | x,xx | Y | x,xx
P | x,xx | Target temperature (Tc) (°C)* | x,x
Climate class factor (CC)* | x,xx | |
Additional information:
The references of the harmonised standards or other reliable accurate and reproducible methods applied:
Where appropriate, identification and signature of the person empowered to bind the supplier:
A list of equivalent models, including model identifiers:
* Only for beverage coolers and ice-cream freezers
Additional product specifications for beverage coolers:
Parameter | Value
Gross volume (dm3 or L) | x
Ambient conditions for which the appliance is suitable (according to Table 6) | Warmest temperature (°C) | x
Relative humidity (%) | x
Additional product specifications for ice-cream freezers with [transparent lid/non-transparent lid]:
Parameter | Value
Net volume (dm3 or L) | x
Ambient conditions for which the appliance is suitable (according to Table 8) | Temperature range (°C) | Minimum | x
Maximum | x
Relative humidity range (%) | Minimum | x
Maximum | x
Additional product specifications for gelato-scooping cabinet
Parameter | Value
Total display area (m2) | x,xx
Temperature class | XY
Additional product specifications for supermarket cabinet
Parameter | Value
Total display area (m2) | x,xx
Temperature class | XY
Additional product specifications for refrigerated vending machines:
Parameter | Value
Temperature class | XY
Volume (dm3 or L) | x
Where the information included in the technical documentation for a particular model has been obtained:
from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different manufacturer; or
by calculation on the basis of design or extrapolation from another model of the same or a different manufacturer, or both,
the technical documentation shall include the details of such calculation, the assessment undertaken by the manufacturer to verify the accuracy of the calculation and, where appropriate, the declaration of identity between the models of different manufacturers.