The following disposal and recovery operations, as provided for in Annexes I and II of Directive 2008/98/EC, are permitted for the purposes of Article 7(2), when applied in such a way as to ensure that the persistent organic pollutant content is destroyed or irreversibly transformed
[Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (OJ L 334, 17.12.2010, p. 17).]
D9 | Physico-chemical treatment.
D10 | Incineration on land.
R1 | Use principally as a fuel or other means to generate energy, excluding waste containing PCBs.
R4 | Recycling/reclamation of metals and metal compounds, under the following conditions: The operations are restricted to residues from iron- and steel-making processes such as dusts or sludges from gas treatment or mill scale or zinc-containing filter dusts from steelworks, dusts from gas cleaning systems of copper smelters and similar wastes and lead-containing leaching residues of the non-ferrous metal production. Waste containing PCBs is excluded. The operations are restricted to processes for the recovery of iron and iron alloys (blast furnace, shaft furnace and hearth furnace) and non-ferrous metals (Waelz rotary kiln process, bath melting processes using vertical or horizontal furnaces), provided the facilities meet as minimum requirements the emission limit values for PCDDs and PCDFs laid down in accordance with Directive 2010/75/EU of the European Parliament and of the Council, whether or not the processes are subject to that Directive and without prejudice to the other provisions of the Directive.
Pre-treatment operation prior to destruction or irreversible transformation pursuant to this Part of this Annex may be performed, provided that a substance listed in Annex IV that is isolated from the waste during the pre-treatment is subsequently disposed of in accordance with this Part of this Annex. Where only part of a product or waste, such as waste equipment, contains or is contaminated with persistent organic pollutants, it shall be separated and then disposed of in accordance with the requirements of this Regulation. In addition, repackaging and temporary storage operations may be performed prior to such pre-treatment or prior to destruction or irreversible transformation pursuant to this part of this Annex.
The following operations are permitted for the purposes of Article 7(4)(b) in respect of the wastes specified, defined by the six-digit code as classified in Commission Decision 2000/532/EC [Commission Decision 2000/532/EC of 3 May 2000 replacing Decision 94/3/EC establishing a list of wastes pursuant to Article 1(a) of Council Directive 75/442/EEC on waste and Council Decision 94/904/EC establishing a list of hazardous waste pursuant to Article 1(4) of Council Directive 91/689/EEC on hazardous waste (OJ L 226, 6.9.2000, p. 3).].
Pre-treatment operations prior to permanent storage pursuant to this part of this Annex may be performed, provided that a substance listed in Annex IV that is isolated from the waste during the pre-treatment is subsequently disposed of in accordance with Part 1 of this Annex. In addition, repackaging and temporary storage operations may be performed prior to such pre-treatment or prior to permanent storage pursuant to this part of this Annex.
[These limits apply exclusively to a landfill site for hazardous waste and do not apply to permanent underground storage facilities for hazardous waste, including salt mines.] [Any waste marked with an asterisk ‘*’ is considered as hazardous waste pursuant to Directive 2008/98/EC and is subject to the provisions of that Directive.] [‘Hexabromocyclododecane’ means hexabromocyclododecane, 1,2,5,6,9,10-hexabromocyclododecane and its main diastereoisomers: alpha- hexabromocyclododecane, beta- hexabromocyclododecane and gamma- hexabromocyclododecane.] [Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste (OJ L 182, 16.7.1999, p. 1).] [Council Decision 2003/33/EC of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC (OJ L 11, 16.1.2003, p. 27).] [The calculation method laid down in European standards EN 12766-1 and EN 12766-2 shall apply.]
Wastes as classified in Decision 2000/532/EC | Maximum concentration limits of substances listed in Annex IV | Operation
10 | WASTES FROM THERMAL PROCESSES |
Alkanes C10-C13, chloro (short-chain chlorinated paraffins) (SCCPs): 10000 mg/kg;
Aldrin: 5000 mg/kg;
Chlordane: 5000 mg/kg;
Chlordecone: 5000 mg/kg;
DDT (1,1,1-trichloro-2,2-bis (4-chlorophenyl) ethane): 5000 mg/kg;
Dieldrin: 5000 mg/kg;
Endosulfan: 5000 mg/kg;
Endrin: 5000 mg/kg;
Heptachlor: 5000 mg/kg;
Hexabromobiphenyl: 5000 mg/kg;
Hexabromocyclododecane: 1000 mg/kg;
Hexachlorobenzene: 5000 mg/kg;
Hexachlorobutadiene: 1000 mg/kg;
Hexachlorocyclohexanes, including lindane: 5000 mg/kg;
Mirex: 5000 mg/kg;
Pentachlorobenzene: 5000 mg/kg;
Perfluorooctane sulfonic acid and its derivatives (PFOS) (C8F17SO2X) (X = OH, Metal salt (O-M+), halide, amide, and other derivatives including polymers): 50 mg/kg;
Polychlorinated Biphenyls (PCB): 50 mg/kg;
Polychlorinated dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls (dl-PCBs): 5 mg/kg;
Polychlorinated naphthalenes (*): 1000 mg/kg;
Sum of the concentrations of tetrabromodiphenyl ether (C12H6Br4O), pentabromodiphenyl ether (C12H5Br5O), hexabromodiphenyl ether (C12H4Br6O), heptabromodiphenyl ether (C12H3Br7O) and decabromodiphenyl ether (C12Br10O): 10000 mg/kg;
Toxaphene: 5000 mg/kg;
Pentachlorophenol, its salts and esters: 1000 mg/kg;
Dicofol: 5000 mg/kg;
Perfluorooctanoic acid (PFOA), its salts and PFOA-related compounds: 50 mg/kg (PFOA and its salts), 2000 mg/kg (PFOA-related compounds);
Perfluorohexane sulfonic acid (PFHxS), its salts and PFHxS-related compounds:
50 mg/kg (PFHxS and its salts), 2000 mg/kg (PFHxS-related compounds).
Permanent storage shall be allowed only when all the following conditions are met:
The storage takes place in one of the following locations:
safe, deep, underground, hard rock formations,
salt mines,
a landfill site for hazardous waste, provided that the waste is solidified or partly stabilised where technically feasible as required for classification of the waste in subchapter 19 03 of Decision 2000/532/EC.
The provisions of Council Directive 1999/31/EC and Council Decision 2003/33/EC were respected.
It has been demonstrated that the selected operation is environmentally preferable.
10 01 | Wastes from power stations and other combustion plants (except 19)
10 01 03 | Fly ash from peat and untreated wood
10 01 14 * | Bottom ash, slag and boiler dust from co-incineration containing hazardous substances
10 01 16 * | Fly ash from co-incineration containing hazardous substances
10 02 | Wastes from the iron and steel industry
10 02 07 * | Solid wastes from gas treatment containing hazardous substances
10 03 | Wastes from aluminium thermal metallurgy
10 03 04 * | Primary production slags
10 03 08 * | Salt slags from secondary production
10 03 09 * | Black drosses from secondary production
10 03 19 * | Flue-gas dust containing hazardous substances
10 03 21 * | Other particulates and dust (including ball-mill dust) containing hazardous substances
10 03 29 * | Wastes from treatment of salt slags and black drosses containing hazardous substances
10 04 | Wastes from lead thermal metallurgy
10 04 01 * | Slags from primary and secondary production
10 04 02 * | Dross and skimmings from primary and secondary production
10 04 04 * | Flue-gas dust
10 04 05 * | Other particulates and dust
10 04 06 * | Solid wastes from gas treatment
10 05 | Wastes from zinc thermal metallurgy
10 05 03 * | Flue-gas dust
10 05 05 * | Solid waste from gas treatment
10 06 | Wastes from copper thermal metallurgy
10 06 03 * | Flue-gas dust
10 06 06 * | Solid wastes from gas treatment
10 08 | Wastes from other non-ferrous thermal metallurgy
10 08 08 * | Salt slag from primary and secondary production
10 08 15 * | Flue-gas dust containing hazardous substances
10 09 | Wastes from casting of ferrous pieces
10 09 09 * | Flue-gas dust containing hazardous substances
16 | WASTES NOT OTHERWISE SPECIFIED IN THE LIST
16 11 | Waste linings and refractories
16 11 01 * | Carbon-based linings and refractories from metallurgical processes containing hazardous substances
16 11 03 * | Other linings and refractories from metallurgical processes containing hazardous substances
17 | CONSTRUCTION AND DEMOLITION WASTES (INCLUDING EXCAVATED SOIL FROM CONTAMINATED SITES)
17 01 | Concrete, bricks, tiles and ceramics
17 01 06 * | Mixtures of, or separate fractions of concrete, bricks, tiles and ceramics containing hazardous substances
17 05 | Soil (including excavated soil from contaminated sites), stones and dredging spoil
17 05 03 * | Soil and stones containing hazardous substances
17 05 04 | Soil and stones other than those mentioned in 17 05 03
17 09 | Other construction and demolition wastes
17 09 02 * | Construction and demolition wastes containing PCB, excluding PCB containing equipment
17 09 03 * | Other construction and demolition wastes (including mixed wastes) containing hazardous substances
19 | WASTES FROM WASTE MANAGEMENT FACILITIES, OFF-SITE WASTE WATER TREATMENT PLANTS AND THE PREPARATION OF WATER INTENDED FOR HUMAN CONSUMPTION AND WATER FROM INDUSTRIAL USE
19 01 | Wastes from incineration or pyrolysis of waste
19 01 07 * | Solid wastes from gas treatment
19 01 11 * | Bottom ash and slag containing hazardous substances
19 01 13 * | Fly ash containing hazardous substances
19 01 15 * | Boiler dust containing hazardous substances
19 04 | Vitrified waste and waste from vitrification
19 04 02 * | Fly ash and other flue-gas treatment wastes
19 04 03 * | Non-vitrified solid phase
20 | MUNICIPAL WASTES (HOUSEHOLD WASTE AND SIMILAR COMMERCIAL, INDUSTRIAL AND INSTITUTIONAL WASTES) INCLUDING SEPARATELY COLLECTED FRACTIONS
20 01 | Separately collected fractions (except 15 01)
20 01 41 | Wastes from chimney sweeping
The maximum concentration limit of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD and PCDF) and dioxin-like polychlorinated biphenyls (dl-PCBs) shall be calculated according to the following toxic equivalency factors (TEFs):
Toxicity equivalency factors (TEFs) for PCDD, PCDF and dl-PCBs
PCDD | TEF
2,3,7,8-TeCDD | 1
1,2,3,7,8-PeCDD | 1
1,2,3,4,7,8-HxCDD | 0,1
1,2,3,6,7,8-HxCDD | 0,1
1,2,3,7,8,9-HxCDD | 0,1
1,2,3,4,6,7,8-HpCDD | 0,01
OCDD | 0,0003
PCDF | TEF
2,3,7,8-TeCDF | 0,1
1,2,3,7,8-PeCDF | 0,03
2,3,4,7,8-PeCDF | 0,3
1,2,3,4,7,8-HxCDF | 0,1
1,2,3,6,7,8-HxCDF | 0,1
1,2,3,7,8,9-HxCDF | 0,1
2,3,4,6,7,8-HxCDF | 0,1
1,2,3,4,6,7,8-HpCDF | 0,01
1,2,3,4,7,8,9-HpCDF | 0,01
OCDF | 0,0003
dl-PCBs | TEF
PCB 77 | 0,0001
PCB 81 | 0,0003
PCB 105 | 0,00003
PCB 114 | 0,00003
PCB 118 | 0,00003
PCB 123 | 0,00003
PCB 126 | 0,1
PCB 169 | 0,03
PCB 156 | 0,00003
PCB 157 | 0,00003
PCB 167 | 0,00003
PCB 189 | 0,00003